... the CB? I gather you're saying a fuse might blow on the internal board in the main unit if the control head is not present when the unit powers up? Hmmm,...
that actually worked... tho, radio won't auto-restart after a power cycle. would require having serial device push "PS 1" command on the comm port then could...
No there is a rumor that unplugging and plugging the head in while it has power applied to the radio can blow the internal fuse. From: TMD700A@yahoogroups.com...
Couldn't find any relevant info while doing a cursory search through the archives. It's been a while since I've used the MCP to read and write data from and to...
I first accidently disconnected the control head while the radio was on. The radio powers-down after a few seconds. You hear it clunk in the speaker. I found...
If you power down (with power button) while scanning it will power up scanning. No need to disconnect the head. ... From: Steve <noskosteve@...> Subject:...
Hi All, I am in need of some help? I have a repeater controller that has the ability to send out serial (RS-232) coding. I used to have a Doug Hall RBI-1...
http://www.qsl.net/k7jar/pages/D700Cmds.html Google is your friend. From: TMD700A@yahoogroups.com [mailto:TMD700A@yahoogroups.com] On Behalf Of Gmail - Kevin,...
Kevin, I believe Jim Gill is the originator of this information. Several versions have propagated on the net and I have found a few differences. I also did...
I didn't explain well enough. I am referring to powering up by applying power, NOT by pushing the power button. By turning it off with the power button, it...
I posted this separately from the recent thread so future searches can spot it easier from the subject. Perhaps it should go in the Files Area. The following...
I don't know if this has been hashed out before, but a recent question on the D700 Yahoo group prompted a bit of an investigation. The following applies WITH...
This is a function of the PMs. The radio will always come back to the PM program. To have the radio come back to the same state as when it was turned off then...
Perhaps you've found an anser to your problem by now, and not sure what you mean by "MCP software crashes" do you mean the computer locks up? the program...
Hi Mike, What baud rate are you running? I used an Excel workbook (VBA) I wrote that sends it all at once with no delays between any of characters. I'm also...
Hi Mike, You can do your own investigation to see this behavior. Originally, I thought this behavior was a function of Auto-PM Store, but testing showed it...
Can anyone tell me which is the MC53 and which is the MC58? I have two mics here. One has a case that is a little more to the grey side (lighter than the...
Just bought a used AvMap G4T, unfortunately it did not come with the cable to attach it to my D700A. I understand that this cable requires 4 connections on the...
I have currently rewired my radio to work with the ignition power through via a relay. I am not drawing power through a ignition source, but to turn on and...
I have two Kenwood TM-D700A's and two TH-D7A(G)s... Just recently acquired an AvMap G4T.. now with the expanded capabilities of the AvMap, is there anything...
Data coming to my USB only net book via a prolific type cable appears on my UI-View32 Terminal Screen but (apparently) the Init commands do not take the data...
... I've been using a TM-D700 for about five years and bought a TM-D710 at Dayton last weekend. I've been playing around with the D710 on the bench, so my...
I've been doing it that way for years, with no apparent ill effect. I have a similar circuit, except there's a little timer that runs the relay for about five...
Because of voltage spikes on start up it is always better to start the engine then turn on the radio. I realize that many people never have problems with the...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
