Hi As I told you I am preparing a new version. This version will have among others a new User Interface and will support vector maps (Shapes). Right now I need...
I have a USB hubb connected because my computer only has comm1 that is the reason for comm 5 to the radio and comm6 to the sound card interface. The Hubb...
... In this any and age, none of that should matter. Ignoring the *NIX and Mac users (who are UNIX users now ayway) the only versions of Windows that have been...
Joe, I didn't blast UNIX users. UNIX users are expected to be astute with their own hardware and software, or adventurous enough to dig into it. And in the ...
when I connect to a APRS server ? That specific htmlfile is missing in the help program. I wounder if it's possible to exclude stations with, for example, W*...
Well that was totally stupid to say on your part (i get to say that since you decided to blast *nix users), as a matter of fact there are people who run linux...
Hi Wayne Remove the soundcard interface, for the moment.... And try to fix the receiving problem first. Packet Engine (both versions) can handle any serial...
Hi PSE stop that war. There is no reason for that. Anyone can use anything he likes. Both OS are perfect and since are two each one benefits from the other. ...
Hi In the Gateway dialog set in the filter field enter "filter p/W/G" without the quotation marks and any other prefix you wish 73 micro USB TNT (A pocket TNC...
Has anyone got known good AGW configuration for the KPC-4 TNC in KISS mode? I'm fixing TNCs again and the fault has been found and fixed, just need to test it....
Hi This was the problem I had with my KAM, every now and then I loose the negative voltage. Anyway In the properties dialog for the KPC4 check dual port. But...
Hello Ant You have found the common fault on KPC-4s and similar units. All that happens is you will get a comms failure of some sort on the RS232 port. As long...
... You can find the complete filter guide for the servers here: http://france.aprs2.net/filter_guide.html The version supplied with the UI-View distribution...
Hi, As the moderator I agree with George. PSE stop this discussion. This Groups is not founded for this kind of discussion. It is founded for the support of ...
Anyone know of any programs, other than UISS and the APRS programs, that can send unconnected/APRS style packets using AGWPE and in particular the sound card...
Wayne, Sure, that helps explain the port numbers. But what did you mean by the radio is on com 5 and the interface on com 6? What is on com 5 -- a radio ...
Hi all, I just installed AGWMonitor on my XP and AGWPE PRO system. When I start the program it displays the first two tabs (MHeard, AGWMonitor) and crashes...
Andy, Do you have a firewall program running? If so, shut that down. If that fixes it, then you'll have to configure the firewall to allow access to port 8000 ...
Hi, I am unable to get anything out of AGWPE... I have tried sound modem, and can decode packets. However, when I fire up AGWPE, select "line-in" I get...
Ralph, thanks for your suggestions - I had already tried the firewall thing and the anti-virus thing etc. as well as checking that I had the latest software...
Andy, Which program "fails" when you add back in the sound card port -- PE Pro or AGWMonitor? If PE Pro, the sound card setup may be failing because you are...
I'm confused. You say you "tried the sound modem and can decode packets". With what program? Because then you say you "fire up AGWPE" and "get nothing"?!?! ...
The tnc work properly with winlink in the none.When I winlink mode to AGW with AGW running it try to connect,but nothing happen at tnc or radio.It want key the...
Ralph, I apologize for lack of clarity in my last post. It is AGWMonitor that fails with the sound card configured - PEPRO works fine with every wierd...
Hi Be sure that you have the lates version ,currently in my site. www.elcom.gr/sv2agw/inst.htm I will release new version very soon because current has...
Good Afternoon, I just recently went back into packet but I wanted everything to run off my soundcard, no external tnc. I went back to AGWPE using UISS as my...
Glenn, AGWDigi might work for your purposes or try the more advanced AGWUIDigi program which you can download at http://www.elcom.gr/sv2agw/agwuidigi.zip Had...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
