This is dangerous, but it will work.

Open "Airmail.INI" in a text editor. (...and be SURE to save it as
plain text when you're done!) (The INI file is in the same folder
where the program itself resides.)

First, before anything else, save it back with a new name. I use
"AirmailBAK.INI" for backup. Only a file named "Airmail.INI"
will correctly launch Airmail...

Scroll down, about 2/3 of the way last time I did this if I recall
right, and you'll find a section that looks like this:


[Packet Client]
DecoderType=PK-232
Port Settings=COM1:9600,N,8,1
Show Link Messages=0
Tx Delay=1000
Persistence=200
Slot Time=300
Max Frames=1
Frack Time=2000
Max Tries=5
Response Delay=1000
Check Time=60000
Radio Baud=1200
Tx Level=500
Packet Length=120
Tx Delay 2=500
Persistence 2=63
Slot Time 2=100
Max Frames 2=1
Frack Time 2=2000
Max Tries 2=5
Response Delay 2=1000
Check Time 2=60000
Radio Baud 2=1200
Tx Level 2=500
Packet Length 2=128
Connect To=KR1COM-10
Connect As=KW1B
Auto Period=60
Auto Time=15
Auto Check=0
Connect To 1=KR1COM
Connect To 2=KX1EOC-10
Connect To 3=KX1EOC-10 V KO1F
Connect To 4=KD1RY-4
Connect To 5=W1HAD-4
Connect To 6=KO1F
Connect To 7=W1QH
Connect To 8=AB1DO
Connect To 9=W1QK
Connect To 10=N1BDF-10 V W1HAD-2
Connect To 11=KD1RY-4 V KO1F
Connect To 12=WA1MOG-10
Connect To 13=N1BDF-10
Connect To 14=W1QH V KO1F
Connect To 15=KR1COM V KO1F
Connect To 16=KX1EOC-4
Connect To 17=KX1EOC-2
Connect To 18=KX1EOC-1
Connect To 19=KX1EOC-15
Connect To 20=KO1F V KR1COM
Connect To 21=KX1EOC-10 V KR1COM
Connect To 22=KB1KHB
Connect To 23=WA1MOG-10 KR1COM
Connect To 24=KX1EOC-10 KR1COM
Connect To 25=KR1COM-10
Connect To 26=KX1EOX-10 KR1COM
Connect To 27=KX1EOX-10 KR1COM-10
[Forwarding List]
PKT,KW1B=KW1B
PKT,KR1COM=KR1COM
PKT,KO1F=KO1F
PKT,W1QI=W1QI
PKT,W1QH=W1QH
more -- more -- more

As you can see, I have a lot of cleaning up to do
myself.

Delete the lines you want. "Close up" the final
list, eliminating any "empty" Connect To XX
statements.

Save the file as text.

THIS IS DANGEROUS!! BE VERY CAREFUL, AND
DON'T CHANGE ANYTHING YOU DON'T KNOW
WHAT IT IS.

- 73 -
KW1B

I assume no responsibility for anything bad that happens
You're on your own, and you've been warned. Be careful.
__________________________________________

----- Original Message -----
From: "Jim Egerton" <jim.egerton@...>
To: <airmail2000@yahoogroups.com>
Sent: Wednesday, July 08, 2009 8:50 PM
Subject: [airmail2000] modules packet client connect to:


> I am new to this group and I hope you can help. Under the modules tab I
click Packet Client and get connect to. I have a lot of old addresses I
would like to get rid of but don't see a list where I can add and delete old
call signs and connection paths. Does someone know how.
>
> Thanks so much
>
> Jim
>
>