V4Protocol : Messages : 2777-2806 of 3287

When writing my SSB Audio Handling TechNote recently, I wanted to check
out some of the more well-known digital communications packages to make
sure they worked as expected. I made some brief configuration notes as I
went along, and I have now put these notes into a new HOWTO.

Go to the TS-590S Resources Page:

    http://homepage.ntlworld.com/wadei/ts-590s.htm

Scroll down to the "HOWTOs" section, then click on the link:

"TS-590S HOWTO: Digital QuickStart"

The notes for each package are very brief, but hopefully just enough to
get started.


--
73
Ian, G3NRW

The TS-590S Resources Page:
    http://homepage.ntlworld.com/wadei/ts-590s.htm

#2778

From: Ian Wade G3NRW <g3nrw-radio@...>
Date: Mon May 7, 2012 8:08 am
Subject: TS-590S HOWTO: Remote Operation (with a twist)

g3nrw

I have posted a new TS-590 HOWTO on Remote Operation. Go to the TS-590
Resources Page:

    http://homepage.ntlworld.com/wadei/ts-590s.htm

Scroll down to the end of the "HOWTOs" section, then click on the link:

"*** TS-590S HOWTO: Remote Operation".

The HOWTO has full details on setting up the TS-590S for remote
operation over the internet, using Skype and TeamViewer.

The twist? The HOWTO also describes the capability of the TS-590S to
send monitored sidetone audio along the same path as the RX audio. This
means that from the comfort of your local PC you can listen to the
radio’s TX Monitor, letting you check and adjust the quality of the TX
audio in (more or less) real time -- no more guessing how your signal
might sound thousands of miles away!

--
73
Ian, G3NRW

The TS-590S Resources Page:
    http://homepage.ntlworld.com/wadei/ts-590s.htm

#2779

From: Ian Wade G3NRW <g3nrw-radio@...>
Date: Fri May 25, 2012 4:41 pm
Subject: TS-590S Digital QuickStart -- major update to v1.2

g3nrw

It seems that the original version of the TS-590S Digital QuickStart was
just a little too quick for some people! So I have now considerably
expanded it.

The main changes include:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*  Added explanation of VOX and CAT TX keying

*  Added MixW configuration details

*  Added VOX setup details for several packages

*  Added requirement for Fldigi TS-590S XML file
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Thanks to everyone who contributed useful feedback.

The QuickStart is accessible through the TS-590S Resources Page:

    http://homepage.ntlworld.com/wadei/ts-590s.htm

Scroll down to the "HOWTOs" section, then click on the link:

"TS-590S HOWTO: Digital QuickStart"

--
73
Ian, G3NRW

The TS-590S Resources Page:
    http://homepage.ntlworld.com/wadei/ts-590s.htm

The TS-990S Resources Page:
    http://homepage.ntlworld.com/wadei/ts-990.htm

#2780

From: "Rick Westerfield" <r_lwesterfield@...>
Date: Mon May 28, 2012 7:30 pm
Subject: V4 Chat? Anybody Up?

r_lwesterfie...

Hello,

I’m monitoring 14.086 dial / 14.0875 CF if anybody wants to do a little V4 Chat. It has been a while since hearing it on the bands.

Rick KH2DF

#2781

From: Lee Swanson <nr5g@...>
Date: Mon May 28, 2012 9:12 pm
Subject: RE: V4 Chat? Anybody Up?

nr5g

Hey Rick you still on 14086 dial in v4 mode... I normally will call cq in v4 mode on 14073 usb dial freq..seems to be a decent hangout for v4 and other stuff like ale400 and ale141a...

To: V4Protocol@yahoogroups.com
From: r_lwesterfield@...
Date: Mon, 28 May 2012 14:30:14 -0500
Subject: [V4Protocol] V4 Chat? Anybody Up?

Hello,

I�m monitoring 14.086 dial / 14.0875 CF if anybody wants to do a little V4 Chat. It has been a while since hearing it on the bands.

Rick KH2DF

#2782

From: "Kirk, K6KAR" <kirk.harding@...>
Date: Mon May 28, 2012 9:53 pm
Subject: RE: V4 Chat? Anybody Up?

kirkharding...

