Guy, ... That's not an Airmail message, it must be coming from the modem. But which modem? Can you send the text for the entire connection? (If it is no longer...
I just purchased a license for the Pactor III firmware for my SCS PTC PROII. The firmware in thr proII is currently 3.2c. I assume that I need to upgrade that...
Dave, ... Odd- the production release was 3.2d, not c. But yes, in any case I would definitely recommend updating the firmware to 3.3c. Your 3.2 version is for...
1. 3.3c is fine. 2. Use Airmail for sure... 3. Below are instructions: Installing the Pactor III license code: Airmail offers three alternate ways to enter the...
k4cjx@...
Jun 10, 2004 3:20 pm
806
d is out? ... From: Jim Corenman [mailto:ke6rk-3@...] Sent: Thursday, June 10, 2004 09:53 To: AirMail2000 group Subject: Re: [airmail2000] Help...
k4cjx@...
Jun 10, 2004 3:43 pm
807
Steve, ... No, not 3.3d. I was referring to 3.2d, which was the SCS production release for the second half of last year and was replaced by 3.3c. I would...
Yes, it will be out this next month, I think. And, you are correct, it will be 3.4. I lost the info that we received so my timing could be off. Steve ... From:...
k4cjx@...
Jun 10, 2004 6:27 pm
809
OK I used the file from the airmail page to update the firmware in my ptcpro2. All is well firmware is now 3.3c. However I don't seem to be able to get the...
1. Go into the Airmail menu "Tools>Dumb Terminal" menu. 2. Then click on "Reset Host." 3. When you see the "CMD" put the entire "LICENSE, ETC" in by hand...
k4cjx@...
Jun 10, 2004 8:06 pm
811
Steve, It is not necessary to use the dumb-terminal window. It works, but I what Dave did (paste it into the License-code box in "advanced settings") works...
Thanks, did not realize the last option was available. Steve ... From: Jim Corenman [mailto:ke6rk-3@...] Sent: Thursday, June 10, 2004 16:49 To:...
k4cjx@...
Jun 10, 2004 10:57 pm
813
I upgraded to the new version of airmail and got my firmware upgraded in the proII. I still have license issues because the license for P3 I got from scs does...
Ok, thanks for the step by step but I just went through this again multiple times to make sure it is not me... and yes I am using the whole license string...
I upgraded to the new version of airmail and got my firmware upgraded in the proII. I still have license issues because the license for P3 I got from scs does...
Contact whoever sold you the license and tell them this story. Steve, k4cjx ... From: Dave Fuller [mailto:rfcdma@...] Sent: Saturday, June 12, 2004 21:30...
k4cjx@...
Jun 13, 2004 2:48 am
818
Rick was out of town (KN6KB is the station you checked in on, so he is the station to permanently establish your call) so I fixed your call so you are okay now...
k4cjx@...
Jun 13, 2004 3:02 am
819
Dave, ... Ham license. Odd, I thought extra-class came with HF privileges. Steve, you there?? ... No worries, a week is tons of time. ... It's the weekend in...
Very good THANK YOU Now works now on P2...finally back to where I was before I started this adventure! :) had to bring the modem and laptop back in the house...
Dave, ... Thanks for sending all the info. I agree, it looks like the only problem is that the serial# got truncated somehow. If fixing the serial# in the...
Jim, The license code was bad as we knew...and I got the correct one installed today. I just send my first P3 emails. Thanks everyone for all the help. -Dave...
Hi: Is there a way to change Airmail's (ver. 3.1.936) fonts - particularly in the packet terminal module? I'd like a fixed pitch font when I log into a BBS...
I am trying to get the scanning program in Winlink Classic running with my Kenwood TS-570D (just converted from MSYS :-). I set the com port to COM2, and the...
... Howdy John, If you're still wondering about cabling, verify (to some degree of certainty) that the interface is operating properly with another control...
If you are attemptin to stop the Scan, you must use the ckt with the capacitor per the instructions in the scanner help file. Steve, k4cjx ... From: Guy...
k4cjx@...
Jul 20, 2004 11:55 am
827
I'm a relatively new user of Airmail and the Winlink system and would appreciate advice on the following. I'm headed to Africa for a DXpedition and will be...
hi Neil, ... the problem with prefixes and suffixes in Pactor is common and there is often a problem because some combinations exceed the allowed length of the...
Check with the country that you obtained the license in and with those that you are going. Steve, k4cjx ... From: Neil King [mailto:neil.king@...] Sent:...
k4cjx@...
Jul 21, 2004 12:20 pm
830
Once you determine the proper legal process, go into Airmail menu "Window>Winlink 2000>Options Message" and set your Prefix/Suffix there. There will be no...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
