I was just wondering what the "Bulletin" folder is for in Airmail, since any of the bulletins I subsribe to arrive in the Inbox folder. I am missing...
Marc, ... That was used for bulletins downloaded from earlier systems (e.g. "Classic" Winlink) where bulletins were a special message-type. With Winlink-2000,...
Joe, ... Be aware that "Airmail.net" is no relation to Airmail software, or airmail2000.com. It is one the multitude of domains gobbled up by the web-email...
Yes and it was undeliverable. I thought vco137 might have some significance like VE or airmail.net might have been an old airmail2000.com domain. Joe...
Joe, The reflector you sent your message to is ham radio related. Airmail.net is not related to this site whatsoever. Does he have a ham radio callsign, or...
Hi, I am trying to access Winlink using an icom 706MKIIG and a PTC-IIex. The radio-modem connection appears to work well under Airmail 3 (running in an Old...
1. change baud rate to 4800 and put the hex number to 00 (two zeros.) If it works, then change the baud rate back up again. Make sure that you have the ...
k4cjx@...
May 7, 2004 1:04 pm
792
José, ... This is a mystery, your settings appear correct and there are no software problems. To add a bit to Steve's response: You didn't say what version...
Steve and Jim - Swapping com ports, twiching the baud rate and other radio settings in Airmail as you suggested seem to have finally convinced Airmail to...
José, ... Yes. The radio's address is specified by a setting in the radio's "Set Mode" menu. For the mkII"G" it is "CI-V Address" and you are correct, the...
Hello!, If anyone cares, here's the complete NTSD matrix for entry into a file called "System.HAM.ini" under the Tab: "Frequency List". 73, Guy - W6MSU ...
They must be sent to you. Steve, k4cjx ... From: kb0rpj [mailto:kb0rpj@...] Sent: Tuesday, May 11, 2004 22:35 To: airmail2000@yahoogroups.com Subject:...
k4cjx@...
May 13, 2004 3:07 pm
799
The problem has been solved. As in most cases, the solution - after it was found - appears to be quite obvious. Here is a brief account: I had difficulty in...
I recently installed version 3.1.936 of Airmail. I am running MS Win 2k and Net Framework with all the latest updates. I access a local Telpac node via VHF...
Guy, ... That's not an Airmail message, it must be coming from the modem. But which modem? Can you send the text for the entire connection? (If it is no longer...
I just purchased a license for the Pactor III firmware for my SCS PTC PROII. The firmware in thr proII is currently 3.2c. I assume that I need to upgrade that...
Dave, ... Odd- the production release was 3.2d, not c. But yes, in any case I would definitely recommend updating the firmware to 3.3c. Your 3.2 version is for...
1. 3.3c is fine. 2. Use Airmail for sure... 3. Below are instructions: Installing the Pactor III license code: Airmail offers three alternate ways to enter the...
k4cjx@...
Jun 10, 2004 3:20 pm
806
d is out? ... From: Jim Corenman [mailto:ke6rk-3@...] Sent: Thursday, June 10, 2004 09:53 To: AirMail2000 group Subject: Re: [airmail2000] Help...
k4cjx@...
Jun 10, 2004 3:43 pm
807
Steve, ... No, not 3.3d. I was referring to 3.2d, which was the SCS production release for the second half of last year and was replaced by 3.3c. I would...
Yes, it will be out this next month, I think. And, you are correct, it will be 3.4. I lost the info that we received so my timing could be off. Steve ... From:...
k4cjx@...
Jun 10, 2004 6:27 pm
809
OK I used the file from the airmail page to update the firmware in my ptcpro2. All is well firmware is now 3.3c. However I don't seem to be able to get the...
1. Go into the Airmail menu "Tools>Dumb Terminal" menu. 2. Then click on "Reset Host." 3. When you see the "CMD" put the entire "LICENSE, ETC" in by hand...
k4cjx@...
Jun 10, 2004 8:06 pm
811
Steve, It is not necessary to use the dumb-terminal window. It works, but I what Dave did (paste it into the License-code box in "advanced settings") works...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