I was on there earlier and called CQ a couple of times but no action!

Kirk, K6KAR

From: V4Protocol@yahoogroups.com [mailto:V4Protocol@yahoogroups.com] On Behalf Of Lee Swanson
Sent: Monday, May 28, 2012 4:12 PM
To: v4protocol@yahoogroups.com
Subject: RE: [V4Protocol] V4 Chat? Anybody Up?

Hey Rick you still on 14086 dial in v4 mode... I normally will call cq in v4 mode on 14073 usb dial freq..seems to be a decent hangout for v4 and other stuff like ale400 and ale141a...

To: V4Protocol@yahoogroups.com
From: r_lwesterfield@...
Date: Mon, 28 May 2012 14:30:14 -0500
Subject: [V4Protocol] V4 Chat? Anybody Up?

Hello,

I’m monitoring 14.086 dial / 14.0875 CF if anybody wants to do a little V4 Chat. It has been a while since hearing it on the bands.

Rick KH2DF

#2783

From: Lee Swanson <nr5g@...>
Date: Mon May 28, 2012 10:00 pm
Subject: RE: V4 Chat? Anybody Up?

nr5g

I am listening on 14073 dial

To: V4Protocol@yahoogroups.com
From: kirk.harding@...
Date: Mon, 28 May 2012 16:53:55 -0500
Subject: RE: [V4Protocol] V4 Chat? Anybody Up?

I was on there earlier and called CQ a couple of times but no action!

Kirk, K6KAR

Hey Rick you still on 14086 dial in v4 mode... I normally will call cq in v4 mode on 14073 usb dial freq..seems to be a decent hangout for v4 and other stuff like ale400 and ale141a...

To: V4Protocol@yahoogroups.com
From: r_lwesterfield@...
Date: Mon, 28 May 2012 14:30:14 -0500
Subject: [V4Protocol] V4 Chat? Anybody Up?

Hello,

I�m monitoring 14.086 dial / 14.0875 CF if anybody wants to do a little V4 Chat. It has been a while since hearing it on the bands.

Rick KH2DF

#2784

From: "Rick Westerfield" <r_lwesterfield@...>
Date: Mon May 28, 2012 10:56 pm
Subject: RE: V4 Chat? Anybody Up?

r_lwesterfie...

I hung out there a while but can go back to 14073 if anybody is still interested. It seemed like a busy freq earlier in the day.

Rick KH2DF

From: V4Protocol@yahoogroups.com [mailto:V4Protocol@yahoogroups.com] On Behalf Of Lee Swanson
Sent: Monday, May 28, 2012 5:01 PM
To: v4protocol@yahoogroups.com
Subject: RE: [V4Protocol] V4 Chat? Anybody Up?

I am listening on 14073 dial

To: V4Protocol@yahoogroups.com
From: kirk.harding@...
Date: Mon, 28 May 2012 16:53:55 -0500
Subject: RE: [V4Protocol] V4 Chat? Anybody Up?

I was on there earlier and called CQ a couple of times but no action!

Kirk, K6KAR

Hey Rick you still on 14086 dial in v4 mode... I normally will call cq in v4 mode on 14073 usb dial freq..seems to be a decent hangout for v4 and other stuff like ale400 and ale141a...

To: V4Protocol@yahoogroups.com
From: r_lwesterfield@...
Date: Mon, 28 May 2012 14:30:14 -0500
Subject: [V4Protocol] V4 Chat? Anybody Up?

Hello,

I’m monitoring 14.086 dial / 14.0875 CF if anybody wants to do a little V4 Chat. It has been a while since hearing it on the bands.

Rick KH2DF

#2785

From: "ham" <ve3fwf@...>
Date: Wed May 30, 2012 8:54 pm
Subject: Re: V4 Chat? Anybody Up?

ve3fwf

Interest in V4 seems to have waned.  There was a lot of activity last summer but
now, every time I listen on 14073, there are no V4 QSOs.

Consider using K3UK's SKED page if you are listening on 14073.

