Only RadioCom 4.52IC and RadioCom 6 support these new ICOM receivers.
Details at www.bonito.net or www.computer-int.com

Cord W8/DL8FAI

Just received the Radiocom 4.5 software.  I am using it with an Icom
PCR1500.  My computer is an HP using AMD athlon cpu and Windows Vista.
So far I have been unable to get the software to function.  I can hear
the usb make the connection but, it only holds for a milisecond or so
and then drops off.  Is anyone using the softwear with a similar setup
that might could helpe me??

Thanks,
Larry

No, if you are using RadioCom 4.5IC. Works with RC 4.5UNI.

Check with radiocom@... directly, the US support center.

Cord, DL8FAI

--- In RadioCom@yahoogroups.com, "steveallen85" <steveallen85@...>
wrote:
>
> Hi
>
> Back when I first bought my icom, I recieved a copy of Radiocom 4.5
> (the pcr edition), and at the time, everything worked great.
>
> Now, due to space constraints, I must leave my icom in one
location,
> and remotely control the radio from my computer.
>
> Now, I still want to be able to decode stuff using the program,
but in
> order for me to start it up, I need to have my radio plugged in (it
> checks the com port).
>
> So, is there a way I can open up the program without having my
radio
> hooked up, and just use the sound on my sound card?
>
> Thanks!
>
> -Stephen
>

Hi

Back when I first bought my icom, I recieved a copy of Radiocom 4.5
(the pcr edition), and at the time, everything worked great.

Now, due to space constraints, I must leave my icom in one location,
and remotely control the radio from my computer.

Now, I still want to be able to decode stuff using the program, but in
order for me to start it up, I need to have my radio plugged in (it
checks the com port).

So, is there a way I can open up the program without having my radio
hooked up, and just use the sound on my sound card?

Thanks!

-Stephen

Hello everyone,
I am considering the Radiocom software, and would like to know if
anyone is using it together with the Kenwood TS480SAT for deconding
AND encoding?
In that case - how should it be connected - which pins on the pc
should be connected to which pins on the rig? I have looked at the
Bonito site but am not really able to find out how it should be.
Please help!
73 de SM5SNF (Claes)

Hello everyone.

I was curious if anyone would be interested in taking over the
moderation duties of this group?  Althougth there hasn't been much
activity here for some time, there continues to be quite a few members
(118 at last count) with active memberships.  And though I still have
and use my PCR-1000, I have long abandoned using RadioCom some time ago.

Any takers?

Right hand click on the spectrum scope and follow the options.
Glenn Blum
kd5dga
Nolanville,Texas. USA
----- Original Message -----
From: "Jr Bob Dobbs" <jrbobdobbs1@...>
To: <RadioCom@yahoogroups.com>
Sent: Friday, November 04, 2005 6:32 PM
Subject: [RadioCom] RadioCom 4.5 Help!


> First I want to say hi to everyone in the group.
>
> I needed some help on this software. I've installed the sw and am
> trying to use it with my PCR1K, but I'm having trouble. Specifically
> I'm having trouble getting the frequency spectrum and signal meter to
> work properly. I can tune the radio and can receive pretty good
> signals, but the meter does not display and I show no result on the
> frequency spectrum analyzer. I know there must be something simple I'm
> doing wrong, but I just can seem to figure it out. I have read over
> the manual, but it leaves a lot to be desired. If anyone has any tips
> they would be greatly appreciated.
>
> Thanks,
> Jr Bob D.
>
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>

First I want to say hi to everyone in the group.

I needed some help on this software. I've installed the sw and am
trying to use it with my PCR1K, but I'm having trouble. Specifically
I'm having trouble getting the frequency spectrum and signal meter to
work properly. I can tune the radio and can receive pretty good
signals, but the meter does not display and I show no result on the
frequency spectrum analyzer. I know there must be something simple I'm
doing wrong, but I just can seem to figure it out. I have read over
the manual, but it leaves a lot to be desired. If anyone has any tips
they would be greatly appreciated.

Thanks,
Jr Bob D.

Just got a pcr-1000 and wanted to try the 4.5 version of the Bonito
software that came with the radio.  It installs fine, but when I run
it, I get an error.

