APRSISCE/32 treats objects based on their owner and stations as owning themselves. Prior to launch, someone (I noticed, but forget who) beaconed a K6RPT-12...
Ah. Ok, that explains it. I just saw it go by on the scroller, and did a multi-track from there. Sure enough, thar it be. Greg KO6TH p.s. When I first did a...
Crossing into Nevada... I've been copying it direct (at ~240 miles distance!), as well as through our high level Digi, thanks to the Digi-enabled path it's...
... I count 140 packets from the balloon gated by your station... none of them shown on aprs.fi though. ... The zig zags are due to GPS lock losses. Multiple...
Just wait till it gets over a heavily populated area like the ... eastern section of the USA! I have been working with the local Boy Scout troop as a Merit...
In the unlikely event it carries on with the same track I shall be hearing it, hopefully it will survive that long Steve Daniels Amateur Radio Callsign G6UIM ...
It's predicted to cross central England 18:00z tomorrow I shall be monitoring on 144.390MHz those of you in the UK please attempt to track Steve Daniels ...
Should come into range around 12:00UTC anyone know of any stations in Western France who would switch frequency? Steve Daniels Amateur Radio Callsign G6UIM ...
Isn't France the country that doesn't allow Internet connected amateur radio? If so, then they won't have any IGates. From a View / Transport / IGate they...
Well DSTAR is illegal in France because of the codec and the internet connection so it may well be they are not allowed Steve Daniels Amateur Radio Callsign...
With the footprint we're seeing at-altitude, France shouldn't be that big of a problem. OF course, if it's descending. all bets are off. Mike WM4B From:...
On Mon, 03 Dec 2012 22:20:02 +0100, Steve Daniels ... I think they got permision for DStar a few months or so ago, not 100% sure, but I don't see why an RX...
If it comes across further North and is picked up by UK stations then Dutch stations monitoring would be good also. Just sent the following to a lot of...
Ran the updated program today. It ran great, connected to the TNC, Kam Plus, Via usb cable, ran great for about 30 minutes, then the blue screen came. ...
Blue screens cannot be caused by user-mode code like APRSISCE/32, but only by drivers like the one that probably supports your USB to serial adapter. See if...
It's been more than a half an hour since the last packet hit aprs.fi. Any news from our European compatriots tracking the thing? 2012/12/3 Steve Daniels...
APRSIS32+AGWPE RX only I-Gate on 144.390MHz launched at my QTH this morning. Hopefully balloon survived and it's equipment works well and... it will choose...
Hello Dear firends I am in RX 144.390 ARPS I am in S/E France heard somes trames by moment but can not decoded it.I am also on track map but seems that the...
Thank you Lynn. I updated SM Bus Controller and I am looking for an update to the radioshack USB to serial cable for XP. I am trying to test out a belkin...
Any update? It looks like last tx was about 10 hours ago. Larry Overcast Sent from my iPhone ... Any update? It looks like last tx was about 10 hours ago....
I've had the best results with the one from Keyspan (now owned by Tripp Lite). One fringe benefit: it will keep the same com port number regardless of which...
Now we wait. Hopefully there's some IGates switched over to 144.390 along the West coast of Europe and in the Azores. The balloon was slowing as it went out...
Here in Poland we have number of active I-Gates today on 144.390, but it’s far from all Europe west coast so we’ll not be first who hopefully will hear it....
I'm monitoring 144.390 just in case it appears this far North. 73, Colin M0XSD. ... I'm monitoring 144.390 just in case it appears this far North. 73, Colin ...
Lynn, Thanks for the info, I sent you a direct email (some additional questions). One more thing I wanted to ask as I become familiar with your program- on the...
Hi all, ... I'd had a similar problem with a Belkin USB <> Serial adapter until someone suggested I check Micro$oft's "Hardware Compatibility List" before...