73, Bernie





--- In V4Protocol@yahoogroups.com, "Rick Westerfield" <r_lwesterfield@...>
wrote:
>
> I hung out there a while but can go back to 14073 if anybody is still
> interested.  It seemed like a busy freq earlier in the day.
>
>
>
> Rick KH2DF
>
>
>
> From: V4Protocol@yahoogroups.com [mailto:V4Protocol@yahoogroups.com] On
> Behalf Of Lee Swanson
> Sent: Monday, May 28, 2012 5:01 PM
> To: v4protocol@yahoogroups.com
> Subject: RE: [V4Protocol] V4 Chat? Anybody Up?
>
>
>
>
>
>
> I  am listening on 14073 dial
>
>   _____
>
> To: V4Protocol@yahoogroups.com
> From: kirk.harding@...
> Date: Mon, 28 May 2012 16:53:55 -0500
> Subject: RE: [V4Protocol] V4 Chat? Anybody Up?
>
>
>
>
>
> I was on there earlier and called CQ a couple of times but no action!
>
>
>
> Kirk, K6KAR
>
>
>
> From: V4Protocol@yahoogroups.com [mailto:V4Protocol@yahoogroups.com] On
> Behalf Of Lee Swanson
> Sent: Monday, May 28, 2012 4:12 PM
> To: v4protocol@yahoogroups.com
> Subject: RE: [V4Protocol] V4 Chat? Anybody Up?
>
>
>
>
>
>
> Hey Rick you still on 14086 dial in v4 mode... I normally will call cq in v4
> mode on 14073 usb dial freq..seems to be a decent hangout for v4 and other
> stuff like ale400 and ale141a...
>
>
>
>   _____
>
> To: V4Protocol@yahoogroups.com
> From: r_lwesterfield@...
> Date: Mon, 28 May 2012 14:30:14 -0500
> Subject: [V4Protocol] V4 Chat? Anybody Up?
>
>
>
>
>
> Hello,
>
>
>
>   I'm monitoring 14.086 dial / 14.0875 CF if anybody wants to do a little V4
> Chat.  It has been a while since hearing it on the bands.
>
>
>
> Rick KH2DF
>

#2786

From: "Costas J. Dovas - SV4FFL" <sv4ffl@...>
Date: Wed May 30, 2012 9:08 pm
Subject: Re: Re: V4 Chat? Anybody Up?

costas_am

I also want to try V4CHAT mode.

What is the freq used on 30M if any?

Costas J. Dovas
SV4FFL
Loc: KM19li
e-mail: sv4ffl@...
Radio e-mail : sv4ffl@...
web: http://www.qsl.net/sv4ffl

----- Original Message -----

From: ham

To: V4Protocol@yahoogroups.com

Sent: Wednesday, May 30, 2012 11:54 PM

Subject: [V4Protocol] Re: V4 Chat? Anybody Up?

Interest in V4 seems to have waned. There was a lot of activity last summer but now, every time I listen on 14073, there are no V4 QSOs.

Consider using K3UK's SKED page if you are listening on 14073.

73, Bernie

--- In V4Protocol@yahoogroups.com, "Rick Westerfield" <r_lwesterfield@...> wrote:
>
> I hung out there a while but can go back to 14073 if anybody is still
> interested. It seemed like a busy freq earlier in the day.
>
>
>
> Rick KH2DF
>
>
>
> From: V4Protocol@yahoogroups.com [mailto:V4Protocol@yahoogroups.com] On
> Behalf Of Lee Swanson
> Sent: Monday, May 28, 2012 5:01 PM
> To: v4protocol@yahoogroups.com
> Subject: RE: [V4Protocol] V4 Chat? Anybody Up?
>
>
>
>
>
>
> I am listening on 14073 dial
>
> _____
>
> To: V4Protocol@yahoogroups.com
> From: kirk.harding@...
> Date: Mon, 28 May 2012 16:53:55 -0500
> Subject: RE: [V4Protocol] V4 Chat? Anybody Up?
>
>
>
>
>
> I was on there earlier and called CQ a couple of times but no action!
>
>
>
> Kirk, K6KAR
>
>
>
> From: V4Protocol@yahoogroups.com [mailto:V4Protocol@yahoogroups.com] On
> Behalf Of Lee Swanson
> Sent: Monday, May 28, 2012 4:12 PM
> To: v4protocol@yahoogroups.com
> Subject: RE: [V4Protocol] V4 Chat? Anybody Up?
>
>
>
>
>
>
> Hey Rick you still on 14086 dial in v4 mode... I normally will call cq in v4
> mode on 14073 usb dial freq..seems to be a decent hangout for v4 and other
> stuff like ale400 and ale141a...
>
>
>
> _____
>
> To: V4Protocol@yahoogroups.com
> From: r_lwesterfield@...
> Date: Mon, 28 May 2012 14:30:14 -0500
> Subject: [V4Protocol] V4 Chat? Anybody Up?
>
>
>
>
>
> Hello,
>
>
>
> I'm monitoring 14.086 dial / 14.0875 CF if anybody wants to do a little V4
> Chat. It has been a while since hearing it on the bands.
>
>
>
> Rick KH2DF
>

