My rebuilt 20 amp delco generator will be needing a regulator. The only electronic regulators I can find for it are Zeftronics G1200N and G120VN. Are there any...
Is there a good fix for rocker shafts wearing into valve covers? I've heard of a set screw in the center boss but what about some sort of "button" on each end...
ECI rocker shafts now have teflon buttons for this purpose. ... From: schmayhoo To: Q-200_Engine_Group@yahoogroups.com Sent: Sunday, March 23, 2008 11:21 PM ...
Crazy glue leather pads on the insides of the valve cover where the rocker shaft would rub. You clean it first with steel wool and lacquer thinner. Smooth side...
Just got 20 hours on my overhauled engine. The starter is starting to "freewheel" only when cold. It does so about 2 or three start attempts. When the engine...
I'd get that starter home and cleaned. Don't run it like that. It could be nothing but oxydised oil, condensation, whatever. This could be the repair that...
Hi all, I added a folder "Miscellaneous" with some pics - general description and drawings soon - weight of the ass´y shown is about 150 gr/0.35 lbs. Note the...
Very nice workmanship. Where do you connect the ports? Sam ... Very nice workmanship. Where do you connect the ports? Sam On Thu, Apr 10, 2008 at 5:04 AM,...
I have uploaded a few photos under "Oil Tank for Low Profile" that show a concept for an O-200 Oil Tank assembly. The backbone of the system is a birdgage...
I just went for a peak at Justin Maces web site and after looking at his oil tank, I think the basic design concept is all right there. It looks like aluminum...
I welded a little bushing (1/8" NPT) to the lower front side of the oil tank as supply port and tapped the left front brass cap of the oil galley with a 1/8"...
Phil, I don't know if you ever saw Mark Summers oil tank but he simply took the 0200 oil tank and cut it down to about 4.5 qts. The bottom cowling fits flush...
My O-200 came liberated of many parts including an oil tank. Before an A65 tank popped up, I had contemplated a lathed thick walled smaller aluminum tank with...
Bidding starts at 99 cents. http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=190223021568 Sam Hoskins Murphysboro, IL *Sam Hoskins Quickie Blog...
This is a spam message. I hope this group does not get flooded with spam messages. Ken gopatudgg <gopatudgg@...> wrote: I read your profile today, I...
Things are pretty quiet lately, so I thought I would sell some aviation stuff. I have for sale: B&C Alternator Wingtip strobes Strobe power supply strobe...
Since the Continental 0200 power charts that I have seen stop at 2750 rpm which is rated at 100hp at about 29" MP, I have been looking for a simple way to...
Hello Paul: If you can give me all of the 0-200 spec's I can put it into Desktop Dyno. It gives a report of the info your looking for. Info I would need are: ...
I don't know where to get the info on carb cfm, valve size, or cam spec's Thanks for the offer, if I come across those spec's I will submit them to you. Paul ...
I am looking for O-200 rod and main bearings (saddle) standard, not oversized. If anyone has a bargain offer, great, but retail quotes please stand off. Thank...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
