I'm having the same problem here.  I just built a new 64-bit Windows 7 system. 
I'm running as administrator and have UAC disabled.  I installed the 9.0
FullInstaller and then the 9.12.4 update.  Installation appeared normal, but
when I try to run N1MM logger I get the "Unexpected error; quitting" message.

Has anyone successfully installed and run N1MM on a 64-bit Windows 7 system?  If
so, is there anything else I should be doing?

73,
Clay  W7CE


--- In N1MMLogger@yahoogroups.com, "ei9hq@..." <ei9hq@...> wrote:
>
>
>   HI ALL,
>           TNX TO ALL FOR INFO MOVED FROM XP TO WINDOWS 7 NEVER USED VISTA.
> TNX FOR TIP ON ADIF AND CABRILLO FILES .
>
>                            YOURS IN RADIO
>                            DECLAN EI9HQ
>
>
>
> Original Message:
> -----------------
> From: WILLIS COOKE wrcooke@...
> Date: Sat, 12 Dec 2009 14:16:08 -0800 (PST)
> To: N1MMLogger@yahoogroups.com
> Subject: Re: [N1MM] window7 and n1mm
>
>
> It is really no big deal unless you don't know you need to.  It is just a
> couple of clicks of the mouse!  The error message sounds really grim if you
> don't.  Also, when you make your ADIF or Cabrillo file be sure to tell it
> to put it in the Library file or it will hide it with the N1MM files and it
> is a pretty good search and pounce activity to find them.
>
>  Willis 'Cookie' Cooke
> K5EWJ
>
>
>
>
> ________________________________
> From: Gil rojomn Charter <rojomn@...>
> To: N1MMLogger@yahoogroups.com
> Sent: Sat, December 12, 2009 3:44:45 PM
> Subject: RE: [N1MM] window7 and n1mm
>
>
> That is why, if you are installed in Program Directory you do have to do
> it, although the install should have made sure it was done correctly. If
> you do not install there you simply have to log on with an administrator
> account during the install.
>
> Gil Rochester ,MN W0MN
> ICC and twitter WzeroMN
> 44.082036N 92.513219W 1050'
>
> -----Original Message-----
> From: N1MMLogger@yahoogro ups.com [mailto:N1MMLogger@yahoogro ups.com] On
> Behalf Of WILLIS COOKE
> Sent: Saturday, December 12, 2009 3:27 PM
> To: N1MMLogger@yahoogro ups.com
> Subject: Re: [N1MM] window7 and n1mm
>
> I am installed in the programs directory and yes you do have to do this.
>
> Willis 'Cookie' Cooke
> K5EWJ
>
> ____________ _________ _________ __
> From: Gil rojomn Charter <rojomn@charter. net>
> To: N1MMLogger@yahoogro ups.com
> Sent: Sat, December 12, 2009 1:38:08 PM
> Subject: RE: [N1MM] window7 and n1mm
>
> You do not have to do this if you do not install in the Program Files
> directory.
>
> Gil Rochester ,MN W0MN
> ICC and twitter WzeroMN
> 44.082036N 92.513219W 1050'
>
> -----Original Message-----
> From: N1MMLogger@yahoogro ups.com [mailto:N1MMLogger@ yahoogro ups.com] On
> Behalf Of WILLIS COOKE
> Sent: Saturday, December 12, 2009 1:24 PM
> To: N1MMLogger@yahoogro ups.com
> Subject: Re: [N1MM] window7 and n1mm
>
> You not only need to be logged in as admin but right click on the Icon then
> select run as administrator the first time you run the program after an
> update.  True for Windows 7 as well.
>
> Willis 'Cookie' Cooke
> K5EWJ
>
> ____________ _________ _________ __
> From: Gil rojomn Charter <rojomn@charter. net>
> To: N1MMLogger@yahoogro ups.com
> Sent: Sat, December 12, 2009 1:20:12 PM
> Subject: RE: [N1MM] window7 and n1mm
>
> I remember that message in early use of Vista. I think two solutions are
> possible. The best it to install in a directory (THEY OUGHT TO DEFAU< THIS
> WAY) that is NOTR p[art of the Program Files of any kind. Writing to these
> when you are not administrator is a problem.
>
> The second is to be sure you are logged as administrator when installing and
> first running.
>
> Gil Rochester ,MN W0MN
> ICC and twitter WzeroMN
> 44.082036N 92.513219W 1050'
>
> -----Original Message-----
> From: N1MMLogger@yahoogro ups.com [mailto:N1MMLogger@ yahoogro ups.com] On
> Behalf Of ei9hq@utvinternet. com
> Sent: Saturday, December 12, 2009 11:16 AM
> To: N1MMLogger@yahoogro ups.com
> Subject: [N1MM] window7 and n1mm
>
> HI ALL,
> NEW PC WITH WINDOWS 7 ON. DOWNLOADED V9 FIRST THEN V9.12.3 WHEN
> TO OPEN N1MM
> GOT MESSAGE UNEXPECTED ERROR;QUITTING ANY HELP WOULD BE GREAT. HAPPY XMAS
> TO ALL FROM DUBLIN.
>
> YOURS IN RADIO
> DECLAN EI9HQ
>
> ------------ --------- --------- --------- --------- --------- -
> myhosting.com - Premium MicrosoftR WindowsR and Linux web and application
> hosting - http://link. myhosting. com/myhosting
>
> ------------ --------- --------- ------
>
> To unsubscribe, send an email to:
> N1MMLogger-unsubscr ibe@yahoogroups. com
>
> Yahoo! Groups Links
>
> [Non-text portions of this message have been removed]
>
> ------------ --------- --------- ------
>
> To unsubscribe, send an email to:
> N1MMLogger-unsubscr ibe@yahoogroups. com
>
> Yahoo! Groups Links
>
> [Non-text portions of this message have been removed]
>
> ------------ --------- --------- ------
>
> To unsubscribe, send an email to:
> N1MMLogger-unsubscr ibe@yahoogroups. com
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> --------------------------------------------------------------------
> mail2web.com – Enhanced email for the mobile individual based on Microsoft®
> Exchange - http://link.mail2web.com/Personal/EnhancedEmail
>

I searched the help files and past messages but did not find anything on these
topics...

1) Example of say a QSO party where mults are by mode.  If I'm operating on CW
and I type in a legal mult (say Ohio QSO Party and I type in LUCA county), I
don't see anything in N1MM that tells me I need (or don't need) this mult on
SSB?  Is there something and I just don't know where to look or have some window
open?  Also, nothing says I could use this station for QSO on other bands.  I
didn't see any equivalent to NA/CT check call or check mult window either.

2) If one leaves the cursor in the text box for Exch and leaves this text box
(tab or space) and goes to another text box, when one returns to the exch text
box the entire field is highlighted.  Why not put the cursor back where it was
when the textbox was left?  (the call field remembers where the cursor was and
puts it back)

I notice that the receive number field acts this too (highlighting the entire
field).