#2787

From: Ian Wade G3NRW <g3nrw-radio@...>
Date: Thu May 31, 2012 8:29 am
Subject: Re: Re: V4 Chat? Anybody Up?

g3nrw

___Original Message_________________________________________
From: Costas J. Dovas - SV4FFL <sv4ffl@...>
Date: Thu, 31 May 2012   Time: 00:08:26

>I also want to try V4CHAT mode.
>What is the freq used on 30M if any?
>73
>�
>Costas J. Dovas
>SV4FFL

Costas

All the details for 30m are here:

    http://homepage.ntlworld.com/wadei/30m_band_utilization.htm

--
73
Ian, G3NRW

The 30m Band Utilization Chart:
    http://homepage.ntlworld.com/wadei/30m_band_utilization.htm

The 160m Band Utilization Chart:
    http://homepage.ntlworld.com/wadei/160m_band_utilization.htm

The Top Band Digital Group (TBD160):
    http://groups.yahoo.com/group/TBD160

#2788

From: Ian Downie <idownie@...>
Date: Thu Jun 7, 2012 2:52 am
Subject: un-subscribe

idownie...

#2789

From: Ian Wade G3NRW <g3nrw-radio@...>
Date: Tue Jun 12, 2012 5:04 am
Subject: 30m Band Utilization Chart updated: 12 June 2012

g3nrw

I have just added the WB3ANQ QRSS "snake" to the 30m Band Utilization
Chart:

    http://homepage.ntlworld.com/wadei/30m_band_utilization.htm


--
73
Ian, G3NRW

The 30m Band Utilization Chart:
    http://homepage.ntlworld.com/wadei/30m_band_utilization.htm

The 160m Band Utilization Chart:
    http://homepage.ntlworld.com/wadei/160m_band_utilization.htm

#2790

From: V4Protocol@yahoogroups.com
Date: Sat Jun 16, 2012 4:15 pm
Subject: New file uploaded to V4Protocol

V4Protocol@yahoogroups.com

Hello,

This email message is a notification to let you know that
a file has been uploaded to the Files area of the V4Protocol
group.

   File        : /V4Chat 1.0.2.0 Full install.zip
   Uploaded by : kn6kb <rmuething@...>
   Description : V4 Chat 1.0.2.0 full install with V4 TNC, Help and revision
history

You can access this file at the URL:
http://groups.yahoo.com/group/V4Protocol/files/V4Chat%201.0.2.0%20Full%20install\
.zip

To learn more about file sharing for your group, please visit:
http://help.yahoo.com/l/us/yahoo/groups/original/members/web/index.html
Regards,

kn6kb <rmuething@...>

Reply | Messages in this Topic (141)

#2791

From: "kn6kb" <rmuething@...>
Date: Sat Jun 16, 2012 4:24 pm
Subject: V4 Chat and V4 TNC update to 1.0.2.0

kn6kb

All,

I have been working on some enhancements for improved senitivity and robustness
using some new DSP code (Square Wave correlation).

This new version also includes support for the newer radios with built in sound
cards/interfaces like the TS-590S or the IC-7200 or IC-7600.

I have posted the full install on the V4 group web site along with an auto
update from version 1.0.1.0.  Your settings should not be lost with a new
install.

I will be avaialble this week for testing on 40 meters, 30 meters, 20 meters,
and 17 meters.

