Hi everyone, For some reason I had menu item 85 - TUNER/ATAS selected which for some very strange reason was stopping me selecting that I had a CAT device...
I'm a new owner of the Navigator and have been able to get the installation and reconfiguration of ports done just fine on my Win2KPro machine. MixW setup...
Tom, The software your using, digipan, I believe doesn't have rig control. If you want a software program that does it all, try Ham Radio Deluxe/Digital...
Tom and Robert The original version of Digipan did not support CAT, but the latest version of Digipan does support CAT for Icom devices. The Digipan setup for...
Clint, Tnx for the info. I was afraid that was going to be the verdict. Operationally, the PSK programs are very different for the various programs, in my...
Hi, just purchased a navagator...it should have shipped already... looking forward to it getting here. Have a FT950...just got it not long ago also... ...
Hi Ed, I received my FT-950 cable today - watching 80m PSK at the moment, seems to just bop along like a good 'un. You'll need to increase the audio level -...
I have gotten my Navi set up so that it seems to work with the various PSK programs. The pgm that I have used most often and can use as my reference is...
********************************************************************************************************************************* set sample rate at 1200 ... ...
Hi Tom Bob is right - the sample rate for Digipan should be set to 12000. The 11025 setting will produce offsets between TX and RX on the order of 10 - 30 Hz....
Help! I have a new Navigator interface. I need help with the setup. Hardware & Software = IC-706mkIIg, Navigator disk version 2.4.11 HRD version 4.1, build...
Sorry for the slightly off topic item. I figured this was the fastest way to get an answer. I know the are a few guys with a similar configuration. I have the...
Hello Dick It sounds like your IC706MkIIG is not in "straight key" mode. Your CW Paddle option should be "OFF". When operating with WinKeyer, all paddle...
Good evening to the group... I have been using the Navigator for the better part of a year now and it has work flawlessly with every soundcard program "except"...
Clint, Thanks for the reply. Well, duh, why didn't I think to turn off the IC706 keyer. Yes, that fixed that problem. You know what happens when you do you a...
Hi Dick - glad the straight key did the trick. Now to you other questions: 1. In DM780 to use keyboard to CW, you have to click on the Send(F1) button then...
If I could only get them to work. It does not seem to increment in the window. I have to keep adding them. And the auto add to the log does not work either. ...
Clint, Thanks again for your help. I understand all your comments in last email (attached below) and feel confident that I have all those items setup...
I originally posted a request for help on this reflector on Feb. 13 regarding my new Navigator interface setup problem. See the original posting attached at...
Using a Navigator into the TenTec Orion II accessory socket.... the audio drive level seems to be low. I have the navigator RF out control at max and the...
... Go into the NavOptions program for the Navigator and ensure that the audio level is not set to attenuate -20db. Sometimes it defaults to this for some...
Thanks Roger, yes I did that. I just noticed I seem to get more output on 80M, 40M than on 20M. With PSK, never makes it above 80W on 20. Of course some...
Hello Jim According to the Orion manual, there is a level control for the Aux In function (pin 1) of the AUX connector. Does changing this level help with...
Yes I have the Orion Aux level set at maximum. But the Orion RF output level reduction only appears to happen on 20M, maybe higher, so I will check other...
Since I am away from my unit.. Was asked what was the weight of the unit and could not answer. Just used it like a madman on the DXpedition to PJ5/PJ6/PJ7 ...
Hi...I have a new Navigator coming on Friday. I will install it on my 3.2Ghz computer using XP Pro SP3. Installed there now is a RigExpert SD. My question is...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