Thanks, 73 Tim K9TM

Yes mine does it too with dual monitors, but I note that the similar
bandmap on the Logger32 does not have such a problem. I believe Logger32
is written in VB may be a later version of VB Studio?

David G3YYD

N1MM wrote:
> That's a bug in the libraries distributed for VB.  It will not be fixed.
>
> 73,
> Tom - N1MM
>
> ke5akl wrote:
>
>> Hi,
>>
>> Just a comment on a little bug in handling dual monitors.
>>
>> With primary monitor on left and secondary on right and Bandmap anywhere on
the secondary monitor, the little messages that pop up when you hover over a
spot appear at the right edge of the primary  monitor, not in the Bandmap. 
Everything works fine with the Bandmap displayed on the primary monitor.
>>
>> Thanks,
>>
>> Mike - ke5akl
>>
>>
>>
>> ------------------------------------
>>
>> To unsubscribe, send an email to:
>> N1MMLogger-unsubscribe@yahoogroups.com
>>
>> Yahoo! Groups Links
>>
>>
>>
>>
>>
>>
>
>
> ------------------------------------
>
> To unsubscribe, send an email to:
> N1MMLogger-unsubscribe@yahoogroups.com
>
> Yahoo! Groups Links
>
>
>
>


[Non-text portions of this message have been removed]

There are problems with the Yahoo search engine - have been for months.
Yesterday it was giving me no messages after February 2009 and it sounds
like it's worse now.  Try this, thanks to K3CT -- use Google and set up
your search like this: supported radios
site:groups.yahoo.com/group/n1mmlogger . The search term or terms must
go before the "site:" statement

73, Pete N4ZR
New Articles Daily - the Contesting Compendium at http://wiki.contesting.com
The World Contest Station Database, updated daily at www.conteststations.com
The Reverse Beacon Network at http://reversebeacon.net


On 12/15/2009 1:19 PM, objectiveuser wrote:
> I'm having great difficulty in searching this Yahoo group for past messages. 
I love the wonderful search engine used by Contestin.com wherein it comes up
with all hits on a search term or combination thereof.  In contrast, typing a
word or callsign such as N4TZ into the search box in this group comes up with
NONE of the messages posted by that person or in response to that inquiry.
>
> Is there any mechanism to find previously posted items among the thousands of
past messages?
>
> Terry Zivney, N4TZ
>
>
>
> ------------------------------------
>
> To unsubscribe, send an email to:
> N1MMLogger-unsubscribe@yahoogroups.com
>
> Yahoo! Groups Links
>
>
>
>
>

Try a google search of N4TZ site:groups.yahoo.com/group/n1mmlogger

Someone suggested this when yahoo groups search is broken.

73,
Tom - N1MM

objectiveuser wrote:
> I'm having great difficulty in searching this Yahoo group for past messages. 
I love the wonderful search engine used by Contestin.com wherein it comes up
with all hits on a search term or combination thereof.  In contrast, typing a
word or callsign such as N4TZ into the search box in this group comes up with
NONE of the messages posted by that person or in response to that inquiry.
>
> Is there any mechanism to find previously posted items among the thousands of
past messages?
>
> Terry Zivney, N4TZ
>
>
>
> ------------------------------------
>
> To unsubscribe, send an email to:
> N1MMLogger-unsubscribe@yahoogroups.com
>
> Yahoo! Groups Links
>
>
>
>
>

That's a bug in the libraries distributed for VB.  It will not be fixed.

73,
Tom - N1MM

ke5akl wrote:
> Hi,
>
> Just a comment on a little bug in handling dual monitors.
>
> With primary monitor on left and secondary on right and Bandmap anywhere on
the secondary monitor, the little messages that pop up when you hover over a
spot appear at the right edge of the primary  monitor, not in the Bandmap. 
Everything works fine with the Bandmap displayed on the primary monitor.
>
> Thanks,
>
> Mike - ke5akl
>
>
>
> ------------------------------------
>
> To unsubscribe, send an email to:
> N1MMLogger-unsubscribe@yahoogroups.com
>
> Yahoo! Groups Links
>
>
>
>
>

Mike,

Mine does the same thing - regardless of where I position the bandmap window in
the right-side monitor, the mouse-over text appears in the left-side monitor.

I believe this is a Microsoft/Windows  foundation bug - nothing application
programmers can do to fix it.

-larry
K8UT


From: ke5akl
Sent: Tuesday, December 15, 2009 12:32 PM
To: N1MMLogger@yahoogroups.com
Subject: [N1MM] Dual Monitor Bug?



Hi,

Just a comment on a little bug in handling dual monitors.

With primary monitor on left and secondary on right and Bandmap anywhere on the
secondary monitor, the little messages that pop up when you hover over a spot
appear at the right edge of the primary monitor, not in the Bandmap. Everything
works fine with the Bandmap displayed on the primary monitor.

Thanks,

Mike - ke5akl





[Non-text portions of this message have been removed]

This was discussed on the DXlabs reflector a while back.  IIRC the concensus
was that this is a windows artifact, and not something with the software.

Lee
KC4ART


--------------------------------------------------
From: "ke5akl" <ke5akl@...>
Sent: Tuesday, December 15, 2009 12:32 PM
To: <N1MMLogger@yahoogroups.com>
Subject: [N1MM] Dual Monitor Bug?

> Hi,
>
> Just a comment on a little bug in handling dual monitors.
>
> With primary monitor on left and secondary on right and Bandmap anywhere
> on the secondary monitor, the little messages that pop up when you hover
> over a spot appear at the right edge of the primary  monitor, not in the
> Bandmap.  Everything works fine with the Bandmap displayed on the primary
> monitor.
>
> Thanks,
>
> Mike - ke5akl
>
>
>
> ------------------------------------
>
> To unsubscribe, send an email to:
> N1MMLogger-unsubscribe@yahoogroups.com
>
> Yahoo! Groups Links
>
>
>

It is working fine here with 4 monitors and Bandspread on monitor 2. I would
check your video software/drivers

On Tue, Dec 15, 2009 at 12:32 PM, ke5akl <ke5akl@...> wrote:

>
>
> Hi,
>
> Just a comment on a little bug in handling dual monitors.
>
> With primary monitor on left and secondary on right and Bandmap anywhere on
> the secondary monitor, the little messages that pop up when you hover over a
> spot appear at the right edge of the primary monitor, not in the Bandmap.
> Everything works fine with the Bandmap displayed on the primary monitor.
>
> Thanks,
>
> Mike - ke5akl
>
>
>



--
Randy Lake N1KWF
73 Gunn Rd.
Keene,NH


[Non-text portions of this message have been removed]

There was a si8milar problem in DXLABS programs and it is a Windows control
rou7tine not fixable by the programmer. It may require new ex0ensive modules
or a wait for a fix if this is the case.

