Why not use a third-party recorder. My favourite is Total Recorder (see totalrecorder.com). It supports a large suite of recording formats including flac, it...
Hello all from Phil G3YPQ Devon/Cornwall. Received what might be the first ever 2nd hand SDR-IQ and very happy indeed with it and mounted in its Maplin...
Thanks for the tip, Bjarne. I'll have to check it out. How does it work for opening the compressed audio file and feeding it back through SpectraVue? Or must...
Hello, Just for the fun, I have posted a Winrad screen copy of the pile up on 40m (25-30Khz wide !!), may be the dx is BS7?? Anyway, having very good time with...
When using Spectravue the sound card is busy producing audio. How do we decode PSK31 etc and use programs like MixW or tru-tty do we need a second sound card...
... Some hams using SDRs (SoftRocks and Flex SDR-1000) have used the Virtual Audio Cable (VAC) software. This creates virtual connections between audio...
Phil, You can run both programs at the same time and select the Audio Mixer Input for the PSK31 decoder. The audio will get routed internally. You only need a ...
Hi Pieter: Many months ago I got a stereo type heterodyne type bat monitor from Germany. Last night the weather here in Northern California was warm enough for...
... I use two soundcards. It is not much more expensive than the virtual audio cable and allows the insertion of an audio filter (Timewave or analog filter)...
Using two soundcards also lets you overcome the very annoying situation where a badly written, tacky, piece of software(*) won't let you choose a soundcard,...
No, at the moment it only works from the default soundcard. When I ever get round to it, I'll learn how to get VB-6 to interface to the DLL driving the...
This is just about the most trivial suggestion for improving the SDR-IQ but I find the LED's a bit bright! you could save a few mA by upping the series...
Has anyone had any success with Quick Spectra, available from the downloads on this group? Running the .exe results in the message: "sdr14x.dll or one of its...
Andy, You need to register the SDR14x.dll. The files can be downloaded here: http://www.moetronix.com/files/sdr14xsdk110.zip You also need to install it in VB6...
Hello....are there any tips for using the SDR IQ with VISTA on a fast, new laptop? 73, John W3HMS, 12 May 07 ************************************** See what's ...
Though I have not tried it, I assume you also need to download sdr14x109.zip (also available in the Files section) and follow the instructions to register the...
I also noticed what has been reported by others: the noise floor is higher when playing and RF recording than when listening to SDR-IQ while recording. It is...
Hi All, There will be a small batch of SDR-IQ board level units available at the Dayton Hamfest. We had allocated 20 units from the first batch for sale at...
Hi: I wonder if this method of using the RS-232 port CTS & DTR as the I&Q channels from the shaft encoder could be applied to the SDR-IQ? It would allow...
Unfortunately those outside US will have to wait for alternative supplier as Universal-Radio only ships to addresses in US and Canada Jan G0BBL Re: Small...
I just received my SDR-IQ OEM today from Universal. It installed with no problem and works fine on my notebook. However I ran into a problem with the...
... Hi, I'd try doing an 'update driver' from the device manager. It will probably appear under 'USB devices' in which case, do a right click, update driver,...
Hi All I got my SDR-IQ some time ago and am very pleased with it so far. Is there any way of turning off the AGC? This would be useful for beacon monitoring...
Hi I don't have an SDR-IQ, yet; but a couple of things to try: Does your desktop pc when running SpectraVue, allow the demo recordings (from RFSpace website)to...