RC45.exe - Application Error

The instruction at "0x0041e68" referenced memory at "0x00000080".  The
memory could not be "read"


It does this on both of my boxes.  One is a P4-3.2HT running XP-SP2
and the other is a Centrino-1.6 laptop also running XP-SP2.  It does
this regardless of whether the radio is on/off, connected to com1
directly or via another com port via a USB adapter.

Other software can talk to the radio just fine, so I know the radio is ok.

Anybody have any clues or help?  Don't tell me to simply pay for an
upgrade as I'd like to see the program work at least once before I
shell out bucks for an upgrade.

Thanks


R

Cord,

Thanks for the reply. It was nice talking to you at Dayton on Saturday too.

Is there a better place for me to ask questions of Bonito rather than the
public place on Yahoo?

73, Bill, K3ZAA

Bill Welch, Columbus Ohio, USA
TCI, ATCA#3670, HamRadio K3ZAA
K3ZAA@...

----- Original Message -----
From: "dg8fai" <dg8fai@...>
To: <RadioCom@yahoogroups.com>
Sent: Saturday, June 04, 2005 9:02 AM
Subject: [RadioCom] Re: RC v5.2


> Hi,
> I forwarded your findings to BONITO for review.
> They should be back in the office by Monday.
>
> Cord
>
> --- In RadioCom@yahoogroups.com, "k3zaa" <k3zaa@a...> wrote:
>> I bought an upgrade to RC at the Dayton Hamfest. v4.5 came with my
> Icom
>> PCR1000 and now I'm trying out v5.2.
>>
>> One thing I noticed that after running RC, the PCR1000 no longer
> works
>> like it used to when I go back to running the stock Icom software.
> The
>> signal strengths on the scan scope are reduced by quite a bit and
> the
>> noise floor (on the scope) increased.
>>
>> I had done a backup of the EEPROM in the PCR1000 before running
> RC. I
>> did a compare of the EEPROM data before and after using RC. RC is
>> definately making changes to the EEPROM. When I restored my
> PCR1000
>> EEPROM from an original backup, the radio started working ok again
> with
>> the stock Icom software.
>>
>> Anyone else had this experience or know any more about what RC
> might be
>> doing?
>>
>> 73, Bill, K3ZAA
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>

Hi,
I forwarded your findings to BONITO for review.
They should be back in the office by Monday.

Cord

--- In RadioCom@yahoogroups.com, "k3zaa" <k3zaa@a...> wrote:
> I bought an upgrade to RC at the Dayton Hamfest. v4.5 came with my
Icom
> PCR1000 and now I'm trying out v5.2.
>
> One thing I noticed that after running RC, the PCR1000 no longer
works
> like it used to when I go back to running the stock Icom software.
The
> signal strengths on the scan scope are reduced by quite a bit and
the
> noise floor (on the scope) increased.
>
> I had done a backup of the EEPROM in the PCR1000 before running
RC. I
> did a compare of the EEPROM data before and after using RC. RC is
> definately making changes to the EEPROM. When I restored my
PCR1000
> EEPROM from an original backup, the radio started working ok again
with
> the stock Icom software.
>
> Anyone else had this experience or know any more about what RC
might be
> doing?
>
> 73, Bill, K3ZAA

I bought an upgrade to RC at the Dayton Hamfest. v4.5 came with my Icom
PCR1000 and now I'm trying out v5.2.

One thing I noticed that after running RC, the PCR1000 no longer works
like it used to when I go back to running the stock Icom software. The
signal strengths on the scan scope are reduced by quite a bit and the
noise floor (on the scope) increased.

I had done a backup of the EEPROM in the PCR1000 before running RC. I
did a compare of the EEPROM data before and after using RC. RC is
definately making changes to the EEPROM. When I restored my PCR1000
EEPROM from an original backup, the radio started working ok again with
the stock Icom software.

Anyone else had this experience or know any more about what RC might be
doing?

73, Bill, K3ZAA

I realize i've been a bit lax in approving people for the group, and
thought i'd send out a quick apology to all those whom have had to
wait for the approval.