Gil Rochester ,MN W0MN
ICC and twitter WzeroMN
44.082036N 92.513219W 1050'



-----Original Message-----
From: N1MMLogger@yahoogroups.com [mailto:N1MMLogger@yahoogroups.com] On
Behalf Of ke5akl
Sent: Tuesday, December 15, 2009 11:33 AM
To: N1MMLogger@yahoogroups.com
Subject: [N1MM] Dual Monitor Bug?

Hi,

Just a comment on a little bug in handling dual monitors.

With primary monitor on left and secondary on right and Bandmap anywhere on
the secondary monitor, the little messages that pop up when you hover over a
spot appear at the right edge of the primary  monitor, not in the Bandmap.
Everything works fine with the Bandmap displayed on the primary monitor.

Thanks,

Mike - ke5akl



------------------------------------

To unsubscribe, send an email to:
N1MMLogger-unsubscribe@yahoogroups.com

Yahoo! Groups Links

I'm having great difficulty in searching this Yahoo group for past messages.  I
love the wonderful search engine used by Contestin.com wherein it comes up with
all hits on a search term or combination thereof.  In contrast, typing a word or
callsign such as N4TZ into the search box in this group comes up with NONE of
the messages posted by that person or in response to that inquiry.

Is there any mechanism to find previously posted items among the thousands of
past messages?

Terry Zivney, N4TZ

The update can be downloaded from:
http://www.pi4dec.nl/n1mm/RevisionHistory.htm

Each update includes all changes from 9.0.0 on. In general, you may
install earlier or later versions on top of one another. Bugs are fixed
only in the current version. Please confirm bugs in the current version.
Check the user group for late information on any issues with new versions.
Notes:
- If you installed 8.12.9, you don't need to download and install
V9.0.0. You already have everthing in the full installer.
- You may go back and forth between V8 and V9 versions. Just download
and install.
- Do not uninstall/reinstall. These versions are intended to be
reinstalled on top of each other.
- Make a backup of your install directory on a regular basis, especially
if upgrading from older versions!


73,
Tom - N1MM

Hi,

Just a comment on a little bug in handling dual monitors.

With primary monitor on left and secondary on right and Bandmap anywhere on the
secondary monitor, the little messages that pop up when you hover over a spot
appear at the right edge of the primary  monitor, not in the Bandmap. 
Everything works fine with the Bandmap displayed on the primary monitor.

Thanks,

Mike - ke5akl

Tom, did you use Tools-Save Window Positions after you placed the windows where
you wanted them?  This will put the desired windows and position in the INI file
so that the next time you open you will have them.  Also, if you temporarily
move, open or close some windows, the Restore Window Positions will put you back
in your preferred configuration with one command.

  Willis 'Cookie' Cooke
K5EWJ




________________________________
From: Tom Hammond <n0ss@...>
To: N1MMLogger@yahoogroups.com
Sent: Tue, December 15, 2009 10:32:51 AM
Subject: [N1MM] Re: Band map in CW SS displayed but never filled... WITH 
ANYTHING!


Hi Scott:

I sent a 'final' reply the other day but I don't believe it made it to the
reflector.

I was able to FIX the problem by blowing away my INI file and
restarting N1MM, allowing it to rebuild the INI file.  Apparently
there was something farkled in the INI that not only caused the Band
Map not to be populated (by ANY METHOD AVAILABLE TO ME), but to also
display the Available Mults window every time I restarted the
program, even though I had specifically removed Available Mults from
the screen before shutting the program down.

Thanks for your reply.

73,

Tom







[Non-text portions of this message have been removed]

Tom,

I presume this is in reply to:

> This may not be related, but at one point during the weekend, QSY stopped
putting calls on the bandmap, even though it was turned on. I had to restart
N1MM Logger, after which it worked normally.
>
> Scott K9MA

It sounds like a related problem, though I did not have to delete the .ini file.

Scott  K9MA


On Dec 15, 2009, at 10:32 AM, Tom Hammond wrote:

> Hi Scott:
>
> I sent a 'final' reply the other day but I don't believe it made it to the
> reflector.
>
> I was able to FIX the problem by blowing away my INI file and
> restarting N1MM, allowing it to rebuild the INI file. Apparently
> there was something farkled in the INI that not only caused the Band
> Map not to be populated (by ANY METHOD AVAILABLE TO ME), but to also
> display the Available Mults window every time I restarted the
> program, even though I had specifically removed Available Mults from
> the screen before shutting the program down.
>
> Thanks for your reply.
>
> 73,
>
> Tom



Scott Ellington
Madison, Wisconsin
USA

Hi,

I'm using N1MM with a Flex 5K and PowerSDR.  As I understand it, after tuning
with PowerSDR, focus should automatically return to the N1MM entry window. This
sometimes happens and sometimes doesn't.  Also, as far as I can tell at this
point, the behavior is not intermittent within a given session - i.e. after
starting up N1MM, focus either always returns to N1MM after tuning or it never
does.

The behavior when focus stays with PowerSDR is odd.  The focus indicator band at
the top of PowerSDR stays solidly on while the focus band at the top of the N1MM
entry window flashes 2 or 3 times then goes back to gray.  The vertical-line
cursor in the N1MM callsign entry appears and continues flashing regularly in
the normal manner but keystrokes go to PowerSDR only. Clicking on the N1MM
window returns focus to N1MM and keystrokes then go to the logger as is normal. 
To put this another way, it looks like N1MM wants to grab focus but can't quite
get there.

Can anyone explain what's going on and how to fix it?

Thanks,

Mike - ke5akl

Hi Scott:

I sent a 'final' reply the other day but I don't believe it made it to the
reflector.

I was able to FIX the problem by blowing away my INI file and
restarting N1MM, allowing it to rebuild the INI file.  Apparently
there was something farkled in the INI that not only caused the Band
Map not to be populated (by ANY METHOD AVAILABLE TO ME), but to also
display the Available Mults window every time I restarted the
program, even though I had specifically removed Available Mults from
the screen before shutting the program down.

Thanks for your reply.

73,

Tom

Hello,



Anyone that have this setup?



I need to know something about the cables to have all working properly.



Please give me an email to contact you.



Thanks in advance!



73,

Jorge

CX6VM/CW5W



[Non-text portions of this message have been removed]

Please help with a bit of configuration for using RTTY with my Flex 5000A. I
have all the other modes configured correctly.

I did a search on the group and the search engine seems to be broken.

In the main configuration screen (Configurer) should I check the digital com
port that corresponds to my Flex 5000A PTT? When I tried this my rig keyed
continuously. If I set up under RTTY Engine 1 TX, PTT&FSK to the PTT port then
it keys normally.

I do have the digital modes tab configured for two separate instances of MMTTY
with Soundcard and AFSK.

In MMTTY under setup MMVARI setup I do have the input and output set to the
appropriate Virtual Audio Cable ports. I also have RTTY Engine 1 set to the
correct audio ports.

