These are the general list rules for the Soling 1 Meter Class message board. 1. This list is for discussions relevant to Soling 1 Meter Class radio controlled...
solingonemeter@yahoog...
Mar 1, 2005 4:30 pm
3900
This is a special notice to let Soiling Group members know that there will be a CHAT get together this Sunday at 4 PM EST. CHAT is a feature of our Yahoo...
Hey, guys, any takers for the Big Boat/ Small Boat Shoot Out at Woods Hole, Massachusetts (Cape Cod) on Saturday, April 16th? Info and a entry form have been...
will send photos and text on transom install ... From: edwin childs To: solingonemeter@yahoogroups.com Sent: Wednesday, March 02, 2005 5:16 PM Subject: Re:...
Edwin, I need your e-mail adress since I cant send pictures this large to the yahoo site. I'm told there isnt enough memory. ---Bill ... From: edwin childs To:...
Our recomendation is: With the mast in the center position and the jib in the forward deck screw-eye, the mast works very well perpendicular to the water line...
I'm buiding my first boat and doing the first model building I've done since 1955. Thanx to all who have posted all the previous great information that I've...
I am not going to install the diamond rig, just uppers and lowers,, the Victor book calls for the spreaders to be located 22.5" from the bottom of the mast,, ...
Palm Beach Gardens Model Yacht Club has agreed to host the Soling One Meter Region 3 Championship for 2005. It will be a 2-day event November 12 & 13, 2005....
In a previous message Paul Fixx mentioned that one of the prizes at the region 3 Championship will be a one piece Sitka Mast. Can anyone tell me where I can...
Paul: Is there a date for the Nationals (I believe it's in Charleston, SC -- right?)? I'd love to be able to tie the two events together into a nice neat...
I assembled and placed everything except the mast and rigging in the boat. The boat had been primed with a couple of base coat colors. I then filled up the ...
I have purchased sitka spruce for my model aircraft from www.aircraftspruce.com. Sitka spruce is getting very hard to find and is expensive. This web site ...
Having just helped with nine kits, I can say that the masts supplied with kits shipped in the recent past seem to be uniformly excellent. Most of these kits...
First check with your local club to see if the upper/lower rig is something they'll accept. If they accept it and you're only going to sail locally then go...
... after seeing the competed boat in the water I can mark, ... You might want to consider a visit to your local Auto Parts store and find some 1/4" Striping...
... Measured this way I get 164 mm. Measured with a vertical dropped straight down from the deck to the water, on the transverse plane where the waterline...
Waterline marking Place six short pieces of light colored electrical tape (white, yellow) on each side of the hull at 6 inch intervals along the approximate...
I've consulted with the S1M Class Advisory Committee and none of us has suggestions on alternate locations of the spreaders. Since it's your boat you can do...
Personally, I think allowing 'club rules' that are different from the S1M Class Rules fosters a situation that can only lead to hurt feelings and unhappy...
AMEN, BROTHER---Bill ... From: Paul C. Fixx To: solingonemeter@yahoogroups.com Sent: Friday, March 04, 2005 10:08 PM Subject: RE: [Soling One Meter] Re:...
I am working on a soling that I started some time ago and got frustrated. What frustrated me is that the keel opening was not cut on the centerline of the...
just finishing up a kit purchased in January 05 and the mast was cut correct,, I laid in out on my workbench (very flat) and butted it up against a straight...
... wrote: What is the ... This may sound overly simple. After checking the bulkhead fit to determine whether the shearline is too high, or too low, on one...
Hi Karen Spreaders exist to keep the middle of the mast from bowing to windward when the wind blows. If that happens, the top of the mast falls off to leeward,...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
