John I have my insurance with Falcon and it is $600/ yr. I did not get my insurance until after it was flying. Maybe that is the difference. Malcolm ... From:...
9903
William Bernard
billbernard@...
Apr 1, 2005 12:29 pm
John: I got my Insurance through AIG. I only carry liability coverage so the premium was reasonable. The Tricycle/taildragger thing is tough. The company...
Guys, Should I maybe thin the epoxy first before I coat everything? Check out the four pictures I put in a folder called "Marks W-10" under the photos section....
John: I'll be happy to give you the dual insurance or no, if it don't bother you it don't bother me. Rick (CFI) N241SW ... From: John Downing To: Tailwind ...
Mark, That's the way it should look. when putting the gussets on the other side, make sure you also coat the capstrips and diagonals under the gussets. It is...
Here is a link to a free site. http://www.nasg.com/afdb/index-e.phtml Enjoy, Patrick Flynn ... Hi Rich, Try www.pdas.com Lots and lots of airfoil ordinates....
Rick, You uplifted my spirits this morning! What a generous, giving thing to offer. I feel your offer is what EAA and fellow homebuilders are all about! I...
John: I used SkySmith as a broker http://www.skysmith.com/, and they have also arranged my insurance through AIG again this year. Last year I didn't catch it...
... dihedral had some effect on how it handled. You could fly it with touching the controls. You could just move your head forward or back or to the side and...
Thanks for all the input on the insurance. Next week I'll start calling and see what I come up with. I put AVEMCO back on the Colt today for $156.00 a ...
9913
William Bernard
billbernard@...
Apr 2, 2005 12:32 pm
Guido et al: here are a few shots of my firewall showing the holes. Bill ... From: "Guido von Allmen" <lapulce@...> To: <TailwindForum@yahoogroups.com>...
Saturday night was spent getting things ready to weld the wing fittings on. Plans are to finish up the strut fittings as well this next week. Dave Conrad...
Dave, things are really taking shape and looking good. You're a little ahead of me on construction. I have to look for another source on a 9' stick of 3/4 x...
Mike, In my case, the upper and lower cross tube was in the way. Jim ... From: "Mike" <setowings@...> To: <TailwindForum@yahoogroups.com> Sent: Sunday,...
9920
Brian Alley
n320wt@...
Apr 4, 2005 2:32 am
Guido, The best Gascolators and fuel selector valves on the market ar made by Andair, they are being used on certified aircraft made by Lancair and Cirrus. ...
9921
William Bernard
billbernard@...
Apr 4, 2005 12:29 pm
Mike, In my case, the Gascolator is supported at both ends. The firewall side uses a steel fitting I got from Wag Aero. It has 1/4" Pipe thread on one side and...
Hi group, I have a question and need some help here please. There is a guy on another group who is saying that gluing wet wood works perfectly. For example, he...
Thanks Cy. Help me figure something out please. I think of wood fibers like I think of fiberglass fibers. When I get ready to apply epoxy resin to fiberglass...
I guess the ultimate question is. Is a dry piece of wood saturated with epoxy glue, glued to another piece of wood saturated with epoxy glue stronger than a...
Hi Dave! looking good we were in Wausau on Sat. flew up for a short vist with sister . with the warmer weather you will be going right to it now . looks...
Hi Alex ! looks nice you have made good progress this winter . no plans for sun /fun to busy around here . see you this SUMMER i am getting the bmw out of...
gorilla glue says you can do it but I don't think I wood want it on a wing-- Gordon <image.tiff> Yahoo! Groups Links • To visit your group on the web, go...
Thanks Bob, good to here from you. Don't think I'm going to make Sun-n-Fun either, too much to do around here plus the price of gas has gone nuts, $2.50 to...