Finally, the mark and space signal are about twice as wide as the railroad
tracks in RTTY Engine 1 and I can't properly tune or decode the signal.

All help is most welcome as I prepare for the upcoming RTTY contests.

73,

Mack de WB4MAK

Hi Paul,

Nice to see you here from time to time !

Say hi to the old gang for me.

I would add to what you have said by commenting that I added Uninterruptable
Power Supplies to all my rigs and computers.  (And even routers and DSL
modems, etc)

This adds another measure of safety to the system.

That said....N1MM does indeed rock !


73 de Gary, AA2IZ





----- Original Message -----
From: "Paul Mackanos - K2DB" <k2db@...>
To: <N1MMLogger@yahoogroups.com>
Sent: Monday, December 14, 2009 10:29 AM
Subject: [N1MM] Re: Lost my 10 Meter Log


>I just wanted to comment on this thread:
>
> Twice, yes twice in the last two contests at the K2NNY QTH, we
>
> ahd the computer crash from RFI problems, once during SS SSB
>
> Contest when we went to 15 meters to pick up Alaska for our
>
> Sweep, and once in the ARRL 160 CW contest. Both times it
>
> Was RF overload, both times, when N1MM came back up,
>
> All of the contacts in the log were there. This also happened
>
> During the CQWW CW DX contest at the W2FU multi-multi
>
> Station. I was on the 40 meter mult station, I hit the F2 key to
>
> Send the report, and BANG, the whole room shut down, 160,
>
> 80 & 40 meters, all rigs shut off, all computers went down.
>
> (Jeff W2FU was in the other room and turned on an electric
>
> Oven) He did not know it was on the same circuit hihi.
>
> Bottom line; we reset the breaker, all came back up, the network
>
> Came back up, and the contact was logged. All computers re-synced
>
> And away we go, back to contesting without a hic up.
>
>
>
> N1MM is the best, we have never, never lost a qso or a log with
>
> This program (like some others, which is why everyone here uses
>
> N1MM).
>
>
>
> Just my .02 cents worth.
>
>
>
> Paul K2DB
>
>
> 8
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> To unsubscribe, send an email to:
> N1MMLogger-unsubscribe@yahoogroups.com
>
> Yahoo! Groups Links
>
>
>
>

So I am finding out David.  I just wish I didn't have to find out during a
contest.  I was not trash mouthing N1MM, just looking for some help in finding
my lost contacts.  I got the help.  I found the contacts, but not till after the
contest.  On the bright side, it made me Run which I usually don't like to do
and I probably made more contacts in 10 hours of operating and 10 hours of
looking for my lost file than if I had spent 20 hours in S&P.  Besides, one of
my main objectives for this contest was to learn more about N1MM and Windows 7
and I sure did that.  There is a bright side to most everything but sometimes it
is hard for a curmudgeon to see it.

  Willis 'Cookie' Cooke
K5EWJ




________________________________
From: K1TTT <k1ttt@...>
To: N1MMLogger@yahoogroups.com
Sent: Mon, December 14, 2009 4:31:08 PM
Subject: RE: [N1MM] Lost my 10 Meter Log


It is not n1mm that is putting stuff under that hidden app data directory,
that is courtesy of the UAC feature of windows.  If you put those files in
your 'my documents' directory or somewhere else they will stay put and you
can use them directly.

David Robbins K1TTT
e-mail: mailto:k1ttt@...
web: http://www.k1ttt. net
AR-Cluster node: 145.69MHz or telnet://dxc. k1ttt.net



,___




[Non-text portions of this message have been removed]

Hi Pete,

Well, now I can't get the problem to occur...  However, I'm sure I was running
CW mode each time and, as well as I can recall, there was no error message from
N1MM.  Instead the window about sending a debug message to Microsoft would
appear and when that was closed N1MM would immediately shut down and disappear.

73,

Mike - ke5akl


--- In N1MMLogger@yahoogroups.com, Pete Smith <n4zr@...> wrote:
>
> What mode?  Any error message?
>
> 73, Pete N4ZR
> New Articles Daily - the Contesting Compendium at

It is not n1mm that is putting stuff under that hidden app data directory,
that is courtesy of the UAC feature of windows.  If you put those files in
your 'my documents' directory or somewhere else they will stay put and you
can use them directly.


David Robbins K1TTT
e-mail: mailto:k1ttt@...
web: http://www.k1ttt.net
AR-Cluster node: 145.69MHz or telnet://dxc.k1ttt.net


