Has anyone been able to get the Kenwood D7A (g version) to work with AGWPE or AGWPE Pro in KISS mode? Hasan has asked this before and George suggesting...
I have tried it with the same results on both 1200 and 9600 bps. increasing TXD just sends more flags, but no data. With no hardware flow control on the TH-d7...
OK so many folks arew using this so I decided to come back and give it a try. Still there is the same old problem. Hyperterminal works and AGW pro doesn't. The...
Hello Mike I have here both tnc's mentioned working perfectly with AGW-Pro. First the flashing of the leds is not a problem as none of them will do it. This is...
Good Day Gerry, If you are using a microsoft product for an OS just click on find or search depending on the version of software that is your Windows Operating...
Hi to find a file it must exists. Have you enabled the Log file capture? From Left Menu select "Other.." and enable the LOG. Have in mind that this file may...
Hi PK900 is supported well. Just read its manual to see how it enters KISS mode. It needs some extra commands which you should enter using Hyperterminal. After...
Hi guys. Does anyone know when PE Pro will support the BP-96 (PICPAR) 9600 baud parallel (printer) port modem in Windows XP? I searched the archives for the...
Hi George, Thanks. I was finally able to figure it out. The high order bit has to be set for the correct radio port so for vhf packet it is $11. Dave ... From:...
Hi The wizzard sets correctly the command "KISS 11". What else have you done?? 73 (SV2AGW)George Rossopoulos sv2agw@... www.elcom.gr/sv2agw +306932465216 ...
Hi If you install WINXP SP2 you will notice that the Tcpip over radio adapter does not appear in the Network Connections view and you cannot configure it. The...
Hi George, I set it to kiss $11. Needs to be hex not decimal. 73 Dave ... From: "(SV2AGW)George Rossopoulos" <sv2agw@...> To: <agwpe_pro@yahoogroups.com> ...
I'm running latest version of PE PRo on a 1.7G P4 w/sound card built in.Using direct s/c connect to a VHF FM xceiver to run 1200B Packet. Across the room I...
Bill, So two things were changed out to make it work -- the sound card and the interface. What kind of interface were you using? It might be interesting to see...
Jon, The card is listed as a choice in the PE Pro installation wizard, so I assume it's supported. I'm not familiar with the card, so I don't know for sure. PE...
Ralph Thanks for the reply. I unfortunately installed pe-pro 2 months ago and never got around to looking at it! My PC needs a reformat / reinstall anyway;-) ...
One of the features listed in AGWPE is that you can utilize this program in lieu of an actual TNC. All that is need is the cable interface to the radio from...
John, AGWPE's and AGWPE Pro's sound card modem feature doesn't emulate a particular TNC very closely. The parameters you mention are just about all the...
... and ... disabed ... win98/me ... extra ... d700 ... Hello all from "3.The baycom driver for the moment will work only under win98/me and win2000/xp with no...
I think there may have been a misunderstanding. The Baycom won't work with PE Pro on a WIn XP/2000 system unless you have a *non*-ACPI card. I suspect that...
Hi Probably you installed it before. I will give you a link later today to download a trial version. 73 micro USB TNT (A pocket TNC with Build in Tracker and...
Hi Download www.raag.org/sv2agw/pepro.zip replace the executable in Program files/agwsoft/Packet Engine Pro with the one in the zip 73 micro USB TNT (A pocket...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
