Hi All My Airfer Bi max was taken from my Truck on Saturday morning November 3rd The cage was not taken only the Frame and motor. If anyone hears of one for...
Yes its off of our site now we only have one demo unit left its a black devil with size 30 wing Ashton B Sent via BlackBerry from T-Mobile ... From:...
I recently read about the "flat top" gun trigger style throttle. I have a FB std throttle which seems to fit me rather awkwardly. Does anyone have info or a...
The FB is an excellant machine. One wonders why the throttle is not better designed? It's long and can get easily tangled in the lines. Has anyone cutoff the...
I put one of the flat top throttle on my FB simo 122 and liked it a lot. Worked good, better than the sock one which I never likes. You may want to get another...
On one half of my prop (scimitar) on a FB the hub area is crushing in, both in the front and back and only on the one blade. It seems that the bad half...
Rick, I have one of those props on my machine and I don't have that problem. Unless you've gone crazy with tightening it, I would think it should be warranted....
... John I'll give you a call, but how can I resurface the outside of the blade hub where it contacts the drive. A filler or epoxy? Thanks everyone, Rick ... ...
I had this happen on 2 sets of MAH props. The first set failed on the first flight and took out the exhaust system and part of the frame. At the time I thought...
John, You are the MAN....After our phone conversation I decided to give the repairs a try ( couldn't wait to get the cd)....Everything went exactly as you said...
Eric, Looks great! I've used John's video for a long time and it has really given me great info to restore broken props. One of these days I will buy his...
Lake Havasu ,Arizona is hosting "Western Winter Blast" 4 nights of Pyrotechnics (Fireworks) like you have never seen before. I have attended 6 years and am...
The Flyin's are over and if you broke a propeller, give me a call. I know the "Old Timers" have read this before, but for the Newer pilots out there, your...
I am making "Machined Billet Aluminum" propeller ballancer; http://groups.yahoo.com/group/PropellerRepair/spnew The 1 inch hub $22.00 The 20mm FB hub $22.00 ...
Winter Balast is over. It was 4 evenings of the most spectular fireworks set to to Music. Each night there was a full hour of lighting up the sky..and...
Hi all After a little tip damage to my carbon fiber 3 bladed prop, which I have been able to repair the tips okay, I am asking if anyone has a good method or...
Brent Do you have a rock guard to help protect your prop? How do you think the tip was damaged? Could ithe prop have sucked up an empty Fosters tin laying on...
Hi Jerry The tip damage was done by a single line from the wing dropping onto the prop while doing a forward launch, which unfortunately went wrong. (with no...
My method for balancing a 3 bladed prop is to use your repair method to simply add weight to the lighter side(s). Super glue and baking soda works well. I...
Hi all Well after a few little tips from John, all is good again as the prop is now nicely balanced and working a treat, a big thanks for the tips and help...
I DISAGREE hanging the prop by the center hub and measuring the difference in tip differental is much more accurate than a bubble. From center to tip is usualy...
