... maybe he was looking for a FT-600 manual. There is no preset for this rig in the SCS Ptc-2 Firmware. It could really be a problem, because Yaesu changes...
Touche, Werner .... You are, of course, quit right. Re the FT-600 manual, I would opine that Charlie will have to purchase a copy from YAESU. In any event it...
... I was able to find a manual for the ft-600 on the url suggested. I have it in my hand and am in the process of buildinga cable. Thanks for your help. ...
hello, in my office I use a PTC-2e in Packet mode (no HF available) with airmail to connect to the Telpac Server. It works very good by the way, thanks to Jim...
hi Jean-Marie, ... that's what I did. The name of my files were also correct, but the fact that it works for you let me check again what might be the...
Jim, when I tried to set my Ptc-2e into Packet mode I found some errors in the Initialisation of the ptc-2e. TRX S and TRX DU commands do not exist for the...
I was acitve for a bit on Win-Link but then went inactive. I have re-installed the new version of Airmail 3.2 I have a PTC IIIe that does not have a electronic...
Dunc, ... If you have a "callsign license" for Pactor-3, then that works with any version of firmware including the current ver 3.4. SCS is no longer selling...
I just tried to update the Winlink station list for December I opened Tools, and in the "Text Format" box I deleted all the text. I then copied and pasted the...
To download a new Frequency List for inclusion in Airmail, follow the instructions below: 1. Go to Inbox and delete any previous Frequency list message...
k4cjx
k4cjx@...
Dec 11, 2004 10:22 am
1077
I am in the 30 day period where I am limited to 30 minutes a day connect time. I am curious when a "day" starts. Is it GMT? and does it start at 0001? Is it 24...
Usually depends on the PMBO, but mostly at 00:00 plus/minus a few UTC. Steve, k4cjx ... From: dfowler [mailto:Dunc.F@...] Sent: Saturday, December...
k4cjx
k4cjx@...
Dec 11, 2004 8:32 pm
1079
Hello Dunc, To clarify, the 30 minute limit is not ONLY during your initial 30 day period. The default remains 30 minutes per PMBO per day even after ...
Hello All, Can anybody tell me how to have have Airmail reset my pk-232 back into regular packet mode after exiting the packet server or the packet client? Tnx...
i have a pk900 but may also cover pk232 you can try to reset the pk232, either by a rear reset button, or off/on. or by using the restart or reinit command....
Hi. I run the latest Airmail here, and a PTC-II with the Kenwood TS-570D. How can I set up autocall ?. I mean how can I set Airmail to call at different times,...
Erik, ... Autocall is no longer supported. The problem is that the PTC-II modem cannot detect the presence of Pactor-3 signals, and interference is inevitable....
... TS-570D. How ... modem cannot detect the presence of Pactor-3 signals, and interference is inevitable. Unfortunately as signalling methods get more ...
Hello Again, Anybody know if its possible for users that connect by packet to my personal Airmail bbs/box to view/access files I can create, besides regular...
Hi All, Can anybody tell me how to get Airnail to reset my pk-232 back to packet when I exit the packet client and/or the packet server? Is there a way for me...
Hello, Does anybody know if Airmails packet client or server modules allow the use of ssid's for incoming connects? I would like to be able to set it up so...
... Did you try the controller shutdown file in the menu "Window|files|controller shutdown". You can write commands you want to be sent to the TNC on closing...
No pity..smart move. What do you do when someone calls on top of you? Steve, k4cjx ... From: aalested [mailto:erik_ja@...] Sent: Wednesday, December...
k4cjx
k4cjx@...
Dec 15, 2004 2:53 pm
1090
Ron, ... What you are talking about is a bulletin system, which Airmail does not support. But there are two files which you can edit which are available to...
Ron, ... Have you tried the "controller shutdown" file? (Window/Files menu). I'm not sure this will do what you want, I'll take a look. 73, Jim ke6rk...
Ron, ... The answer is yes for the Packet-server window, no for the packet-client. The packet-client is just that, a client for outgoing connections and only...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
