Hello all, I have been emailing back and forth with Dave Lochner for a while now about trying to get the shaft seperated from the coupling that attaches to the...
After seeing to the the posts about Christopher & Regan vs Boat US I, as a Boat US insurance customer, went about getting a quote from Christopher & Regan. It...
Hi, I am trying to work out some stability values for certain yachts to help (but not define) what boat I lean towards for myself. To that end I was hoping...
Hello.. all.. I'm here because I sold a larger cruising sailboat and I'm thinking that the Sabre 28 would work as a single handed, short handed, solo sailor...
I've have the dreaded soft mast base. the underside of the sole flooring is wet with a soft area just in front of the head. The actual floor appears to be...
So...anyway, There i was in Oriental, changing the exhaust hose which had blown a hole in the Alligator river (btw JB weld is an awesome bandaid for pressure...
Last weekend a plastic/nylon trim that surrounds my s/s ports on the exterior came loose so I removed it. The adhesive material seemed softish, possibly...
the store data on www.safgas.com is pretty out of date so i was wondering if anyone knows of a CNG exchange in FL.. i would like to get a new cylinder before i...
Having owned a Sabre 30 many years ago on the Chesapeake, I am thinking of returning to Sabre in my old age. Courtesy of Dave Evans, I became aware of this...
For those who don't subscribe or haven'tread the latest issue of Cruising World, there is an article on installing an anchor windlas on an "older" Sabre 34. It...
I am considering keeping my boat in my marina slip this winter in state of RI. Any winterizing advise would be appreciated - I winterized same as if boat was...
For those of you who haven't yet removed their mainsails for the winter, here's a great singlehander's technique I've been using for a couple of years. It...
To all Sabre 38II owners; This is probably a long shot, but the admiral is requesting that I remove all of the salvaged stuff that I felt I just might need in...
I came across this on YachtWorld: This is a project boat. It has an Atomic 4 gasoline engine and has been sitting for a year or two. It is in need of...
I have a waterboot ( waterboot.com) that is custom sized for the boat. It works much better than the universal or trim to fit types. I also use a Sunbrella...
Its time to replace the mast boot in time for the winter rains. The choices at the local store are the Universal type by SSI and the Rubbeweld tape type by...
Pete, Godwin, Ed, and everyone Do the temps coming this week on the middle Chesapeake require winterizing for a boat in the water? I just don't know what...
Greeting to all, I thought I would offer this to the list before it goes on eBay. I have a Heart 25 inverter for sale . This unit was just in for service and...
The faucet in the head looks corroded and I would like to replace it. Anyone have a make and/or model number? I'm trying to find a replacement online....
Hey folks, has anyone out there pulled the water tanks on an S34 (MkI) I've got leaks in both tanks, and I'd like to pull the tanks, to test/repair them. I'm...
When I removed the intake hose from the exhaust elbow it was pretty well blocked. I took a screw driver and routed it out. Is there anything else I should be...
I've been told that sailing upwind on jib alone puts excessive stress on the rig. I'm sure this depends on the wind speed as well as the size of the jib....
As you may know, the plan was to head south from the Chesapeake this November in Surfer Girl. Well, last week the anticipated job in Florida fell through. At...
Has anyone in the group experience water seeping onto the cabin sole from the base of the mast on a Sabre 34 Mark II or any other similar model. Another...
While scraping barnacles and loose paint off my keel I noticed there are sections of loose glass filled resin over the lead keel. Does glassing the keel make...
 I need some help from all of you engineers. I have a great 20 year old Panasonic (tube) TV on my boat that works flawlessly and only consumes about 1.5 to...
