... I'm ... out ... escutcheon. ... Excuse me for being off-topic, but couldn't resist; here's my 2-cents worth about Ham gears' front and rear panels. The...
Hi Clint and Darin, You're right, Clint.? Let me tell you that I get pretty serious about CW contesting.? In my setup. I use the Navigator K1EL module only for...
Hi Clint, I followed the instructions to the letter...sorry to say didn't work, same old same old error 39, both the bus and port drivers seem to install...
Hi, I'm setting up Navigator at the clubstation of Icelandic Radio Amateurs, TF3IRA/TF3W. While setting up Menu 8-6, I can't get Transmit Carrier below...
I'm having a heck of a time getting N1MM to work, in the CW mode, with the Navigator. N1MM should be able to send CW out as long as the radio is in the CW mode...
First off, I have been using my Navigator with WinXP, DM780 and an IC- 7000 for a year without problems. It's now time to move it to my 6 month old Vista 64...
Hi Matt In the Files section of this reflector is a .zip file with the 2.4.10 driver. When you download this, and unzip it to a folder, you will see a read me...
Hi Terry The problem is most likely that your rig requires the PTT to be activated when you are in CW. In the Files section of this reflector is "CW PTT.pdf"...
Hi Terry If your FT950 doesn't need to have PTT generated when in CW, then the earlier suggestion I gave you would not solve the problem. Have you tried other...
Hi Terry I downloaded the FT-950 manual from the web and see that your rig does not require PTT to be activated to send CW, so my first suggestion can be...
Hi Clint. Thanks a lot for the help. BTW you can delete my double post - sorry. Well, after a lot of playing around I get the radio to TX with power, and the...
Hi Terry The difference between DM780 and N1MM is that DM780 has a built in WinKey configurer, and N1MM does not. It only changes a few of the WinKey items,...
Thanks much for that Clint. In the config / hardware tab of N1MM there is a checkbox for Winkey in the com port settings. Should this be checked? Also, when...
Hi Terry - yes, on the COM port for your Navigator WinKey controller you should check the WinKey item in the "SET" screen. See the Files item "N1MM Setup...
Finally got the 950, Navigator and N1MM to TX cw. Your JPEGs in the files section helped a lot. Thanks again Clint and Happy Holidays. Terry / K8TJM ... that ...
Hello I'm considering purchasing a Navigator to use with a Yaesu FT-847. So far I've tried a couple of other interfaces but it seems like when I want to change...
Don, That is the setup which I currently have, and so far I like it quite much. I'm just in the "learning curve" phase and so far I am unable to determine how...
Hi Jim RE: your desire to monitor the Navigator USB Audio Codec on your PC speakers. What you need is a program that can specify the USB Audio Codec as an...
Clint, Thanks for the suggestions. Il look up that VAC & Repeater. Meanwhile, I'm using HRD & DM780 v4.0 SP1 build 1848. I have not yet attempted MixW even...
Hi Jim When you installed your software on your computer, a copy of all of the manuals was saved on your computer hard drive. Go to My Computer, and click on...
Hello: I have set my K3 to Data A; line-in;etc. and I hear the data(PSK31)on the Navigator speaker, BUT I'm keying the K3. Which USB port should be keyed and...
Hi Tom There are 6 USB Uart channels on the Navigator. Check your Windows Device Manager to see which COM ports are assigned to these channels. When you...
Hello all, I have a curious problem that I suspect is something I have wrong in my set-up. I can receive PSK using the Navigator, the K3 and DM780. ...
Hi Tad - looks like the problem is incorrect selection of the audio device. Under Configure \ Sound Card Type should be "Computer Soundcard" Input should be...
Hi Group I have recently been given a PK232 and wonder if anyone has interfaced it with the Navigator. What advantages would it give and is it in fact a viable...
I think this would be a redundant effort....or a waste of time. The Navigator works a lot better with the right piece of software than the old pk-232. ...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