Rick KN6KB

#2792

From: "Fred - w1wyc" <f_garside@...>
Date: Sat Jun 16, 2012 5:02 pm
Subject: Re: V4 Chat and V4 TNC update to 1.0.2.0

w1wyc

Hi Rick,

Auto update worked fine.

73,

Fred, W1WYC

----- Original Message -----

From: kn6kb

To: V4Protocol@yahoogroups.com

Sent: Saturday, June 16, 2012 12:24 PM

Subject: [V4Protocol] V4 Chat and V4 TNC update to 1.0.2.0

All,

I have been working on some enhancements for improved senitivity and robustness using some new DSP code (Square Wave correlation).

This new version also includes support for the newer radios with built in sound cards/interfaces like the TS-590S or the IC-7200 or IC-7600.

I have posted the full install on the V4 group web site along with an auto update from version 1.0.1.0. Your settings should not be lost with a new install.

I will be avaialble this week for testing on 40 meters, 30 meters, 20 meters, and 17 meters.

Rick KN6KB

#2793

From: "Eugene Morgan" <G4AIU@...>
Date: Sat Jun 16, 2012 8:14 pm
Subject: RE: V4 Chat and V4 TNC update to 1.0.2.0

ea.morgan...

The Auto-update facility worked fine on both my XP and Win 7 computers.

73 de Eugene / G4AIU

From: V4Protocol@yahoogroups.com [mailto:V4Protocol@yahoogroups.com] On Behalf Of Fred - w1wyc
Sent: 16 June 2012 18:02
To: V4Protocol@yahoogroups.com
Subject: Re: [V4Protocol] V4 Chat and V4 TNC update to 1.0.2.0

Hi Rick,

Auto update worked fine.

73,

Fred, W1WYC

----- Original Message -----
From: kn6kb
To: V4Protocol@yahoogroups.com
Sent: Saturday, June 16, 2012 12:24 PM
Subject: [V4Protocol] V4 Chat and V4 TNC update to 1.0.2.0

All,

I have been working on some enhancements for improved senitivity and robustness using some new DSP code (Square Wave correlation).

This new version also includes support for the newer radios with built in sound cards/interfaces like the TS-590S or the IC-7200 or IC-7600.

I have posted the full install on the V4 group web site along with an auto update from version 1.0.1.0. Your settings should not be lost with a new install.

I will be avaialble this week for testing on 40 meters, 30 meters, 20 meters, and 17 meters.

Rick KN6KB

#2794

From: "kirkharding@..." <kirk.harding@...>
Date: Sat Jun 16, 2012 8:41 pm
Subject: Auto update

kirkharding...

The auto update worked great.  Still getting a message that says registration
will be emailed.

Kirk, K6KAR

#2795

From: "la7um" <la7um@...>
Date: Sun Jun 17, 2012 1:20 am
Subject: Re: V4 Chat and V4 TNC update to 1.0.2.0

la7um

Autoupdate worked exellent for my XP Home Acer One as well. 73. Finn/LA7UM

--- In V4Protocol@yahoogroups.com, "Eugene Morgan" <G4AIU@...> wrote:
>
> The Auto-update facility worked fine on both my XP and Win 7 computers.
>
>
>
> 73 de Eugene / G4AIU
>
>
>
> From: V4Protocol@yahoogroups.com [mailto:V4Protocol@yahoogroups.com] On
> Behalf Of Fred - w1wyc
> Sent: 16 June 2012 18:02
> To: V4Protocol@yahoogroups.com
> Subject: Re: [V4Protocol] V4 Chat and V4 TNC update to 1.0.2.0
>
>
>
>
>
> Hi Rick,
>
>
>
> Auto update worked fine.
>
>
>
> 73,
>
> Fred, W1WYC
>
>
>
> ----- Original Message -----
>
> From: kn6kb <mailto:rmuething@...>
>
> To: V4Protocol@yahoogroups.com
>
> Sent: Saturday, June 16, 2012 12:24 PM
>
> Subject: [V4Protocol] V4 Chat and V4 TNC update to 1.0.2.0
>
>
>
>
>
> All,
>
> I have been working on some enhancements for improved senitivity and
> robustness using some new DSP code (Square Wave correlation).
>
> This new version also includes support for the newer radios with built in
> sound cards/interfaces like the TS-590S or the IC-7200 or IC-7600.
>
> I have posted the full install on the V4 group web site along with an auto
> update from version 1.0.1.0. Your settings should not be lost with a new
> install.
>
> I will be avaialble this week for testing on 40 meters, 30 meters, 20
> meters, and 17 meters.
>
> Rick KN6KB
>

