Is it possible to do the same with AGWPE; TX on port 1 and receive all other ports just now? I use AGWPE to control my KAM, Tiny2, and soundcard all at the...
Yes, APRSISCE/32 should receive anything that comes in from AGWPE, but will only transmit on the first configured port. Are you running the general release or...
Hello, I was a little confused when I enabled call sign labels and then zoomed out they seemed to dissapear, zoomed back in and the re appeared, zoomed out and...
Yes, WAD - Working as designed See also Configure / Screen / Label / Max Visible and set it to whatever level of crowding you can handle. And if you want to...
You all work too cheap! Every time I turn around, Steve's asking me to double his salary! Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32...
I am using the general release. When I configure APRSIS32 to connect directly to the KAM TNC via KISS it receives on both ports, and transmits on port 1. But...
As my TNC's (Hardware/soundcard) are controlled by AGWPE, I have another program running called 'AGWmonitor' solely for the Mheard list. It lists all the...
If you open up Enables / View Logs / <YourAGWPortName> and enable it, what does it say when you receive data on the other AGW ports? vs what does it say in...
Even if APRSISCE/32 had a similar MHEARD list or station table, it would still not show what you're after. When a station ages out of APRSISCE/32 due to not...
Yes, because there is no such thing as a "standard" Windows CE 6.0. Every manufacturer has the option to select what is and is not included in a CE 6.0 build...
It's time again to resurrect some knowledge from the past related to CE vs Windows Mobile and why devices such as this aren't really as attractive as they...
Before when I used UI-View as my VHF IGate, I still required the use of AWGmonitor for the reason you have just pointed out. The Mheard list in UI-view would...
I thought I would stop as you have doubled it several times, especially due to the upcoming 50% bonus Steve Daniels G6UIM Torbay Freecycle Moderator _____ ...
KB1NVY wrote... ... Your callsign was embedded in your email address, so I could at least look and see what SSIDs you were using. The station in question...
... issues with my station and APRSIS32. I have tried to digest all the suggestions and corrective actions put forward by the group, and believe I have...
I am obviously new to APRSIS since I joined yesterday. I currently have a laptop showing on my map. Since my Kenwood D72 is running as a Wx station, naturally...
OK, I found the place to change to the WX icon. Sorry, did not look enough. Would still like to have some suggestions on my other question. Burt AF5AA...
But you forgot the Windows 7 aspect -> as long as your on your Windows disertation . . . KJ4ERJ> For those of you that might still be wondering about...
Windows Phone 7 is completely different than Windows Mobile as well. Windows Phone 7, as I understand it, requires all programs to be written as "managed code"...
Greetings WIKI authors (minus Lynn who should be adding APRSISCE/32 features), All of this might be useful to add to the WIKI so that in the future a link can...
I have a Windows Phone 7 mobile. I really don’t like the new system, it requires you to sync using Windows Live – which exposes all your contacts, emails...
... Okay... I had a look at aprs.fi for your stations: http://aprs.fi/?call=kc2nyu* Nothing is being sent out from any of your stations that might be currently...
James, you hit the nail on the head. He needs to put in the proper APRS-IS passcode for Igating to work. I'm seeing traffic via my direct RF logging feed, but...
Burt AF5AA wrote... ... Per your later message, you have the WX symbol now selected. ... http://aprs.fi/info/AF5AA%2A With what callsign-SSID are you not...
Replies embedded in bold ... to turn on AGWTracker ... I checked also and saw the same bad information. I have had APRSIS32 running since mid-day ... then ... ...
If you could e-mail your APRSIS32.XML file to KJ4ERJ@..., I'll take a look at it and see if I can figure out the APRS-IS thing. Your RF port is working...
