-OK, I made my cable and My problem now, is that my TMd700 doesn't seems to see my GPS. Do you think that the GPS-18 need to be set with a software or is it...
Did you supply +5V to the GPS 18 via the red wire. If not you need to do that also. Todd wd6dfh ... From: Martin To: TMD700A@yahoogroups.com Sent: Thursday,...
Martin, This pinout is incorrect. The PC version of the GPS-18 should be wired to the D700 like this: 2-RxD = White (end) 3-TxD = Red (middle) 5-Ret = Shield...
Here is what I copied from the GPS18 Technical Specification Manual from Page 8. I couldn't include a jpg with this email, so I stuck it on the web at:...
Does anyone have a list of all the commands the D700 can receive? Not just the regular TNC commands but all the commands such as dim the display, change freq,...
Play with it. Run hyperterminal and do all the functions via the control head and see what gets displayed in the hyperterminal window. That's how I found...
What are your hyperterminal settings? 9600 8-N-1? I don't seem to be able to communicate with the TNC under these settings. I am able to use the cloning...
Its whatever you have the D700 set for. I believe you can change it via the control head menus. Never had a problem communicating with mine. Make sure...
... Keith, Here's a start : http://jgav.com/ham/tmd700a.htm John - K9IJ - No trees were killed in the sending of this message. However, a large number of...
i have a full control program my freind has to use Skype to remote access the D700 will get tomorrow from work..Don W6Gps CKA <k.ainsley@...> wrote: Does...
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the TMD700A group. File :...
TMD700A@yahoogroups.com
May 7, 2007 4:58 pm
9464
Any motorcycle riders here? Looking to connect the D700 to an Autocom communication unit. I have the interface cord to hook a handheld to the unit. I was...
Should work fine if you get the pinouts correct. I've used a Pro 7 with a TH-D7A(G) & TH-F6A and the Autocom cable for the Kenwood FRS radios. I have their...
Hi Group, I want to use my D-700, GPS, and a laptop running UI-View and can not remember or find how to set this up again. I getting a little batty here and...
yes I have a beta copy will have it running in the kenwood booth at Dayton tailfeathers@... wrote: And?...did ya get it?...Is it available? Gary On Sun,...
Gary We are getting ready for Dayton...he has a few tweeks to go could you email a reminder after Dayton and we should have something for you...Don ...
It's been proposed and there is an active node here in the Puget Sound area. 440.875 9600 baud http://www.nwaprs.info/9600bauduhfaprs.htm ... 450mhz National...
They have some on ebay for about $10 with shipping. they work really well. Better than my $30 Belkin (which tends to bluescreen several systems). ... From:...
I'm using the RS adapter under Vista (bought it to replace a multi-port adaptor that _wouldn't_ run under Vista). Run the driver installer in XP compatibility...
Dennis Brothers
brothers@...
May 11, 2007 6:05 pm
9476
Primarily because then we'd have two separate systems that couldn't talk to each other. There's nothing that says you can't set up a local system on a digital...
Wouldn't it reduce congestion seen in some areas if they moved APRS to 440 and were able to boost the speed up to 9600? Would make for shorter packet x-mit...
There's still a lot of work to be done with getting rid of relays, using the New n-N paradigm, etc. 2m is the most accessible band - many new hams pick up a 2m...
Actually we gateway vhf to uhf and at 9600 there currently is no congestion. Its very fast. And I'm thinking that's his point about why isn't there a set...
I suppose it could be cost of equipment or propagation issues. VHF bends a whole not nicer than UHF. A UHF node would be great for metro areas and then back...
bandwidth to connect the 2 is trivial as they can be connected at the same site via wire. ... rid of relays, using the New n-N paradigm, etc. 2m is the most...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