> -----Original Message-----
> From: WILLIS COOKE [mailto:wrcooke@...]
> Sent: Monday, December 14, 2009 01:03
> To: N1MMLogger@yahoogroups.com
> Subject: Re: [N1MM] Lost my 10 Meter Log
>
> I have figured out how to get my ADIF and Cabrillo files into my Documents
> Library which is convenient.  A problem with N1MM's method of putting
> files into the users directory is that the AppData directory is hidden so
> it is not easy to find.  For sure some understanding of the directory
> system is in order, but it is a daunting task for some of us, maybe all of
> us.  Maybe we will all get there, but in the middle of a contest is not a
> good time to find out that you don't know what is happening.  Fortunately
> my main goal for the 10 meter contest was to get a better handle on the
> features of N1MM, but I did not anticipate this problem and I still don't
> know what caused it or how to prevent it.
>
>  Willis 'Cookie' Cooke
> K5EWJ
>
>
>
>
> ________________________________
> From: K1TTT <k1ttt@...>
> To: N1MMLogger@yahoogroups.com
> Sent: Sun, December 13, 2009 4:35:34 PM
> Subject: RE: [N1MM] Lost my 10 Meter Log
>
>
> The 'proper' way is to install in program files but to create the
> databases
> and other user created files in the user's documents directory.  That is
> what the ms design expects.  This would do several things besides fixing
> the
> execution problems.  It would allow family members who share the computer
> to
> have their own setups and logs, it would separate all the program parts
> from
> the log files, Cabrillo and other output files making things easier to
> organize, it would allow use of the normal migration tools to make moving
> to
> new computers easier, and would allow easier backups of user data.
>
> David Robbins K1TTT
> e-mail: mailto:k1ttt@...
> web: http://www.k1ttt. net
> AR-Cluster node: 145.69MHz or telnet://dxc. k1ttt.net
>
>
> > -----Original Message-----
> > From: Gil rojomn Charter [mailto:rojomn@charter. net]
> > Sent: Sunday, December 13, 2009 21:29
> > To: N1MMLogger@yahoogro ups.com
> > Subject: RE: [N1MM] Lost my 10 Meter Log
> >
> > Most or all of these problems with Virtual Storage could be solved if
> the
> > program were not installed in Program Files (x86) but in its own
> > directory. Mine is C:\N1MM Logger. It would then not be a protected
> > directory and N1MM could write to it. I think it is time for the
> installer
> > to fix this.
> >
> > Gil Rochester ,MN W0MN
> > ICC and twitter WzeroMN
> > 44.082036N 92.513219W 1050'
> >
> >
> >
> >
> > -----Original Message-----
> > From: N1MMLogger@yahoogro ups.com [mailto:N1MMLogger@yahoogro ups.com]
> On
> > Behalf Of WILLIS COOKE
> > Sent: Sunday, December 13, 2009 2:20 PM
> > To: N1MMLogger@yahoogro ups.com
> > Subject: Re: [N1MM] Lost my 10 Meter Log
> >
> > I think I found the problem John.  N1MM put the log I created yesterday
> in
> > the C:\programFiles( x86)\N1MMlogger\ directory and the others in the
> > C:\users\Willis\ AppData\Local\ VirtualStore\ ProgramFiles(
> x86)\N1MMlogger
> > directory where I expected to find it.  The search utility did not find
> > the log in the program directory.  Now that I have found the data I will
> > need to figure out how it got there.  I sure am glad that Windows 7 has
> > cured all our Windows problems (G).  Thanks for your help.
> >
> > I don't know why my direct mail has not worked for you.  I have been
> CQing
> > intead of reading, so that may be the problem.
> >
> >  Willis 'Cookie' Cooke
> > K5EWJ
> >
> >
> >
> >
> > ____________ _________ _________ __
> > From: "John, K3CT" <k3ct@verizon. net>
> > To: N1MMLogger@yahoogro ups.com
> > Sent: Sun, December 13, 2009 1:07:14 PM
> > Subject: Re: [N1MM] Lost my 10 Meter Log
> >
> >
> >
> > Willis,
> >
> > Something is blocking your direct email.
> > Do you have more then on copy of N1MM on your computer? If so, do you
> > rename
> > the directories?
> >
> > John, K3CT
> >
> > ----- Original Message -----
> > From: "WILLIS COOKE" <wrcooke@yahoo. com>
> > To: <N1MMLogger@ yahoogro ups.com>
> > Sent: Sunday, December 13, 2009 12:10 PM
> > Subject: Re: [N1MM] Lost my 10 Meter Log
> >
> > > There was not one shown, but I created one in the data base in my
> effort
> > > to restore.  It is an empty data base at this time.  I shut down by
> > > clicking on the red X in the entry menu then replying yes to the pop
> up
> > > that resulted.  It may not be the best method, but I have been using
> it
> > > for three years and this is the first trouble with it.  I also used
> this
> > > computer for the Sweep Stakes Phone, CWQQ-CW and ARRL 160 with no
> > similar
> > > problem.
> > >
> > > Willis 'Cookie' Cooke
> > > K5EWJ
> > >
> > >
> > >
> > >
> > > ____________ _________ _________ __
> > > From: Pete Smith <n4zr@contesting. com>
> > > To: N1MMLogger@yahoogro ups.com
> > > Sent: Sun, December 13, 2009 10:41:46 AM
> > > Subject: Re: [N1MM] Lost my 10 Meter Log
> > >
> > >
> > > Cookie, take a look at the file dropdown menu - do you see ARRL10M
> shown
> > > there, at or near the top?
> > >
> > > What is your normal manner of shutting down?
> > >
> > > 73, Pete N4ZR
> > > New Articles Daily - the Contesting Compendium at http://wiki.
> > contesting.
> > > com
> > > The World Contest Station Database, updated daily at
> www.conteststations
> > > .com
> > > The Reverse Beacon Network at http://reversebeacon.net
> > >
> > > On 12/13/2009 9:34 AM, WILLIS COOKE wrote:
> > >> Last night I needed to use my regular logger for a while.  My N1MM
> had
> > >> worked well for Friday night and all day Saturday.  I had about 58
> > >> contacts logged.  I shut down N1MM in the normal manner like I have
> > done
> > >> during contests many times before, but this time when I started up
> N1MM
> > >> displayed my 160 meter contest contacts and I have not been able to
> > find
> > >> the 10 meter data.  I only have one data base because the computer is
> a
> > >> new one this year.  I uploaded the latest revision on N1MM on Friday
> > and
> > >> setting up the contest went normally as far as I could tell, as did
> the
> > >> contest before the shutdown.  Any ideas what I did wrong? How to get
> my
> > >> data back?
> > >>
> > >>   Willis 'Cookie' Cooke
> > >> K5EWJ
> > >>
> > >>
> > >>
> > >>
> > >>
> > >> [Non-text portions of this message have been removed]
> > >>
> > >>
> > >>
> > >> ------------ --------- --------- ------
> > >>
> > >> To unsubscribe, send an email to:
> > >> N1MMLogger-unsubscr ibe@yahoogroups. com
> > >>
> > >> Yahoo! Groups Links
> > >>
> > >>
> > >>
> > >>
> > >>
> > >
> > >
> > >
> > >
> > >
> > >
> > > [Non-text portions of this message have been removed]
> > >
> > >
> > >
> > > ------------ --------- --------- ------
> > >
> > > To unsubscribe, send an email to:
> > > N1MMLogger-unsubscr ibe@yahoogroups. com
> > >
> > > Yahoo! Groups Links
> > >
> > >
> > >
> >
> >
> >
> >
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
> > ------------ --------- --------- ------
> >
> > To unsubscribe, send an email to:
> > N1MMLogger-unsubscr ibe@yahoogroups. com
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> > ------------ --------- --------- ------
> >
> > To unsubscribe, send an email to:
> > N1MMLogger-unsubscr ibe@yahoogroups. com
> >
> > Yahoo! Groups Links
> >
> >
> >
>
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> To unsubscribe, send an email to:
> N1MMLogger-unsubscribe@yahoogroups.com
>
> Yahoo! Groups Links
>
>
>

No, it always starts from 'default' and doesn't save any settings at all...
it is a dumb test app just meant to exercise the functions of the ocx.