#2796

From: "Peter Z." <oe6zh@...>
Date: Sun Jun 17, 2012 8:21 am
Subject: Re: V4 Chat and V4 TNC update to 1.0.2.0

oe6zh

Tnx, Rick, autoupdate done. 73, Peter Z.

--- In V4Protocol@yahoogroups.com, "kn6kb" <rmuething@...> wrote:
>
> All,
>
> I have been working on some enhancements for improved senitivity and
robustness using some new DSP code (Square Wave correlation).
>
> This new version also includes support for the newer radios with built in
sound cards/interfaces like the TS-590S or the IC-7200 or IC-7600.
>
> I have posted the full install on the V4 group web site along with an auto
update from version 1.0.1.0.  Your settings should not be lost with a new
install.
>
> I will be avaialble this week for testing on 40 meters, 30 meters, 20 meters,
and 17 meters.
>
> Rick KN6KB
>

#2797

From: "Rick Muething" <rmuething@...>
Date: Sun Jun 17, 2012 11:22 am
Subject: V4 Chat 1.0.2.0

kn6kb

All,

For convenience of non V4Protocol Yahoo members I have also posted the V4 Chat 1.0.2.0 full install on the Winlink FTP site ftp://autoupdate.winlink.org/User%20Programs/

If you have friends that wish to try out the code they can download from this FTP site.

73,

Rick KN6KB

#2798

From: Ron Wenig <rwenig@...>
Date: Sun Jun 17, 2012 11:59 am
Subject: TS-590 USB Data Mode

ronwenig

Hi Rick,

I have a Kenwood TS-590 radio and I am using V4 Chat version 1.0.2.0.
In the radio setup I have USB Data selected.  When the program switches
frequency it will also switch the radio's mode to FSK instead of USB
Data.  When I select USB the radio will switch to USB then I have to
manually select Data mode on the radio.  Is this because the program is
sending the wrong command to the radio.

73, Ron ny3j

#2799

From: Leo yudysky <lyudysky@...>
Date: Sun Jun 17, 2012 2:32 pm
Subject: Re: V4 Chat Request to post frequencies?

lyudysky

Hello V4 Group,

I was wondering if someone might post a fresh list of frequencies to try v4?

I have only made one contact on 14.073.

Really a nice program, great possibilites for ARES vital communications.

Thank you,

Leo Yudysky

KF7ONI

lyudysky@...

#2800

From: "POB" <obie47165@...>
Date: Sun Jun 17, 2012 3:39 pm
Subject: qso's

obie47165

It is working great from this end<INDIANA>  although 14.073 seems to be the
testing frequency for all digital modes and the North American tuner club
frequency.  I have been on 14.072.5 a few times and have made contacts there
also.
Great job RICK...see the V4 ops on 20 or band chosen..
73
POB/K8LEN

#2801

From: "Rick Muething" <rmuething@...>
Date: Sun Jun 17, 2012 5:45 pm
Subject: Re: TS-590 USB Data Mode

kn6kb

Ron,

I probably missed something. I used code from another application for the TS-590S. It should be USB digital and it also has to switch the internal mux from Aux to USB sound card input to the radio. I’ll check it out ...may be a day or two. I have a TS-590 here just not currently setup.

Rick KN6KB

From: Ron Wenig

Sent: Sunday, June 17, 2012 7:59 AM

To: V4Protocol@yahoogroups.com

Subject: [V4Protocol] TS-590 USB Data Mode

Hi Rick,

I have a Kenwood TS-590 radio and I am using V4 Chat version 1.0.2.0.
In the radio setup I have USB Data selected. When the program switches
frequency it will also switch the radio's mode to FSK instead of USB
Data. When I select USB the radio will switch to USB then I have to
manually select Data mode on the radio. Is this because the program is
sending the wrong command to the radio.

