... My apolgies, it seems that for some reason Yahoo Groups had my settings for this group set to 'Special Notices' only, which isn't a setting I would have...
All understood. I know Yahoo does some strange things from time to time, and special notices are usually reserved for those who don't want to receive all...
... Hi Clint, to answer your questions and, hopefully, clarify some of the issues, here's what is happening... Before I installed SpectraVue (the SDR-IQ...
... An update... I uninstalled SpectraVue, checked all leads and connections and set up Spectrum Labs. Success (well, nearly) the Navigator works and I'm ...
Dave, Just a thought - do you have enough USB power for both Navigator and SDR-IQ? Simon Brown, HB9DRV www.ham-radio-deluxe.com ... From: "Dave Ackrill"...
Just for the hell of it remove the SDR-IQ. There is a PC chipset which is feeble in the USB area, can't remember what it is but I actually have it in my...
... Now that I've found out which program to start 1st, they both seem to be working OK now. However, I now need to get used to both systems and sort out the ...
Hi Dave Thanks for your answers. Here are a couple of more questions. 1) Do any of the Navigator com ports still work? For example, if you issue a PTT through...
... Thanks Clint, screen shots on their way to you. I've not yet attempted to send a PTT command to the Navigator as I've been trying to get the audio receive...
... Just checked and DM780 is able to key my TS2000X and I can see RF going out through the power meter (AV-1000 external to the TS2000X) and I can monitor the...
Using IC-749 and HRD build 2055 + DM 780. This has worked before, but I have not used digital, mostly PSK-31 for a while. I can not transmit. In the DM-780...
... Once again, I spoke too soon. Now SpectraVue has stopped working with the SDR-IQ. It says that the 'USB is not connected' when it is. I've tried...
Dave, This sounds very much like a USB power issue. What's the OS? With XP / VISTA / 7 you can see (somewhere) how much power the USB devices are drawing and ...
Clint, I just bought an Icom 7600. My navigator came with a cable for the Icom 756 Pro. Will this cable work with the Icom? Also be prepared as I may have to...
Normally, a USB port can supply 500 mA. You can check the power demands on any USB port in Windows XP by right-clicking My Computer and choosing Properties,...
Hi Bill Your IC756 cable will work FB with the 7600 - no changes required. Clint ... From: Bill To: NAVIGATOR-Interface@yahoogroups.com Sent: Wednesday, June...
... From: "Stephen Cannon" <sugar_bears_home@...> ... On the PC I'm using here there's a chip set which just can't provide even 500ma across all four USB...
Hi Simon - I agree, this does sound like a loading issue to me as well. The Navigator draws 140 ma from the USB. When the Navigator Hub is being enumerated,...
Good evening everyone..... I'm trying to get some feedback on PSK settings on my K3. From reading a couple of other forums and reflectors, it seems the general...
It is my understanduing that no bars shud be sghowing in alc meter for a clean signal! ... From: kb1kox To: NAVIGATOR-Interface@yahoogroups.com Sent: Wed, 3...
Hi Neil Here is how I run my Navigator with K3. I run everything in AFSK A mode instead of Data A. The reason is that when I switch modes between psk and...
The K3 is different from other rigs in that the audio S/N is checked by the K3 in data modes and the three bars really does give the cleanest signal. Clint ...
Thanks Clint!! That is where I have it set at now.... 3 bars of ALC, with 30w out via K3 power knob, and the navigator out level set at about 65 %. The K3 has...
Neil I had to go through the same "re-learning" curve, but really appreciate the work that Eric and Lyle have put into the data modes. Clint ... From: kb1kox ...
... I'll have a look out for that. I've downloaded the latest FDTI drivers, and that seems to have helped a bit. I can now at least 'see' the 28MHz output of a...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
