Just to say, it looks like there is a problem at this time in getting contact to Frank and from Pete, on the updates. Pete I have seen your letter via Frank. ...
Hi Steve, Just to add to the fun, I sent you an email this morning, and it was sent back as undeliverable. Perhaps we should use some other system than yahoo...
Hi Pete, It is strange that Yahoo, ie our mail with the group is functioning. But yes I agree we need a better system than this, and I am working to that end....
Well, I have all the gears rough cut out. The center hole has been drilled and reamed in all but one gear blank which I will do tomorrow night. Slow, but a...
The gear blanks are all drilled, reamed, and broached now. Sure could use the information below. Anyone got an idea? John L ... tomorrow ... invested ... 1/2...
John, the 81 tooth gear that I have has not got the two small holes that you mention, neither do any of the others that I have, 48, 69, or 90 tooth. all the...
Jon Thanks for your help. John ... John, the 81 tooth gear that I have has not got the two small holes that you mention, neither do any of the others that I...
Thanks Thant make life a little easier John ... I can verify 81 has no holes, also my 40 and 72 have no holes. Mike in Bremerton --- In Rivett-608@yahoogro...
Message from Steve group owner to Michael. In answer to your last email received this morning Sunday 10th June I have written to you many times, I have replied...
Thank you Steve - I still don't fully understand the workings of the 608 Group site (the only Yahoo group to which I belong). If I go to the members list and...
My appologies Steve- I finally figured out how this works. I found this and one other message from you here in the Yahoo mail bag after thinking over my...
Hi Michael, Nice to finally have contact with you. I am glad also that you have figured it out. All the best, Steve _____ From: Rivett-608@yahoogroups.com...
Hi, I am member hms50 but I keep recievig mail to Rivett 608. _____________________________________________________________ Click for a second home mortgage,...
Hi who ever you are “Member hms50”, Every posting to the group gets sent to every member who has elected to receive it, regardless of content. In other...
WELL I HAVE NOT YET STARTED CUTTING THE GEAR I HAVE A SOUTH BEND 127 TOOTH THAT I WILL MAKE A INDEXING PLATE OFF OF AND DECIDED TO USES A LITTLE BARNES...
TOM CAME OVER AND WAS HELPING ME FIGUIRE OUT THINGS AND I DO MEAN TOO MANY THINGS 608 AND I SAID WHAT IS THIS ABOUT AND I HAVE A HEADSTOCK WITH A 5C...
Did any of you guys bid on that 507 that was on ebay? The reserve seemed mighty high, but given the way some rivett stuff has been going, you never know. I...
... I would have bid on it...except that it was local pick up only and I live in the UK! I suppose you all noticed that it was the rare high speed head model ...
... Mike in ... 90 ... been ... invested ... the ... need ... this ... wholes in them on the out side of the 1/2 plain boston gears come that way it is for...
... I ... the ... ihave 2 of those switches with one wired to a 6 strand motor with 12 speeds and one winding and it is hooked up to a gear box that goes from...
Hello All: I'm trying to ascertain if the parts lathe on Ebay has a thread dial, but am unable to identify one in the pictures that have been posted. The owner...
Just a gloat..... a couple of weeks ago on a trip I picked up some Rivett-Dock threading cutters for $ 1.25 to $ 4.00 each depending how much use was left in...
As a newbie.. I was kinda confused by the only tailstock accessory which came with my 608... A Brit made Jacobs 1/2" chuck... This fitted perfectly and...
I have been emailing Rod about tailstock tooling. I called Riten to see if they would be willing to make some dead centers with the Rivett taper. They will...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
