Thanks Simon, got it sorted. It's now using COM3 via CAT, but in another post that I didn't pull up on my initial search before I posted here, I found the...
Hi Clint, rrr .. Should have been a bit more clear. The Navigator is now working well in ASFK RTTY using DM780 and with MMTTY it's running very smoothly on...
Hello: I've just built a new computer and I'm getting everything transfered over. The new computer is running Windows Vista 64 bit. The rig is a Yaesu FT-950....
When sending CW the radio goes into transmit and the winkeyer keys but mu what metter says no power is being transmitted and turning the RF output on the...
HI Bill Check to see that your transceiver is actually in CW or CWR mode. MixW can fool you if you select CW mode, but the mode was not changed from USB. The...
I was wondering if U.S Interface was going to have a booth at Dayton again this year. I don't see one listed on the Hamvention web site. I've been considering...
Hi Scott We will not be at Dayton this year. Glenn and I had discussed it earlier in the year, and decided not to attend the Hamvention this year. And with...
Thanks Clint, I really appreciate the quick response. A friend of mine and I were hoping you would be there but I can fully understand why you won't be...
In case anyone is interested the Navigator runs on Windows 7 build 7100. Installation procedure needs documenting though - but anyway it's running fine on my...
Same over here - seems to work fine but I haven't extensively tested it yet. Windows 7 is very much a "play" thing for me at the moment. 2009/5/5 Simon...
Hi All, I have everything working rather well with the Navigator & FT-2000/D now and have just aquired an FT-1000/MP. From everything iv'e read (Cable Wise)...
You can not run two radios from one Navigator at the same time. But there are options when you have two radios in the shack. Your choices are: 1) Use a DB25...
Hello to the group! I just received my Navagator, and am impressed by what I see. When I joined this Yahoo! group, the form asked why I wanted to be here. I ...
Hi folks, I can support Clint's first proposal as I got me an old 25pin 4x switchbox from ebay and can now instantly switch between my rigs; a couple of cables...
Hi Clint, All, Tnx for the Ideas. I had an offer on some equipment that I had on eHam today, so it looks like there will be 2x FT-1000MP's and the Ft-2000D. I...
Has anybody had any luck using the TS2000 and the Navigator for APRS (particularly digipeating)? What settings or command file did yo use? Any help would be...
Howdy!, Could you give a little more info on what you're looking for? (30m packet, satellites, etc.). I'd guess 2m APRS, where you might be better staying...
Hi All, Just thought I'd share this with you all. Today I "sucessfully" upgraded my FT-2000/D using the Navigator & CT-119 Cable. Total UPG Time: EDSP + CPU =...
My new Pentium Dual Core CPU Windows XP computer did not come with any serial ports. I have not been unable to integrate my US Interface Navigator to my...
Hi Ron Where is the installation stopping? Were you able to load the drivers? Remember that the Navigator should not be plugged into the USB during the time...
My friend and I both have Navigator interfaces and FT2000Ds. The Navigator already has the CAT connection for the EDSP install, and an auxillary RS232 port for...
I have posted this on the FT-950 Board with no response so i thought i would try here. I am using the navigator with a Yaesu ft-950. After several earlier...
1) In DM780 select Navigator from the Tools menu and note the COM port assigned to the Navigator PTT CW Squelch. 2) In DM780 Program Options select PTT. 3) In...
Many thanks to simon for his help. Following the steps below i was able to get things working this afternoon and can now enjoy playing wiht my navigator and...
I did not have to... All is running fine here ED NX7TT Idaho Falls, Id ... From: Simon (HB9DRV) <simon.brown@...> Subject: Re: [NAVIGATOR-Interface]...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
