Doug: I have the manual for #10 and would be happy to provide you with a copy for the cost of copying and postage. The same goes for others. It's not a great...
We have the manuals and wiring diagrams for hull 26 if you are interested we can make copies. Let me know, perhaps off-list. Chris Chris and Heather Stockard ...
We plan to add a dedicated track and halyard for a storm trysail and we had also hoped to install a removable inner forestay for a storm jib. The plan was to...
Doug, I installed exactly the system you are describing for the storm staysail on Camelot. The good news for me (not you) is we have never had need to test it...
Doug, On our hull, #27, I've installed the deck and mast fittings for a storm jib. The boat has been out of the water for some time for other work since then ...
1170
Kennedy
pkennedy01@...
Feb 3, 2012 6:50 am
Thank you Keith and Roger for your comments. I'm going to check into these possibilities further. Roger, did you install the turnbuckle and Dyneema line...
Doug, I did want to be able to easily remove the line, also trying to keep weight down where possible. But to be honest, I just really like the performance, ...
On Pandora I had a rigger install a running forestay a few years ago. The rig attaches at the deck with a folding Winchard pad eye that is backed up with an...
That sounds very much like the removable inner forestay that I rigged on Rigel. The pelican hook at the pad eye has a tensioning wheel on it, but otherwise...
1174
Kennedy
pkennedy01@...
Feb 5, 2012 8:07 pm
Thank you Bill and Robert for the additional information. This seems to be a fairly consistent approach so I've sent the information back to our rigger and...
Just thought I would post a quick message that I am doing a run of stainless frames that are wider that the originals. Drilled and Countersunk holes: $400 for...
1176
Tim Szabo
tszabo@...
Feb 23, 2012 2:33 pm
I'll take a set of drilled. Tim Szabo Kinship #19.-----I assume these are for the fixed port remediation. From: Saga_Yachts@yahoogroups.com...
Dear all, I sent the following to Fisher Panda's website. It might be of use to one of y'all. Hopefully not, because you haven't had the problem. Rex...
I had a Fischer Panda on VoltAire when she was an electric boat. Nothing but trouble...never worked for more than 3 days in a road. Part of the problem is...
Rex I've had the same problem on a Westerbeke Generator in Altair. After trouble shooting for a couple of days while we had guests on board the problem turned...
It was good see you again in George Town, Hans. Thanks for coming by. After 6 years with this boat, I'd think I would be better is estimating average passage...
Hi Group, I know someone must know this bit of trivia. What is the size & or type of cutless bearing that would be on our boat, hull # 52, 2003? Thanks, Bill...
Hello Group - eventually, Mary and I are relocating to a small town in West Michigan, right off the big lake. We're at a stage now where we're considering the...
Rick Instead of a Tartan, have you considered downsizing to a Saga 35? Hans S/V Moondance Saga 35 #7 ... From: rglyonsjr To: Saga_Yachts@yahoogroups.com Sent:...
Hi Rick, I would say first off, if you don't HAVE to sell right now, then don't. And I'd say this to any boat owner. It's still a buyer's market from what I...
1187
Saga_Yachts@yahoogrou...
May 23, 2012 1:42 am
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the Saga_Yachts group. File : /SoLunaMare...
Hi All, I've just uploaded a pdf file to the Yahoo group site describing a series of projects on our Saga 43 I've undertaken the past several months. It's a...
1189
Kennedy
pkennedy01@...
May 24, 2012 1:13 am
Hello, I'm still familiarizing myself with our new boat (Hull #20 - 1998) and I have a couple of questions that someone may know the answer to. The first ...
Doug, Welcome to the group of happy Saga owners! Cockpit shower: I know that several of the original shower assemblies have been replaced over the years, but...
Doug, You don't mention pushing the button on the end of the shower handle after you set the temperature by turning the valve you mentioned. The button is what...
The shower mixing valve in the cockpit turns on and off by pulling the handle out and adjusts the temp by rotating the valve handle. I don't think I can add...
Hi Doug, For the cockpit shower, turning the valve adjusts hot and cold. You pull the valve handle out to make water flow- it took me over a year to figure...
1194
Kennedy
pkennedy01@...
May 24, 2012 3:48 pm
Thank you everyone for the tips. I didn't realize that the cockpit shower valve had to be pulled out, not just turned. It works fine now. I've also located...
