Hi George, Is the UNDigi the digi software supplied with the new microTNC hardware? I cannot find a reference to UNDigi using Google. Thanks, 73 Randy - KK6RW ...
Randy, George just had a typo It's called AGWUI-Digi http://www.raag.org/sv2agw/agwuidigi.zip Ralph KC2RLM _____ From: Randy [mailto:kk6rw@...] Sent:...
As many of you know, I maintain the "Sound Card Packet" website. It offers extensive 'help' for those trying to implement the AGWPE program's sound card modem...
Ralph, Are you searching for a mirror? If so, let me know, I may either be able to host your mirror, or find you a site to do so. -Daniel KD5UZZ On Fri, 1 Oct...
Hi I have a BayCom USCC>4 card that I would like to use on my windows 2000 machine. Does AGWPE or AGPE Pro support this card under 2k? Thanks Jon MM1CQO...
Hi, I'm helping a friend setup AGWPE on a laptop (a fairly recent looking Dell I think) for use with UI-View. He'll be using the soundcard as the modem with a...
... I have a Dell laptop with the same issue. It seems to decode random packets but it's not realiable. I'd be interested in any solutions folks have found. ...
Try and see if there's an updated driver for the sound-card. Sometimes that will help. Jack KE4LWT ________________________________ From: Tyler Allison...
The mic input could have an automatic level control on it and be overloading. Sometimes if you right click and select adjust audio properties you can get to...
Hi Do the follow 1.From Packet Engine Properties select only the LEFT channel. Remove the right channel. You can do it easily editing manually agwpe.ini and...
I am trying to interface the AGWDigipeater software with the AGWPE. Is there any special setup instructions with this? I can not seem to get the digipeater...
I'm running AGWPE on an IBM ThinkPad 760 using LPT1 for the PTT control. Everything worked fine when I was using it in the single channel mode. Now that I've...
Tony, I have used the program Digiplex which is available off a link from the AGW PE site. It is more capable (but requires some reading and setup). It can ...
Hi, I have a Toshiba 660CDT laptop. I have AGWPE loaded on it. When it is running and the radio is plugged in to the line in jack, I hear packets in the...
Hi Go to File/Properties In the Packet Engine section add the computer name or IP adress where Packet Engine Runs. Do all other configurations the way you...
George, Thanks for the reply. Maybe I am not using the most current AGWPE. I do not see where to enter this information. I am using version 2002.10. Tony ......
I'm not sure on this but I know some early 90's Thinkpads like the 755 used a single DSP chip for modem and sound. They become unreliable as you load them...
I have used AGWPE and PEPRO on a machine with WinMe using LPT1 for PTT. Now I have installed both on a WinXP machine. Neither will work the PTT on LPT1. A...
Gene- Some educated guesses: Assuming the software works with XP, and that your new machine is also certified XP compliant, you should check the LPT port setup...
Neither AGWPE or Flex32's sound modem would even load on my Toshiba Satellite Pro 400CDT, so you got farther than I did. Have you tried the sound card tuning...
I tried all three BIOS options for the parallel port. Same result. Because I thought I might have a hardware problem, I checked voltages at the DB25. The...
My laptop is a Toshiba 660CDT AGWPE will run OK but does not decode packets. The 660 is a 150Mhz pentium. I can hear them in the computer speaker but nothing...
Hi Just one check. Go to control panel/system/ device manager and see what is the name of the lpt port. Select the same name in Packet Engine Pro. 73 micro USB...
For AGWPE, the LPT1 port must be configured so its input/output range is 0378-037B and it's interrupt is 7 (Legacy settings.) Look out for plug-and-play...
Hi Mike don't know if I replied properly or not. I can not see packets in the AGWTERM window and nothing shows in the oscilloscope window either. Dave David I...
Dale- With a great deal of difficulty (something was assigned IRQ 7), I did as you suggest. And the settings also now look like the ones on the old notebook...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