David Robbins K1TTT
e-mail: mailto:k1ttt@...
web: http://www.k1ttt.net
AR-Cluster node: 145.69MHz or telnet://dxc.k1ttt.net


> -----Original Message-----
> From: Ron Rossi [mailto:kk1l@...]
> Sent: Monday, December 14, 2009 16:25
> To: N1MMLogger@yahoogroups.com
> Subject: Re: [N1MM] Sounds
>
> Dave,
>
> Does your test app read the settings from N1MM and use them as the
> starting point of always start from "default"?
>
> I was thinking the other day that having a sound setup window that
> allowed configuration without having to try and figure out what options
> 1, 2, 3, or 4 really meant would be great. When I opened your test app I
> thought "Wow. This is pretty close to what I was just thinking about". I
> have only just brought up the test app this morning. But I am logged in
> remotely and cannot really play with it. I will try it this evening when
> I am home.
>
> By the way I am playing with the WaveTestApp because I have changed to
> yet another sound card in my logging computer and was running into a new
> set of strange results which I am trying to work through without
> bothering anyone. For example my webcam mic gets chosen as the QSO
> recording mic even if I select my SoundMax AUX input for this.
>
> I run WindowsXP Pro SP3.
>
> 73 es God Bless de KK1L...Ron Rossi (kk1l@...) <><
> QTH: Jericho, Vermont
> My page: http://home.comcast.net/~kk1l
>
>
>
> K1TTT wrote:
> >
> > If you are still having problems download this:
> > http://www.k1ttt.net/n1mm/n1mmwavetestapp.zip
> > <http://www.k1ttt.net/n1mm/n1mmwavetestapp.zip>
> >
> > Unzip it and put the exe file in your n1mm directory. Run it with the
> > original ocx and send me a snapshot of the report that it generates
> > when you
> > hit the 'report' button. and add a note about what version of the ocx is
> > displayed just to the left of the report button. Then install the
> > vista ocx
> > and repeat, send the snapshot of the report and what version of the ocx
> is
> > displayed.
> >
> > David Robbins K1TTT
> > e-mail: mailto:k1ttt@... <mailto:k1ttt%40arrl.net>
> > web: http://www.k1ttt.net <http://www.k1ttt.net>
> > AR-Cluster node: 145.69MHz or telnet://dxc.k1ttt.net
> > <telnet://dxc.k1ttt.net>
> >
> >
> > -----Original Message-----
> > From: K1TTT [mailto:K1TTT@... <mailto:K1TTT%40ARRL.NET>]
> > Sent: Sunday, December 06, 2009 15:42
> > To: N1MMLogger@yahoogroups.com <mailto:N1MMLogger%40yahoogroups.com>
> > Subject: RE: RE: RE: [N1MM] Sounds
> >
> > Yes, has been working fine here on vista for quite a while. I haven't
> > heard
> > any complaints from other win-7 users yet, but maybe there aren't
> > enough out
> > there yet. I'm getting ready now to order up a couple brand new win7
> boxes
> > to replace some older machines here so I should be able to do my own
> > testing
> > shortly.
> >
> > David Robbins K1TTT
> > e-mail: mailto:k1ttt@... <mailto:k1ttt%40arrl.net>
> > web: http://www.k1ttt.net <http://www.k1ttt.net>
> > AR-Cluster node: 145.69MHz or telnet://dxc.k1ttt.net
> > <telnet://dxc.k1ttt.net>
> >
> >
> > -----Original Message-----
> > From: Gil rojomn Charter [mailto:rojomn@...
> > <mailto:rojomn%40charter.net>]
> > Sent: Sunday, December 06, 2009 13:55
> > To: k1ttt@... <mailto:k1ttt%40arrl.net>; AA/N1MM
> > Subject: FW: RE: RE: [N1MM] Sounds
> >
> > Has anything come of this? Have you found a way to send SSB messages
> > (Recoding not needed) with anything other than the default card?
> >
> > Gil Rochester ,MN W0MN
> >
> > ICC and twitter WzeroMN
> >
> > 44.082036N 92.513219W 1050'
> >
> > From: Gil rojomn Charter [mailto:rojomn@...
> > <mailto:rojomn%40charter.net>]
> > Sent: Thursday, December 03, 2009 12:23 PM
> > To: 'k1ttt@... <mailto:%27k1ttt%40arrl.net>'
> > Subject: RE: RE: RE: [N1MM] Sounds
> >
> > Did you read these lines. I think they tell what you ask
> >
> > Old
> >
> > This is shot 003 and 008. When Microphone is selected then input shows
> > microphone. Anything else it shows Blank.
> >
> > New
> >
> > This is shot 005 and 009. When Default is selected there is nothing. Any
> > other selection for card gives microphone on input selection.
> >
> > Gil Rochester ,MN W0MN
> >
> > ICC and twitter WzeroMN
> >
> > 44.082036N 92.513219W 1050'
> >
> > From: David Robbins [mailto:k1ttt@...
> > <mailto:k1ttt%40verizon.net>]
> > Sent: Thursday, December 03, 2009 10:25 AM
> > To: rojomn@... <mailto:rojomn%40charter.net>
> > Subject: Re: RE: RE: [N1MM] Sounds
> >
> > ok, so which is which? and i want to see what is in the input port
> select
> > list for each configuration, that is important to see if the ocx is
> > working
> > correctly.
> >
> > and what is that radio codec selection? what type of radio are you
> > using or
> > is that something from a microkeyer or some other interface?
> >
> > Dec 3, 2009 07:32:43 AM, rojomn@...
> > <mailto:rojomn%40charter.net> wrote:
> >
> > Gil Rochester ,MN W0MN
> >
> > ICC and twitter WzeroMN
> >
> > 44.082036N 92.513219W 1050'
> >
> > From: David Robbins [mailto:k1ttt@...
> > <mailto:k1ttt%40verizon.net>]
> > Sent: Wednesday, December 02, 2009 11:33 AM
> > To: rojomn@... <mailto:rojomn%40charter.net>
> > Subject: Re: RE: [N1MM] Sounds
> >
> > ok, one of the screen shots is interesting. i don't care what mmvari
> > shows,
> > nor do i care what you select for the top box where the so2r options
> are.
> > what i need to see are:
> >
> > with the old ocx:
> >
> > 1. the device select list box where it shows the cards
> >
> > 2. what shows up in the input list box when you select each of the
> > cards in
> > the device list
> >
> > This is shot 003 and 008. When Microphone is selected then input shows
> > microphone. Anything else it shows Blank.
> >
> > with the new ocx:
> >
> > 1. the device select list box where it shows the cards
> >
> > 2. what shows up in the input list box when you select each of the
> > cards in
> > the device list
> >
> > This is shot 005 and 009. When Default is selected there is nothing. Any
> > other selection for card gives microphone on input selection.
> >
> > Shot 007 shows that the offered directory when installing new ocx is
> > wrong.
> > This is after an uninstall of the old ocx which is required before it
> will
> > actually install the new one. It will not overlay it but offers to
> repair
> > it. Repair just leaves the old one.
> >
> > Dec 2, 2009 06:41:05 AM, rojomn@...
> > <mailto:rojomn%40charter.net> wrote:
> >
> > SORRY, forgot the attachments so here is repeat with attachments.
> >
> > I did the checks and am sending attached screen shots. You will see that
> > MMVARI works fine. It transmits the digital signal and that proves that
> he
> > sound card works. I am trying to use the same card for SSB wav
> > transmission.
> > When I try to do it I get the radio keyed , no error reported, BUT,
> sound
> > does not play.
> >
> > I don't know what else to do at this point. Your ocx is the one and only
> > only that is installed. I did the search.
> >
> > MMVARI ocx works so it is possible.
> >
> > The sound cards on the machine are the one on the motherboard conexant
> > and a
> > USB card. The on board is the one I am trying to use and the USB is set
> as
> > the windows default.
> >
> > Gil Rochester ,MN W0MN
> > ICC and twitter WzeroMN
> > 44.082036N 92.513219W 1050'
> >
> > SNIP SNIP getting too long.
> >
> > [Non-text portions of this message have been removed]
> >
> >
>
>
> ------------------------------------
>
> To unsubscribe, send an email to:
> N1MMLogger-unsubscribe@yahoogroups.com
>
> Yahoo! Groups Links
>
>
>

Hi Mark:

It is the same thing for the Green Heron RT-20. I believe there is a thrid party
application called LP-ROTOR, which does what you want. I am sure the experts may
have better infromation for you.