73, Ron ny3j

#2802

From: Ron Wenig <rwenig@...>
Date: Mon Jun 18, 2012 3:42 am
Subject: Re: TS-590 USB Data Mode

ronwenig

Thanks Rick,

The new version works great with the TS-590. I am now using a serial cable for rig control and PTT control and the USB port only for sound. I am getting TR Latency about 40 to 70 ms and the CW ID keying mode sounds much better than the modulated mode.

Ron ny3j

On 6/17/2012 1:45 PM, Rick Muething wrote:

Ron,

I probably missed something. I used code from another application for the TS-590S. It should be USB digital and it also has to switch the internal mux from Aux to USB sound card input to the radio. I’ll check it out ...may be a day or two. I have a TS-590 here just not currently setup.

Rick KN6KB

From: Ron Wenig

Sent: Sunday, June 17, 2012 7:59 AM

To: V4Protocol@yahoogroups.com

Subject: [V4Protocol] TS-590 USB Data Mode

#2803

From: "Rick Muething" <rmuething@...>
Date: Mon Jun 18, 2012 1:22 am
Subject: Re: TS-590 USB Data Mode

kn6kb

Ron,

I found several problems in the code for the TS-590S (a result of not checking the patched in code from another project!) There were also several errors in the Help for the setup. I have it running fine now here on my TS-590S. There is no need for a serial cable for PTT control ...the new code will correctly control the PTT though the normal USB port and set the internal mux of the TS-590S to select the USB sound card output as well as put the radio into the correct mode of USB Data. I will get an update out for this tomorrow along with the updated help.

Rick

From: Ron Wenig

Sent: Sunday, June 17, 2012 11:42 PM

To: V4Protocol@yahoogroups.com

Subject: Re: [V4Protocol] TS-590 USB Data Mode

On 6/17/2012 1:45 PM, Rick Muething wrote:

Ron,

I probably missed something. I used code from another application for the TS-590S. It should be USB digital and it also has to switch the internal mux from Aux to USB sound card input to the radio. I’ll check it out ...may be a day or two. I have a TS-590 here just not currently setup.

Rick KN6KB

From: Ron Wenig

Sent: Sunday, June 17, 2012 7:59 AM

To: V4Protocol@yahoogroups.com

Subject: [V4Protocol] TS-590 USB Data Mode

#2804

From: V4Protocol@yahoogroups.com
Date: Mon Jun 18, 2012 12:07 pm
Subject: New file uploaded to V4Protocol

V4Protocol@yahoogroups.com

Hello,

This email message is a notification to let you know that
a file has been uploaded to the Files area of the V4Protocol
group.

   File        : /V4 Chat 1.0.3.0 Full Install.zip
   Uploaded by : kn6kb <rmuething@...>
   Description : V4 Chat 1.0.3.0 Full Install with V4 TNC and Help

You can access this file at the URL:
http://groups.yahoo.com/group/V4Protocol/files/V4%20Chat%201.0.3.0%20Full%20Inst\
all.zip

To learn more about file sharing for your group, please visit:
http://help.yahoo.com/l/us/yahoo/groups/original/members/web/index.html
Regards,

kn6kb <rmuething@...>

Reply | Messages in this Topic (141)

#2805

From: "Rick Muething" <rmuething@...>
Date: Mon Jun 18, 2012 12:16 pm
Subject: V4 Chat 1.0.3.0 Update

kn6kb

Thanks to all those that reported the problems with the 1.0.2.0 update (Radio driver for the TS-590S and help). I have fixed these and verified operation here on a test TS-590S. The Help is also updated to support the IC-7200, IC-7600 and TS-590S. The latest V4 TNC version is still 1.0.2.0.

The full install has been uploaded to the Yahoo V4Protocol server files session and the Winlink user programs download FTP ftp://autoupdate.winlink.org/User%20Programs/ (refresh your browser window if you don’t see the V4 Chat 1.0.3.0 full install)

73,

Rick Muething, KN6KB

Reply | Messages in this Topic (2)

#2806

From: MICHEL LUZERNE <micheluze@...>
Date: Mon Jun 18, 2012 5:41 pm
Subject: CQ 14.073

f1abl