I am running SFX 5.6 b19 with a Layla PCI 24 driver 6.14. I need to use the S/pdif outputs. although the Layla tray says I am coming out of the S?pdif and not...
Hi all, I am wondering if there is such an adaptor that allows me to use SFX with a Layla Card and a lap top...If so, where do I get one that I needed...
The Layla 24 units used to have a Cardbus Laptop adaptor available for them. But both the Layla 24 and the Layla 24 Laptop are several years out of production...
Have you tried changing the setting in the Echo Console, and then starting up SFX. I would bet that the changes can not take effect while some software (like...
Hi Ryan, I use a audiofire8 with my laptop via my IEEE 1394 port Works great only thing, be sure to have the audiofire software update, ver 1.06, I found out...
Hey all: This summer I uprgaded our SFX rig to WinXP SP2 and SFX Build 19. So far, all is going fine with one oddity: In the mixer, all groups must be...
... I've definitely not had this problem, and I've been running build 19 for quite some time now. It ran all the shows at the summer rep this past season, and...
Thanks, Richard, this makes a great deal of sense. I just turned this off, when they next take a break we'll give it a try. It certainly hasn't been an issue...
Thanks, Richard, this was indeed the issue. Ben Emerson ... -- Benjamin Emerson Audio Supervisor Huntington Theatre Co. Teaching Sound Designer Boston...
I started using SFX with a Layla 3G card about a year ago and everything worked fine. Clean audio in and out. After not using the system for a few months now I...
... Have you checked all the word clock settings, to make sure it's either on internal, or locked to some other clock, and if it is locked to another clock, is...
Hey gang, so my lap top computer does not have a working firewire port, so I am wondering if any of you have a USB Interface with SFX? Any ideas? -Ryan Rumery...
If you need more than one stereo output then get a new laptop or a pcmcia firewire card. USB doesn't have a constant transfer rate like Firewire has for...
... Actually Roland and..... (should I say it...???) Behringer both make some multi-channel USB2.0 interfaces. M-Audio does as well I think... or at least...
Thanks. After making sure the Layla card was good on another I machine, I started to double check other things that had changed on the problem machine. A...
Hey Ryan, The MOTU 828mkII is the high speed USB 2.0, here is the link: http:// www.motu.com/products/motuaudio/828/ It has more then a stereo out. However it...
MOTU makes a USB2 version of the 828. I assume that it's mostly meant for PC users, as all Macs have FireWire built in. Haven't tried it yet though. I'm sure...
Hi everyone. I'm new to the SFX users group but have been using sfx for a few years. I've run into an SFX problem I've never encountered before. I loaded my...
I had the same problem a while ago and found that it was due to my files being too short - I found that if they were less than 2 seconds they would come up on...
Check your patch assignments on the backup, because or the different sound cards I'll guessing your outputs might not match . ... [Non-text portions of this...
Hi all, So, my SFX computer has started acting odd. It's running XP Home SP1, SFX 5.6 Build 19, Gina 24 w/ 6.08 drivers. It's only a 900Mhz Celeron, with...
Hello all, I recently sent CDs with my show files (both SFX and .wav) programmed in SFX Standard version 5.6 build 17 to a theater with SFX ProAudio Version...
... That machine should still have plenty of gas, unless you are really pushing the envelope. I would try some newer Echo drivers though, if I were you. But...
... Yes, moving shows from newer builds to older builds will likely cause problems. Best way to solve it, is to run the same build that the show was built on....
... No other devices are involved. I've even disabled the NIC card, and the internal audio, as well as Timbuktu. What would be considered "pushing the...
I thought Build 19 had to be on XP SP2. Could be your trouble? B Jeremy Lee <jeremylists@...> wrote: Hi all, So, my SFX computer has started acting odd....
... This could easily be doing it. I've had more than one machine start to have unexplained crashes and errors when faced with unreliable power in a building....
Is there any way to test a power supply before it blows? I had the case open a few weeks ago, and there wasn't that much gunk in there... ... -- Jeremy Lee ...
When I upgraded, the folks at Stage Research said otherwise. The installer needed an updated windows element (not documented anywhere) but it performed well...
... SFX will work fine in XP SP1 as long as the missing DLLs are installed noted in our KBase and the MSI installer is also updated. SP2 is prefered as all...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