73

Rich, AJ3G




________________________________
From: Mark n2qt <n2qt@...>
To: N1MMLogger@yahoogroups.com
Sent: Mon, December 14, 2009 3:20:44 PM
Subject: [N1MM] N1MM Rotor with Rotor-EZ (Hygain)

 
When using N1MM Rotor with my Rotor-EZ (for tailtwister) the 3 digit heading
display never goes off 000. Control from the heading buttons or the compass
rose do work. The compass rose does not reflect the heading when the antenna
is turned manually.

Do I have something mis-configured?

Mark n2qt

[Non-text portions of this message have been removed]




[Non-text portions of this message have been removed]

When using N1MM Rotor with my Rotor-EZ (for tailtwister) the 3 digit heading
display never goes off 000.  Control from the heading buttons or the compass
rose do work.  The compass rose does not reflect the heading when the antenna
is turned manually.

Do I have something mis-configured?

Mark n2qt


[Non-text portions of this message have been removed]

Paul, I am the one that lost my log.  It in fact was lost, not gone, but in
Windows 7 things that are there are often lost for a while.  Windows 7 has a
very fast search routine that only looks in certain places rather than
everywhere.  I finally reverted to DOS manual search techniques to find the
missing file.  I also had to find out about transaction files to know what I was
looking for.  I rebuilt my file from two transaction logs and all is well now
except for the contest time lost in sorting it out.  Still, I was able to make
377 Qs, so the contest was not a complete loss.

Since learning more about N1MM and Windows 7 were among my primary objectives
for this contest I will chalk it up to my learning curve.  I thank John and
Scott for their clues which helped me a lot in figuring out how to cope with the
problem.  I am immensely happy that I did not have to reenter any QSOs and that
my only loss was some operating time.  This forum was of great benefit in
letting me air my problem and get some clues.

I have been using N1MM for three years and this is the first problem of this
nature that I have encountered.  I have been using Windows 7 for a month and
Vista for two years before.  For those of you who are still with XP or older,
you have a real thrill to come when you upgrade.  It is almost as difficult as
from DOS to Windows.  But, I plan to stay with Windows 7 and N1MM.  I probably
will not get smarter, but maybe I will learn to cope!

  Willis 'Cookie' Cooke
K5EWJ




________________________________
From: Paul Mackanos - K2DB <k2db@...>
To: N1MMLogger@yahoogroups.com
Sent: Mon, December 14, 2009 9:29:41 AM
Subject: [N1MM] Re: Lost my 10 Meter Log


I just wanted to comment on this thread:

Twice, yes twice in the last two contests at the K2NNY QTH, we

ahd the computer crash from RFI problems, once during SS SSB

Contest when we went to 15 meters to pick up Alaska for our

Sweep, and once in the ARRL 160 CW contest. Both times it

Was RF overload, both times, when N1MM came back up,

All of the contacts in the log were there. This also happened

During the CQWW CW DX contest at the W2FU multi-multi

Station. I was on the 40 meter mult station, I hit the F2 key to

Send the report, and BANG, the whole room shut down, 160,

80 & 40 meters, all rigs shut off, all computers went down.

(Jeff W2FU was in the other room and turned on an electric

Oven) He did not know it was on the same circuit hihi.

Bottom line; we reset the breaker, all came back up, the network

Came back up, and the contact was logged. All computers re-synced

And away we go, back to contesting without a hic up.

N1MM is the best, we have never, never lost a qso or a log with

This program (like some others, which is why everyone here uses

N1MM).

Just my .02 cents worth.

Paul K2DB

8

[Non-text portions of this message have been removed]







[Non-text portions of this message have been removed]

Sorry...meant for Dave directly :(

73 es God Bless de KK1L...Ron Rossi (kk1l@...) <><
QTH: Jericho, Vermont
My page: http://home.comcast.net/~kk1l



