Hi, As has been discussed and published a number of times on the net, there seams to be a pretty serious problem with USB on the RPi, which has its effects on...
The model b 512mb is now in stock, and available at the electronics maker site, Adafruit.com, with a max of ten units each, per order. I just grabbed...
I went back over my notes and re-read the Osmocom installation instructions and what I've seen elsewhere and have put this sequence together for creating a...
I have my station set as a fill-in digi. There are weather stations that don't use wide, they use a two digit state code so weather packets don't cross state...
Hi all I am new on this group, an also new on Rasperberry pi (LINUX) I hav no idea of programing in linux, but i tray to have my pi running HRD remote server. ...
... But, if you don't need the graphical real time Spectrum rendering on (a large) screen, just the audio demodulating, that can save a huge ammount of CPU...
SDR article discusses Pi Server application...remote control. http://www.hamradioscience.com/raspberry-pi-as-remote-server-for-rtl2832u-sd r/ ... From: John B....
... It does have the power, and the "soundcard" is within the Dongle itself, it's just software that is needed. The dongle in essance, is a simple soundcard,...
... Looking some more at the SDR# downloads page http://sdrsharp.com/index.php/downloads I see on the left, there is a "One shot install script for Linux" A ...
Anyone know of a program for the PI that can communicate with a battery backup so it can be shutdown when the batteries are depleted? If I could find a program...
Pi-people: Using the gui (either the LXT or a root terminal. Looking at the F9 screen in JNOS, the scroll bars are greyed out and the mouse wheel wont scroll...
Be careful over clocking your RPi with over_volt set to 6 even with the new firmware! Ive now killed 2 cards. Ive taken out 2 sd cards. I was attempting to...
Any one where able to install asterisk w/latest app_rpt and radio channels, so Raspberry can be used as a controller for a repeaters like the XIPAR do ? I...
Hi to all, I'm trying to use soundmodem with an external USB soundcard (dirt cheap type), however there is some issue with the packet decoding. It seems that, ...
Good evening, Anyone else here finding it hard not to find ways to acquire more of these? I have two more in transit along with a Beaglebone. I have to figure...
Hello Group, I just wanted to pass this along to this group since I thought it applies here and is pretty exciting stuff. I have heard the "Pi on the air" this...
Okay, fresh from Dave Cameron himself, as posted in the irlp group... First thing, back up your existing install using the "backup_for_reinstall" script. It...
Good Afternoon, I am also new to the Raspberry Pi and slowly learning Linux. I have a friend that has been writing and using a program called KB. This has been...
Hi! I've just joined this group. I got my first Raspberry Pi yesterday and with some assistance from a colleague, got it working today. I know nothing about it...
Hello Group, I'm Mike, GM1WKR (MM0CKR)(Aberdeenshire, 41y/o. lic 1985) and am very glad to find a dedicated RPi Ham group - Hello to you all and Happy New...
Hi everyone and a very happy new year to you all. My name is Allan (G3RDC) and I have had my RasPi for about six months. I have done quite a bit of programming...
Hello eveyone, I've been toying with the idea of using a Raspi and Svxlink (http://svxlink.de/) as the replacement for our actual Echolink node. I've read a...
Simple fix. I was writing in "TUN1" to the autoexec.nos in place of "TUN0" which had been used successfully on another machine. That was evidently the cause of...
Hello all. I just complied JNOS on my raspberry Pi which is running debian wheezy. For some reason, when I run jnos, I get the following error message: tun1:...
Has anyone tried compiling the axdigi program in the Raspbian environment. I am trying to build a Packet node on the RaspberryPi but it looks like even though...
Hello all. KC9RNN Gary here. I have only been a Ham since 2010. Looking forward to getting involved with the raspberry pi. I thought when I first checked it...
Hi All, I'm Ray vk2tv and I just wanted to introduce myself to the group. I've been a licenced op since 1969 and for the last 25 years 99% of my AR activities...
i was wondering if anybody had used the 26pins for anything. cor, tor, ptt ? anybody tried direct interface into a radio. i was mainly curios about making it...
