I couldn't disagree more with this advice. The Alinco with built in TNC will not run in KISS mode reliably, so for ui-view32 it is NOT a good choice. (I have...
hasan schiers
schiers@...
Jul 1, 2005 11:35 am
6390
Thanks for all the support with my 'set-up problem. I have done what suggested i.e, ensure that I have 'aprs-pkt' and made sure the rest of the radio is set up...
check your cable ,make sure you are NOT using a NULL MODEM cable ... From: rangoonron To: TMD700A@yahoogroups.com Sent: Friday, July 01, 2005 06:26 Subject:...
I am having fairly good success in programming the radio to do several functions. At the moment, it listens for iss and when it hears the iss beacon, it ...
I have a sinking feeling that the answer is no but I am going to ask anyways. I take it APRS will not function under cross band repeat mode? If so I am going...
If you mean Crossband WHILE also performing APRS duties, then no. (Unless you happen to be cross banding to/from 144.39, not a good idea :-) ) It works fairly...
Many thanks to all who replied to my question. I bought the Ethernet coupler and cable and all is working fine. Thanks again Ken ... have the ... get you a ......
I use Brasso metal polishing compound with good success. Be sure to use a very soft, dampened, dust free cloth.. http://www.stanleylondon.com/brasso.htm 73 de...
Thanks for the info! ... <mailto:TMD700A-unsubscribe@yahoogroups.com?subject=Unsubscribe> ... http://us.click.yahoo.com/xmKGzA/IARHAA/kkyPAA/CPMolB/TM ... ...
I have used Brasso on cellphone displays, scanner displays, ham radio displays and watch crystals all with varying degrees of success and never any damage....
... Try toothpaste, it is a litle more gentle than Brasso. 73 Derek M1ARF ___________________________________________________________ Yahoo! Messenger - NEW...
Thanks! ... ΜΟΛΩΝ ΛΑΒΕ ... "The moment the idea is admitted into society that property is not as sacred as the...
Thanks! ... ΜΟΛΩΝ ΛΑΒΕ ... "The moment the idea is admitted into society that property is not as sacred as the...
Jim: I use it in the display with success...I would not use it in the rest of the panel because it would make it shinny.- Mine looks line new afterwards....
hi guys,, A new tm-d700a and am trying to program local repeaters into memory.. I get a few programmed into the(A) 2mtr side and when I try the(B) 440...
Hello All Have a 700A, less than year old. Unit has worked perfectly up until today. All of a sudden, it will not beacon. Unit is in Auto tx mode, squelch...
... Maybe the problem isn't with the radio. Have you verified that you have a blinking GPS on the display. It will not beacon if it's not getting data from the...
Are you sure it is not beaconing? Or are you just not getting the MYPOS reports back? Your area may have just changed to the WIDE2-2 standard in the path. ...
It's supposed to work this way. The channels are a common pool; they are not separated by side A or B. Program the channels however you want; if a side can...
so program all the 2mtr repeaters in and then the 440 all on the a side?? Maybe I better go back and start reading slowly this time..How did you all program...
Phil, use the computer to program the radio. Set up both the A and B sides on the computer and download them into the radio all at the same time. Dave, KBØOCI...
I plugged them all in using the Kenwood PC programming utility. When you use it, you see just a single list of memory slots, numbered from 1-200. Fill it up...
Tnx Phil, will go to kenwood site and find it...But I may be back with more questions... just a warning.....I was under the assumption each band independent of...
... Just as a further clarification since it wasn't mentioned, ALL of the bands that the radio can cover, including all the receive only frequencies in...
... Nope, I like the idea that there are two radios, but only one computer, holding the memory locations. I also like to remind people that they are really two...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
