Can anyone confirm the following situation, seen here: When using Winkey with N1MM, using the Winkey's PTT line to key the radio (no VOX), the first element...
No problem with me Pete, every thing goes out without delay. V 4.0.60 Jos on4kj ... From: Pete Smith To: N1MMLogger@yahoogroups.com Sent: Thursday, July 01,...
... Jos, please double-check. Each of the variables I mentioned is critical. In particular, you must have your transceiver running pure PTT (no vox) and be...
hello again all. I upgraded my N1MM to the latest version and everything seems to be working fine except now, when I use telnet to telnet into a cluster, the...
Hallo Jack, click right in the packet window and check the "allow xxx" entries you wish to see on your bandmap, e.g. Allow HF / Allow VHF/ Allow WARC. Got the...
Right click on the packet window, check the filters. Check the packet timeout. Check the time on the title bar of the log window. 73, Tom ... From: k4sac...
OM7ZZ used N1MM Logger to demo his new USB interface at Friedrichshafen last weekend. Response was very positive to both the hardware and the software! ...
My TRLog Model 2 CW interface has worked fine with N1MM, but I recall that the Model 3 with integral paddle support has not been supported by N1MM in the past....
The logging program does not support paddles, and likely will never support paddles. The single hardest piece of code to write in this program has been the...
Just starting to set the N1MM program up, After entering the Latitude it will not accept it comes up with "Invalid Latitude renter", My Lat/Long:- 49.08.15...
On Fri, 2 Jul 2004, Ronald A. Stunden wrote: -> Just starting to set the N1MM program up, After entering the Latitude it -> will not accept it comes up with...
I agree with Dallas' observation. In the RAC contest I had nothing else running, no telnet or packet, but still got the stutter when I used the ' key to send...
Your latitude should be entered as 49.14 and Long. 123.11 Assuming that 49.08.15 is 49 degrees 8 minutes and 15 seconds. 73, Tom, W1TO "Ronald A. Stunden"...
The Winkey solution is really a FB solution, Paddle support is built in and will interrupt output with a single dit or dah. It also is not prone to any...
Tom, I just read something about Joseph's USB-interface ! Do u have any news about it ? I just tested CW with latest version and until now it doesn't work on...
We just started using N1MM logger this field day and it was great at the HF stations. We just couldn't get the VHF bands to come up using manual entry only....
I used TR for years without the paddle support. Use your existing keyer. On an MP there are two key jacks. For a single key jack you probably need isolation...
You don't need a paddle interface, true. And I don't think you need any isolation, either - I am using a simple Y-connector to connect the computer keying line...
We had no problems with VHF and it was done manually. The trick is that you type in the frequency (in KHz) into the call field. Then you type in the mode. ...
Is there a review of super check partial files? Now that I understand that there are many, I'm wondering what differences there are between versions. Thanks ...
Until now, with V4.0.61, I am still not able to fill the running station's bandmaps from the mult PC. Local spots don't go through the network, while...
Franki @ ON5ZO.be
franki@...
Jul 3, 2004 7:02 pm
17656
Hello ! Just running the VHFREG1 module during the contest and setup runs very well ! Just one little info: AUTO-CQ of my SSB-Wave-File on F1 does not work or...
Have Been running MMTTY sound card AFSK output via rigblaster to rig utilizing VOX for relay(comport not used for PTT). Just loaded N1MM and nothing...
Sorry for the bandwidth ! I just did search in the ALT&H but did not find that: Just push "ALT & R" to start/activate the Auto-CQ ! Where is that explained...
Total Time On/Off not correct in DL-DX RTTY. DL-DX RTTY - 2004-07-03 0000Z to 2004-07-04 0000Z - 157 QSOs WA4PGM - Off Times > 30 Minutes 2004-07-03 0000Z -...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
