Couple of options here. First, are you connecting to the D710 where the radio is in control of stuff and APRSIS32 is for display only, or is APRSIS32 in full...
... Yes, the D710 can be configured as a temporary digipeater, and since you are asking, yours probably already is set up that way. The D710 comes factory...
Thanks for your replies...The TM-D710 will be the radio that is receiving the APRS data.......the computer with APRSIS will be displaying that data....now how...
... You can answer the question posed by Adam... is the D710 in control, or is APRSISCE/32 in control? If the D710 is in control, use menu 620. If APRSISCE/32...
Just to clarify Adam's question: If you're using Kwd710(APRS) as the port type, then the D710 is in control and you'd want to use the radio's functions for...
From what I'm gathering you're planning to use the D710 in Native APRS Mode as a Digipeater. Refer to http://aprsisce.wikidot.com/port:kenwood-tm-d710 for set...
... Almost. KWD710(PKT) doesn't support digipeating because the CONVerse interface of this mode doesn't support transmitting a "used" bit in the path which is...
It means just what it says, that the particular packet shown is NOT being queued onto the port listed. In this case, you probably don't have DX checked in the...
DOH, and that's why you get paid the big bucks for development *grin* so if/when Digi is required via the D710, it'll have to be a KISS port? or does the D710...
The D710 in APRS mode supports digipeating all by itself. And APRSISCE/32 can co-exist in that mode using the KWD710(APRS) port type. If you want APRSISCE/32...
Got it, which is why I use the D710 in native APRS mode as much as possible. Adam KC2ANT ... From: Lynn W Deffenbaugh (Mr) Sent: 3 Mar 2013 00:04:21 GMT To:...
... Nope, I said Menu 620... not 618 nor 619. ... 618 is a simple alias substitution routine, and should be left off if you are going to enable 620 on WIDE. ...
Thanks to all for the assistance. All set. I'll leave APRSIS out of the digipeating picture and rely only on the TM-D710 to be the WIDE1-1 digi. No further...
APRSIS32 still makes a great display medium for events, don't give up on it for that aspect. Adam KC2ANT ... From: w1gtt Sent: 3 Mar 2013 02:05:49 GMT To:...
Hi Lynn, Ok, good guess. Dx is not checked. I expect I just used the defaults when I set this up, and am guessing it's not checked by default. Not really sure...
Lynn Can you setup the program so it, possibly optionally, minimizes to the system tray rather than staying in the task bar when minimized? It would just...
Hi Greg, The DX report just gives you what the furthest recently heard station was with distance and bearing. If you send the query ?DX to a station it will...
I think it would depend on which version of Windows or the OS you have. In Win-7 I have an option of either 'hiding' the icon in the sys-tray of 'pin' it to...
Lynn I'd like the ability to customize the path only when sending messages. And/or maybe a specific message. And/or maybe a specific message to a given...
It's up and going now, but after several days of running alright John got a Error 31. What's that ? I put a photo of the Port Log showing before / after then...
Just for giggles I tried out the UZ7HO program as an input port for APRSIS. Why not, I had one of those USB tuner dongles sitting around. Our amateur radio...
Another software modem you might try is Dire Wolf has some inovateive error correction. And the author is open to suggestions on adding features when he gets...
... Could you tell us a bit more about these USB tuner dongles? Specifically make and model so I can poke about a bit on the Internet? Is this the kind of...
The one some around here have been using is on Amazon. I haven't tried it yet. http://www.amazon.com/gp/product/B008DCBS94/ref=cm_cr_ryp_prd_ttl_sol_1 ... -- ...
Hello Every Body, Today I did agian some work with APRSIS32 Development version and my SoundDoppler Program. I saw that the bug in CSE/SPD/BRG/NRQ For...
i'm gunna get there before lynn does, have you got examples of packets where it's wrong? Not easy to fix where you don't have example data :P charlie...
