While replacing the lav sink hose on my S28 I came across some dried out barnacles in the storage area under the sink. She's been on the hard all winter, so no...
While launching my s-32 yesterday, the yacht club had a fire alarm company going through all the extingishers. I asked how much it would cost to check out the...
Someone gave me a new Eldridge after I had already splurged and bought myself one. I'll send it to you for the cost; $12.95. I'll cover shipping. Contact me...
Thanks, guys, your help was appreciated. The order's in. Can't wait to spend another day folded up inside the aft lazarette with my 11mm wrench and a bottle of...
jim, I have a 28 also check in the bilge for signs she had salt water in her.. soft wood on the edges of the lip that holds the bilge boards in place.. Mine...
Isn't it wonderful that we can swallow while upside down? Peter ... to spend another day folded up inside the aft lazarette with my 11mm wrench and a bottle of...
Does anybody have an idea on how to locate the screw or bolt heads holding the strut. I've loated the nuts and removed two of four. I hesitate to start...
Paul Once you get the strut out, I highly suggest you sand on the interior with some 60 grit and lay in 2 or so layers of glass. This issue is flexing that...
Its the piece that sticks out of the bottom of the boat and stabilizes the prop-shaft. The bearing inside the strut is called the cutlass bearing, which has...
Paul: There should be four bronze machine screws holding the strut in position. They are buried in putty. The strut sits in a bit of a recess in the...
i just took the plunge and converted all outside lights with LED"S from Hot Wire a local guy to me.. What a difference in my current draw. now if there some...
Here's the letter from Hood with the specifics of the asym I have, along with a photo of the sail in the Bahamas. The sail is 20+ years old, but I don't think...
If you are properly prepared, and do everything in the right order, you should be able to do the entire install with at least one foot still in the cockpit. ...
That strut! Thanks, I was feeling stupid. ... From: sid wax<mailto:sid_w@...> To: Sabresailboat@yahoogroups.com<mailto:Sabresailboat@yahoogroups.com> ...
Paul, I suspect my strut my be leaking. This is my first yr with the boat and when I recently went to sand the bottom to prep for painting Inoticed what...
Did you notice that the demo boat for the article is Gary Jobson's 402? Ditto on the sock. It makes the difference between using the chute or leaving below...
Bad grammar on my part - I was just responding to Bill in quasi-bullet points. However, I think Gary would add more to the downwind sail than the sock. ... Bad...
I'd go with Gary, fascinating guy to talk to...Spinaker Sock not so interesting... Sent via BlackBerry by AT&T ... From: Jeff Bartlett <jhbartlett@...>...
So, does your harbor have a putting green? -- James Starkey, Senior Software Architect MySQL Inc., Manchester, MA, USA, www.mysql.com Office: 978 526-1376...
Maybe they discuss how best to keep their rudders from falling out of the boat when they are on a passage. I'm sitting in a marina in Mazatlan where I can see...
My chance to give something back to the list. I have a Rockler Router Table, complete with router, bought new a few years ago, but have never used. (1) Rockler...