Like new, in original case: RadioCom 5.2 CD, dongle, User's Manual,
and cables for Yaesu FT1000MP/FT920. $100 + shipping (firm). Please e-
mail me privately if interested.

Dave, W2PK

Hi,
the current version is RadioCom 5.2.
Upgrade from RC5.1 to RC5.2 possible.
I used RadioCom with NRD 535.

More details at www.bonito.net (Germany)
and
www.computer-int.com (Florida/U.S.A.)

Beste Gruesse aus Florida
Cord, W4/DG8FAI
RadioCom Support

--- In RadioCom@yahoogroups.com, "pietrobossi" <pietro.bossi@b...>
wrote:
>
> Hello,
>
> i would like to buy RadioCom 5.1, but i need to know if some one
had
> a try with a JRC-525, what controls could you have on the radio?
> (frequency, channels,bandwith, mode, etc...).
>
> What are the strongest and weakness points of bonito radiocom to
be
> used as hobby freq. decoder and receiver controls ??
>
> tnx all for your precious help !!
>
> Pietro, HB9RXC

Hello,

i would like to buy RadioCom 5.1, but i need to know if some one had
a try with a JRC-525, what controls could you have on the radio?
(frequency, channels,bandwith, mode, etc...).

What are the strongest and weakness points of bonito radiocom to be
used as hobby freq. decoder and receiver controls ??

tnx all for your precious help !!

Pietro, HB9RXC

Licensed version of Radiocom 5.1 for sale or trade.
Includes all CD's and IC-SWL dongle - works with PCR-100, PCR-1000, Drake
R8A/R8B
Please email me privately if you're interested.
Tom-

Just an FYI - I have set the group to membership approval for future
members.  I saw another spam email come through today, and since I was
making changes to another group anyway, I just changed this group as
well.

Membership approval should be done immediately after a request has
been received.

Marty

hello  group
          i  nave already  asked  abt  radiocom  users  group  if
they  think  that  radiocom  is  worth  buying  but  for  some  reason
no  one  is  prepared  to  give  me  a stright  answer  so  what  is
the  reason  for  i  don,t  know  so it  looks  like  it  is  mot
worth  buying  unless  some  one  will  be  so  kind  to  speak  up
hope  that  you  don,t  find  this  e  mail  rude  but  i  am  fed
up  with  asking  the  same  think  i  tought  this  group  would
be  the  group  to  get  a  stright  answer  but  it  don,t  seen
like  thats  all  for  now  hope  some  will  answer  this  e  mail
  take  care
                                alun  gw0fjq
    pse   this  will  be  the  last  time  i  will  asker

--- In RadioCom@yahoogroups.com, "dg8fai" <dg8fai@y...> wrote:
>
> go to www.bonito.net and go to 'Dealer' to check for your region.
>
> or
>
> check www.computer-int.com in the U.S.
>
> Cord
> W4/DG8FAI
>
> --- In RadioCom@yahoogroups.com, "gw02639" <GW0FJQ@A...> wrote:
> >
> > hello
> >       i  am  new  to  this  group  can  any  one  tell  me  what
> it
> > would  cost  to  be  up  and  running  i  am  using  a  ft920
> and
> > a  rig  blaster  i  have been  i  contact  with  waters  and
> stanton
> > and  they  have  not  been  in  touch  with  can  any  one  help
> tks
> >                          alun  gw0fjq

hello all  to  the  group  can  any  one  let  me  know  if
radiocom  is  worth  the  money
                                   thks  alun

Can anyone tell me if the latest version is worth its weight in
gold...I see a lot of questions on this subject and no replies...even
the franchise suppliers give no answers...Gf

go to www.bonito.net and go to 'Dealer' to check for your region.

or

check www.computer-int.com in the U.S.

Cord
W4/DG8FAI

--- In RadioCom@yahoogroups.com, "gw02639" <GW0FJQ@A...> wrote:
>
> hello
>       i  am  new  to  this  group  can  any  one  tell  me  what
it
> would  cost  to  be  up  and  running  i  am  using  a  ft920
and
> a  rig  blaster  i  have been  i  contact  with  waters  and
stanton
> and  they  have  not  been  in  touch  with  can  any  one  help
tks
>                          alun  gw0fjq