Hi Guys, Just received one of the first in Europe. Following the instructions it set up first time in a very short period. The item which took the most time...
Hi Guys, I have cables for both my TS850 and IC706 and will occasionally swap over. A question, "if" I were to forget to change the rig setup in the software ...
Be careful that you are using the right interface cable when you plug it into your transceiver. In a recent posting, Roger – G4BVY asked about risks when...
Warning: damage can result if you plug the wrong cable into a rig. See posting "Multiple Rigs Multiple Cables". ... over. ... software ... output/ ... Roger,...
After setting up my com ports as per the Navigator installation, when I go to Mix W and try to set PTT or CAT ports it tells me they are in use. Am I missing...
Hello Roger, I would do the following: 1.Purchase a DB-25 (RS-232) A/B switchbox and plug both transceiver cables into it. Make SURE that the RS-232 switchbox...
I picked up a Navigator on US Navigator's second US shipment, so I suppose that makes me one of the early users. As some of you know, I am active on all of...
... See my earlier post from today. To get transmit audio go into the NavOptions program and set it to NORMAL from Minus 15DB. Then go into MixW and put the...
The complete manual set for the NAVIGATOR Interface and the IMD Meter by kk7uq are now available for download at: www.usinterface.com or www.imdmeter.com As...
Hi Glen, Many thanks for the two replies. My intent is that the two cables remain attached to their respective rigs, and that I just swap (or switch as you...
Just recieved and set up my new navigator can get UI-view to recieve through it but won't transmit or hold the ppt open all the time so I have to turn off the...
... It is available at ui-view.org it is free and the only aprs program I can find. MAybe it is the AGWPE program causing the problem, UI-view need AGWPE to...
... Hi Keith PTT for sound card modes is controlled by the RTS line in the "PTT CONTROL" port of Navigator. You will need to supply AGWPE with the port number...
My Navigator arrived today, and Glenn walked me throught the installation. The main difference between what I had (a RigExpect Tiny) and the Navigator is night...
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the NAVIGATOR-Interface group. File :...
NAVIGATOR-Interface@y...
Mar 16, 2007 12:09 am
135
Hi guys If you are looking for other software to play with using the Navigator then check out my software page from time to time. I keep, or have links to most...
I had a nice conversation with Glenn re multiple rigs... one thing leads to another.... I presently use a Delta 44 sound card for my amateur needs - what is...
Thanks I am begining to think that uiview and agwp does not know how to handle virtual comm ports but if you have any ideas it would be helpful, It holds my...
Good Morning, I'm happy to report my Navigator arrived Saturday March 17th. What a pleasant surprised as delivery was not promised till the 25th! I'm happy to...
Hi guys I posted a pdf file into our files area concerning the use of the Navigator as a controller for Echolink which is a voip internet radio system. There...
I have been a very successful user of the Navigator interface. One cool thing about the Navigator as an interface is that it is very easy to set things up so...
Got uiview working with my TS-2000 finally, found a .cmd file for the TS-2000 on the ui view website, I set ui view to com 8 (cat control) without running...
I made a start today to install my Navigator interface and after getting so far have run into a problem which I hope someone can help me with. I am running a...
... Hi Charlie - it looks like the "pair" assignments are backwards. When you look at the set of COM ports in Device Manager, you will see the same name...
Hey Glenn and everyone, I got the box the other day and hooked it up without a hitch. Using it with 3 different programs (MixW, Digipan and PropNet PSK)....
Hi Vincent Sorry I chopped your request, but it was because I thought I had the solution within the IC706 Menu commands. In any event the early versions before...
... Yes you can as long as you have the software to do that. The Navigator will simply feed out to the tx what you feed in whether that be data tones or...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
