... Howdy, I don't know how many people have seen messages (like the one attached), but it's something to keep in mind... 73, Guy - W6MSU - - - - - - - - - - -...
Jim, Would it be difficult to implement support for the Kantronics-9612+ for packet? I know it works as a KPC3 does but I would like for it to use both ports....
Ken, Eric, The TNC's that are currently supported by Airmail for packet (not Pactor) are: SCS PTC-IIe/ex using built-in packet modem, PTC-II/IIpro with plug-in...
Correct Kenny, My understanding is there are plans to add support for the TNC2, and the AGWPE among others. It might work under one of those once implemented. ...
All, I just uploaded a beta update for Airmail, ver 3.2.011 which updates the PK-family driver to (hopefully) address problems with Pactor connects, and also...
Thanks Jim!! It works perfectly. I appreciate the quick response on the problem. Great work and a great program. 73 Dennis, AG5Y ... updates the PK-family...
All, Airmail beta 3.2.012 is posted at www.airmail2000.com. The change from .011 is a fix for the Kantronics KPC-9612 for access to the second port from...
All, A couple of users have reported problems with telnet access to Winlink from Airmail ver 3.2, DNS timeout errors. It turns out to be a problem with Norton...
Eric, ... The D700/D7 are supported by AGW/PE (SV2AGW's "Packet Engine"), and support for AGW/PE will be added to Airmail-- hopefully in the few weeks. It may...
... Hello Friends, I, too, wanted to echo a hearty "well done" with v3.2! In upgrading from v3.1 to v3.2 (on an older machine) it was necessary to also change...
Any word on having support for the D700s and D7s out there with Airmail? I'm getting ready to do a EM-WL2K proposal tomorrow and it would be great if I could...
Jim, I'm having problems selecting an area that I usually sail. When I am trying to select the area of the Pamlico Sound (NC) it won't let me drag the box out...
What do you want in Airmail for D700 support? Just connect up the radio and go! Steve, k4cjx ... From: Christensen, Eric [mailto:christensene@...] ...
k4cjx
k4cjx@...
Nov 17, 2004 3:19 pm
1019
Unless I'm missing something, Airmail does not currently support the D700/D7 for packet. Jim sent me an email earlier saying that he was going to implement...
Hello Eric, The D700A/7A and other radios with the built in Tasco TNCs have proved very problematic for these applications. It's very limited buffer size is...
It is a 144/440 radio that will work with afsk or fsk, depending on how the baud rate is set. What is there to do? The KANTRONICS 9612+ works with it, so do...
k4cjx
k4cjx@...
Nov 18, 2004 2:52 pm
1023
Yes, ALWAYS use the external modem, regardless of radio. Steve ... From: Scott Thile (K4SET) [mailto:k4set@...] Sent: Wednesday, November 17,...
k4cjx
k4cjx@...
Nov 18, 2004 2:52 pm
1024
Steve, The Kenwood D7 and D700 have a built-in TNC, the question is whether there will be any support for this built-in TNC instead of using an external modem....
Jim, The built in TNCs are NOT meant for data transfer and only work properly when used for simple APRS short bursts. You would be wasting your time attempting...
k4cjx
k4cjx@...
Nov 18, 2004 4:56 pm
1026
All, I will offer that the software author SV2AGW explicitly states on his web page that AGW will NOT work with built in TNCs. Here is the link: ...
Good point! Steve, k4cjx ... From: KB6YNO [mailto:kb6yno@...] Sent: Thursday, November 18, 2004 14:05 To: Telpac-Paclink; wl2kemcomm;...
k4cjx
k4cjx@...
Nov 19, 2004 12:33 am
1028
Steve, I disagree with your statement. The TNCs are not just there for APRS use. I have used mine with Paclink before with success at 1200 and 9600 baud. If...
Hello everyone...just joined the group. Has anyone experienced a problem sending multiple Airmail messages via a VHF Telpac node? I always get the following...
Eric, At 9600 baud, what is your throughput rate? How many messages have you put through it at 9600 baud with any size attachment? How long did it take?...
k4cjx
k4cjx@...
Nov 19, 2004 12:06 pm
1031
This is a different bug than has been reported. I have copied the author on this issue. Perhaps you should contact him next week. He will be home by then. ...
k4cjx
k4cjx@...
Nov 19, 2004 12:44 pm
1032
hello Fred, ... no problem here. This was my test session: TelPac-Node/LinuX Rev0.9b3 (dl5di Oct 29 2004) DB0LJ in Kruft nr Koblenz/Germany, SysOp DL5DI This...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
