I have an ICOM 706 and a KPC3+ on which I'm using Airmail. I get an indication that the packet is initializing OK but cannot get the transceiver to transmit...
Hi to the Group The above setup, xmits and receives ok manually setting the frequency but if I change stations, to one in Airmails list, the ts-480 does not...
Hi Jihn, I hooked up my TS-480 to Airmail this past weekend, after about 6 months of not using the radio. When I changed the baud rate in Airmail under ...
John Did you get an answer to this? I run a 706 with kam+ here, no problems. Have you checked to see if the baud rate between radio and tnc is correct? Have...
Was the problem of the Kam+ using pactor resolved during my absence from the scene? Norm ... No virus found in this incoming message. Checked by AVG -...
Thanks to those, who answered, Steve, AAR6CX,Michael VE3LKI and Werner OE9FWV. The problem was my baud rate. I'm now running 9600 baud in Airmail and Kenwood....
Does anyone have the BEST setting for a running KAM+? I did a bad thing and RESET HOST and now I can not connect. Daniel Musick KG6VVN ... From: Norm...
I have been trying for some time now to get my PK232 to send and recive Pactor, I have upgraded the PK232 to the latest firmware and DSP and USB port I receive...
After a reset (or battery jumer pull) I always use a terminal program set to 9600,N,8,1 and do the auto baud sequence (press *) before using it in Airmail. ...
I found it!!! And you probably won't believe this! Much to my surprise, it had nothing to do with any administrator or security issue. I was searching the net...
Alun, When you turn your PK-232 on, what software is running on your computer that tells you "SetComm State (Com4):31 Check Options setting and Connections"?...
Good Going, Great detective work! Modern system today may not be all they are cut out to be, With something as simple as what we are working with. Some of us...
I've looked back through the post and only found questions unanswered about useing Airmail on port 2 of a Kantronic 9612 tnc. UHF at 9600 baud is what I'm...
Making 9600 baud packet work right even between two carefully aligned stations is a tedious ordeal, and a real longshot on an ad hoc link. Stick with 1200 ...
... One way to obtain a workaround to this is to use the AGW packet engine to handle your 9612. In the packet engine will be two ports for your 9612. Use AMPE...
hi all, We use a Ptc-2 modem to remote control the FT-847. I don't know if this issue has been reported before, but it seems to me that Airmail's driver for...
Ref. the PK-232 problems, battery connected/disconnected, * for autobaud, etc. PK-232 or any TNC. TNC "state" problems et. al. and any TNC. APRSPoint provides...
Thanks to all who have suggested solutions to my problem. I have the KPC+ talking to the Transceiver (ICOM 706 MkIIG) ok - but still cannot get the transceiver...
What PTT scheme are you using? Some of the Icoms have a CI-V option to turn transmit on and off. The 706 doesn't and requires an addition connection to the...
On the IC 706 I think I read someplace that it has 2 separate push to talk lines at the Data plug depending on if your on HF or VHF... There must be an...
Simply ground your ptt to ground at your radio end, if the kpc keys up then that is right, but if not you don't have something wired right. Thank you 73 Kenny ...
To answer some of the queries about my problem - I am using VHF packet (with Airmail), not HF - and not PSK. I have tried setting the VOX and that does not...
is the radio set in the "Data Mode" I used to have a 706 and if memory serves I had to have it in data mode for it to work on packet 73, Chuck AC5PW ...
I must have missed the first post. I have had to make sure the ANF and NR are turned off when running vhf or hf packet with the 706. Perhaps this will help,...
I always used the mic connector as it stayed out digital instead of voice. If you short the ptt to ground at the radio and tnc doesn't show a red led lit,...
I have solved the issue and am now happily exchanging packets on air with my IC706. It turned out that the issue was with the TNC (KPC3+) which required its...
I do not seem to be able to setup the PactorIIe with my Icom-706 . All SEEMS Ok, but cannot establish contact with any station. This what TERMINAL says : <host...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
