... Yep, I was thinking the same thing. Used it in college back in the late 80's. (Darn, just showed my age again!) Randy WF5X...
4932
Jeffrey
n9mxtham
Jan 2, 2011 5:30 pm
If its free why when I run it everything and everyone shows and later on it stops and only shows my station and knowone else showing up anymore?? On Sun, Jan...
4933
Lynn W Deffenbaugh (Mr)
ldeffenb
Jan 2, 2011 5:44 pm
Are there stations scrolling by on the left side? And you still have View / All checked, right? Are you using any RF interface, or only APRS-IS? What is the...
4934
Randy Love
rlove31
Jan 2, 2011 6:10 pm
Lynn, My basic understanding of the concept is more along the lines of allowing for an additional digipeat scheme that doesn't have the limitation that are ...
4935
Randy Love
rlove31
Jan 2, 2011 6:15 pm
APRSISCE = A P R S eyes-see :) Because, "I spy" doesn't quite work with the 'CE' part... Just another way of looking at it. WF5X...
4936
n1naz
Jan 2, 2011 6:32 pm
PATH TRACING USING THE SSn-N PATH: SSn-N (using the old UIFLOOD paramter at the DIGI sites), would not normally be traceable. . But if users use the path of ...
4937
James Ewen
james_ewen
Jan 2, 2011 7:08 pm
Okay, here's another one... I'm watching Don W6GPS driving across Arizona currently on aprs.fi. I also have APRSISCE/32 running. Hmm, why not watch Don in ...
4938
Lynn W Deffenbaugh (Mr)
ldeffenb
Jan 2, 2011 7:35 pm
... That's supposed to be a TM superscript, like: But I see that it's not making it into the confirmation prompt like it is in the main Find dialog. I've...
4939
James Ewen
james_ewen
Jan 2, 2011 8:00 pm
... Okay, back at a real keyboard, and I see that this discussion has gone off the rails... UIFLOOD and UITRACE are routines that were first implemented in the...
4940
James Ewen
james_ewen
Jan 2, 2011 8:32 pm
On Sun, Jan 2, 2011 at 12:35 PM, Lynn W Deffenbaugh (Mr) ... Huh... The TM works on the first screen, but not the second... ... Yeah, that's it... can you put...
4941
Steve D
sbd64000
Jan 2, 2011 9:39 pm
I can only think there is a possible configuration issue. Or hardware issue. If you want to contact me directly I will try and help out. My msn id is ...
4942
John/AF4EX
af4ex.radio
Jan 2, 2011 11:18 pm
Hi Lynn and APRSISCE Group, I just got my Jan 2011 issue of CQ magazine and noted the ad for the new Kenwood dual-bander HT with built-in GPS and APRS...
4943
tuckmeat
Jan 2, 2011 11:21 pm
I'm doing it successfully. Just configure it as the TM-D710 and it works fine. I just started having an issue which I just posted about, but for basic...
4944
tuckmeat
Jan 2, 2011 11:23 pm
Using APRSIS/32 on two different Windows 7 laptops in conjunction with a Kenwood TH-D72. I've configured the TH-D72 in APRSIS using the TM-D710 RF port...
4945
tuckmeat
Jan 2, 2011 11:33 pm
Using APRSIS/32 on two different Windows 7 laptops in conjunction with a Kenwood TH-D72. I've configured the TH-D72 in APRSIS using the TM-D710 RF port...
4946
Randy Love
rlove31
Jan 2, 2011 11:39 pm
Sounds like the radio has gotten out of sync with APRSIS putting it into the proper mode. Have you always been careful to shut down APRSIS before moving it to...
4947
Kurt Savegnago
ksaves2...
Jan 2, 2011 11:49 pm
Yeah, When setting it up, one needs to run the 72 in packet mode and use the aprsis port script for D710pkt. All will be well. The program runs fine on a...
4948
tuckmeat
Jan 3, 2011 12:34 am
OK, didn't know about the MIC-E format. That helps. I've done that procedure a few times myself to see if it would solve the problem and just did it again to...
4949
Lynn W Deffenbaugh (Mr)
ldeffenb
Jan 3, 2011 12:58 am
What do you have the Configure / General / MyCall-ssid set to in APRSISCE/32? The only reason APRSISCE/32 would set the radios MYCALL to NOCALL is if that's...
4950
tuckmeat
Jan 3, 2011 2:02 am
OK, I feel like a dufus now. :) I didn't realize that the radio's TNC would get set to NOCALL if it was configured with the same SSID as the software (is this...
4951
Alan
radionerd1
Jan 3, 2011 5:08 am
Hi Lynn, I like the message option Send RF and Send IS, but want to also control the RF path and even be able to keep some RF messages out of IS. It would be...
4952
Kevin Bosworth - W7BOZ
w7boz
Jan 3, 2011 5:36 am
Lynn, I don't really have a way 2 capture them. But running Winpack to monitor and capture all traffic. As soon as I get some data captured I will send it. ...
4953
James Ewen
james_ewen
Jan 3, 2011 10:21 am
... With everything needed in one complete package, the only thing you need to worry about is learning to operate and configure the rig, as well as figuring...
4954
Tom
nineback
Jan 3, 2011 10:34 am
Wee said. I am going through this learning curve now. The folks on these groups ahve been wonderfull. After some effort I now have my TH-72A working with...
4955
Tom
nineback
Jan 3, 2011 11:04 am
Lynn, In the wiki on map prefetch you mention "There's a menu option under View / Maps / Prefetch that will handle the prefetching of the maps". I do not see ...
4956
Lynn W Deffenbaugh (Mr)
ldeffenb
Jan 3, 2011 12:06 pm
Added to the ToDo list. Have no idea when it'll be done though! Also, please remember that RFONLY and NOGATE are simply requests. Not all APRS software and...
4957
Lynn W Deffenbaugh (Mr)
ldeffenb
Jan 3, 2011 12:11 pm
UI-View-style maps and .INF files are on the ToDo list. But then, so is a bunch of other stuff! Happy New Year 2011! Lynn (D)- KJ4ERJ - Author of APRSISCE for...
4958
Lynn W Deffenbaugh (Mr)
ldeffenb
Jan 3, 2011 12:22 pm
... As long as you have Enables / OSM Fetch Enabled checked as well as Enables / APRS-IS Enabled checked, APRSISCE/32 will fetch any required map tiles as you...
4959
Alan
radionerd1
Jan 3, 2011 1:13 pm
Been playing with the new Argent Data OT-USB and APRSIS32. It works great as a I-GATE, even as a mobile I-GATE/Tracker. The USB port KISS mode seamed to work...
4960
Tom
nineback
Jan 3, 2011 2:13 pm
Lynn, Thanks. I wll check it out after work. So I have to have APRS-IS turned on for it to automatically fetch maps? Any particular reason why you don't want...
