I get the following message when I double click on a call to get the QRZ lookup: "QRZ.com request Can't send request to QRZ.com (40006) Wrong protocol or...
The qrz.com interface is broken. It stopped working for all of the DX clusters late last week. Mike, W1NR ... *** Tabhair gach fear a drucht *** *** Give...
Been working just fine here, just checked it again. I have 'fat' fingers and accidentally get 'look-ups' several times a day. MAL N7MAL BULLHEAD CITY, AZ ...
Also working fine for me 73 de Jim, GI0DVU Lisburn, County Antrim www.qsl.net/giodvu _____ From: XMLog@yahoogroups.com [mailto:XMLog@yahoogroups.com] On Behalf...
Did it work without problems at one point? Perhaps you've made changes in your network setup? I've checked out the code here and I must admit I don't see how...
Am I the only one having this problem? It works just fine about 25% of the time and messes up about 75% of the time. I have 2 computers using XMlog and both...
I have occasionally seen this problem. I think that the QRZ.com web site does not respond and you get a timeout, then you get another request and it works....
I tried 25 seperate calls and they all worked just fine. I've noticed no problems using the QRZ lookup. Dennis N6NG ... site ... and it ... request? ... ...
Hi Puck, Since XMLog isn't meant to be a contesting program I haven't added support for creating Cabrillo format files. Most XMLog users (myself included) use...
I understand. Normally I use SD logger for contests but I dabbled in 4 different contests this past weekend and found it easier to just use XM log with...
OK Puck, Well now that I have optional "Contest In/Out" fields that can be displayed perhaps it's time I reconsidered Cabrillo support. Mike - W1ECT...
Hello all... Here I am with another question. I know how to do a "sh/dx on 20m" for example. and I know how to do a "sh/dx by_zone 3" for example. But how do I...
If you are using an ARC Cluster here is the link to the manual for advanced options. It was written by a computer 'geek' for computer 'geeks'. It takes a...
Hi Dennis, Assuming you are using a DXSpider node both should work. During the recent VU4 activity I was using commands like: sh/dx on 20m by_zone 3,4,5 vu4* ...
Thanks Mike... Niether of those work on W6RFU that says it's running DXSpider V1.51 build 58.317. Don't know if it's an old build or if I have something set ...
OK Dennis, I tried bunch of the DXSpider nodes listed at: www.ng3k.com/Misc/cluster.html and found that most handled the zone+band syntax fine but there was ...
I wanted to re-visit the packet voice announcements. Last week when KH6ND/KH5 was active about every 4th time he was spotted I got a voice announcement. I...
If you upload contest logs from a program such as WriteLog into LoTW and then import them into XMLog you may get duplicate entries in LoTW if you upload the...
There was a lot digest there. First 99% of my contesting is with CT and has been since the mid/late 80's, (it was DOS only in those days). I use N1MM only if I...
Mike, Note as of June 1, 2006, ZK1 stations in the Cook Is. will be changing to the prefix E51. I wanted to be sure that you had this info for your prefix ...
This was posted on one of the DX mailing lists: As of June 1, 2006 ZK1 will change to new call E51 here in the Cook Islands . * *I was just running out of ZK1...
Hi Mal, I'm looking into the matter of alert inhibiting and I'll post something soon. One note thhough, the "every fourth time" syndrome is probably caused by...
It was in the Daily DX: ======================== *** The Daily DX (c) *** ======================== Volume 10 Number 098 May 26, 2006 Editor/Publisher Bernie...
OK - The way I normally handle this is to wait until the ARRL officially updates the "main prefix" in their countries list and then I do the same. At this...
Hi Mike, As the Cook Is. have the series E5A-E5Z, maybe they will be using E51 for S. Cook and another number (E52 ?) for North Cook? Note the range in this...
I am having trouble interfacing XMlog 5.22 with Icom IC-7000. Does anyone know what settings needs to be set to make it work? IC-7000 is not in directly...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