Ron Rossi wrote:
> Dave,
>
> Does your test app read the settings from N1MM and use them as the
> starting point of always start from "default"?
>
> I was thinking the other day that having a sound setup window that
> allowed configuration without having to try and figure out what options
> 1, 2, 3, or 4 really meant would be great. When I opened your test app I
> thought "Wow. This is pretty close to what I was just thinking about". I
> have only just brought up the test app this morning. But I am logged in
> remotely and cannot really play with it. I will try it this evening when
> I am home.
>
> By the way I am playing with the WaveTestApp because I have changed to
> yet another sound card in my logging computer and was running into a new
> set of strange results which I am trying to work through without
> bothering anyone. For example my webcam mic gets chosen as the QSO
> recording mic even if I select my SoundMax AUX input for this.
>
> I run WindowsXP Pro SP3.
>
> 73 es God Bless de KK1L...Ron Rossi (kk1l@...) <><
> QTH: Jericho, Vermont
> My page: http://home.comcast.net/~kk1l
>
>
>
> K1TTT wrote:
>
>> If you are still having problems download this:
>> http://www.k1ttt.net/n1mm/n1mmwavetestapp.zip
>> <http://www.k1ttt.net/n1mm/n1mmwavetestapp.zip>
>>
>> Unzip it and put the exe file in your n1mm directory. Run it with the
>> original ocx and send me a snapshot of the report that it generates
>> when you
>> hit the 'report' button. and add a note about what version of the ocx is
>> displayed just to the left of the report button. Then install the
>> vista ocx
>> and repeat, send the snapshot of the report and what version of the ocx is
>> displayed.
>>
>> David Robbins K1TTT
>> e-mail: mailto:k1ttt@... <mailto:k1ttt%40arrl.net>
>> web: http://www.k1ttt.net <http://www.k1ttt.net>
>> AR-Cluster node: 145.69MHz or telnet://dxc.k1ttt.net
>> <telnet://dxc.k1ttt.net>
>>
>>
>> -----Original Message-----
>> From: K1TTT [mailto:K1TTT@... <mailto:K1TTT%40ARRL.NET>]
>> Sent: Sunday, December 06, 2009 15:42
>> To: N1MMLogger@yahoogroups.com <mailto:N1MMLogger%40yahoogroups.com>
>> Subject: RE: RE: RE: [N1MM] Sounds
>>
>> Yes, has been working fine here on vista for quite a while. I haven't
>> heard
>> any complaints from other win-7 users yet, but maybe there aren't
>> enough out
>> there yet. I'm getting ready now to order up a couple brand new win7 boxes
>> to replace some older machines here so I should be able to do my own
>> testing
>> shortly.
>>
>> David Robbins K1TTT
>> e-mail: mailto:k1ttt@... <mailto:k1ttt%40arrl.net>
>> web: http://www.k1ttt.net <http://www.k1ttt.net>
>> AR-Cluster node: 145.69MHz or telnet://dxc.k1ttt.net
>> <telnet://dxc.k1ttt.net>
>>
>>
>> -----Original Message-----
>> From: Gil rojomn Charter [mailto:rojomn@...
>> <mailto:rojomn%40charter.net>]
>> Sent: Sunday, December 06, 2009 13:55
>> To: k1ttt@... <mailto:k1ttt%40arrl.net>; AA/N1MM
>> Subject: FW: RE: RE: [N1MM] Sounds
>>
>> Has anything come of this? Have you found a way to send SSB messages
>> (Recoding not needed) with anything other than the default card?
>>
>> Gil Rochester ,MN W0MN
>>
>> ICC and twitter WzeroMN
>>
>> 44.082036N 92.513219W 1050'
>>
>> From: Gil rojomn Charter [mailto:rojomn@...
>> <mailto:rojomn%40charter.net>]
>> Sent: Thursday, December 03, 2009 12:23 PM
>> To: 'k1ttt@... <mailto:%27k1ttt%40arrl.net>'
>> Subject: RE: RE: RE: [N1MM] Sounds
>>
>> Did you read these lines. I think they tell what you ask
>>
>> Old
>>
>> This is shot 003 and 008. When Microphone is selected then input shows
>> microphone. Anything else it shows Blank.
>>
>> New
>>
>> This is shot 005 and 009. When Default is selected there is nothing. Any
>> other selection for card gives microphone on input selection.
>>
>> Gil Rochester ,MN W0MN
>>
>> ICC and twitter WzeroMN
>>
>> 44.082036N 92.513219W 1050'
>>
>> From: David Robbins [mailto:k1ttt@...
>> <mailto:k1ttt%40verizon.net>]
>> Sent: Thursday, December 03, 2009 10:25 AM
>> To: rojomn@... <mailto:rojomn%40charter.net>
>> Subject: Re: RE: RE: [N1MM] Sounds
>>
>> ok, so which is which? and i want to see what is in the input port select
>> list for each configuration, that is important to see if the ocx is
>> working
>> correctly.
>>
>> and what is that radio codec selection? what type of radio are you
>> using or
>> is that something from a microkeyer or some other interface?
>>
>> Dec 3, 2009 07:32:43 AM, rojomn@...
>> <mailto:rojomn%40charter.net> wrote:
>>
>> Gil Rochester ,MN W0MN
>>
>> ICC and twitter WzeroMN
>>
>> 44.082036N 92.513219W 1050'
>>
>> From: David Robbins [mailto:k1ttt@...
>> <mailto:k1ttt%40verizon.net>]
>> Sent: Wednesday, December 02, 2009 11:33 AM
>> To: rojomn@... <mailto:rojomn%40charter.net>
>> Subject: Re: RE: [N1MM] Sounds
>>
>> ok, one of the screen shots is interesting. i don't care what mmvari
>> shows,
>> nor do i care what you select for the top box where the so2r options are.
>> what i need to see are:
>>
>> with the old ocx:
>>
>> 1. the device select list box where it shows the cards
>>
>> 2. what shows up in the input list box when you select each of the
>> cards in
>> the device list
>>
>> This is shot 003 and 008. When Microphone is selected then input shows
>> microphone. Anything else it shows Blank.
>>
>> with the new ocx:
>>
>> 1. the device select list box where it shows the cards
>>
>> 2. what shows up in the input list box when you select each of the
>> cards in
>> the device list
>>
>> This is shot 005 and 009. When Default is selected there is nothing. Any
>> other selection for card gives microphone on input selection.
>>
>> Shot 007 shows that the offered directory when installing new ocx is
>> wrong.
>> This is after an uninstall of the old ocx which is required before it will
>> actually install the new one. It will not overlay it but offers to repair
>> it. Repair just leaves the old one.
>>
>> Dec 2, 2009 06:41:05 AM, rojomn@...
>> <mailto:rojomn%40charter.net> wrote:
>>
>> SORRY, forgot the attachments so here is repeat with attachments.
>>
>> I did the checks and am sending attached screen shots. You will see that
>> MMVARI works fine. It transmits the digital signal and that proves that he
>> sound card works. I am trying to use the same card for SSB wav
>> transmission.
>> When I try to do it I get the radio keyed , no error reported, BUT, sound
>> does not play.
>>
>> I don't know what else to do at this point. Your ocx is the one and only
>> only that is installed. I did the search.
>>
>> MMVARI ocx works so it is possible.
>>
>> The sound cards on the machine are the one on the motherboard conexant
>> and a
>> USB card. The on board is the one I am trying to use and the USB is set as
>> the windows default.
>>
>> Gil Rochester ,MN W0MN
>> ICC and twitter WzeroMN
>> 44.082036N 92.513219W 1050'
>>
>> SNIP SNIP getting too long.
>>
>> [Non-text portions of this message have been removed]
>>
>>
>>
>
>
> ------------------------------------
>
> To unsubscribe, send an email to:
> N1MMLogger-unsubscribe@yahoogroups.com
>
> Yahoo! Groups Links
>
>
>
>
>
>

Dave,

Does your test app read the settings from N1MM and use them as the
starting point of always start from "default"?

I was thinking the other day that having a sound setup window that
allowed configuration without having to try and figure out what options
1, 2, 3, or 4 really meant would be great. When I opened your test app I
thought "Wow. This is pretty close to what I was just thinking about". I
have only just brought up the test app this morning. But I am logged in
remotely and cannot really play with it. I will try it this evening when
I am home.

By the way I am playing with the WaveTestApp because I have changed to
yet another sound card in my logging computer and was running into a new
set of strange results which I am trying to work through without
bothering anyone. For example my webcam mic gets chosen as the QSO
recording mic even if I select my SoundMax AUX input for this.

I run WindowsXP Pro SP3.

73 es God Bless de KK1L...Ron Rossi (kk1l@...) <><
QTH: Jericho, Vermont
My page: http://home.comcast.net/~kk1l



K1TTT wrote:
>
> If you are still having problems download this:
> http://www.k1ttt.net/n1mm/n1mmwavetestapp.zip
> <http://www.k1ttt.net/n1mm/n1mmwavetestapp.zip>
>
> Unzip it and put the exe file in your n1mm directory. Run it with the
> original ocx and send me a snapshot of the report that it generates
> when you
> hit the 'report' button. and add a note about what version of the ocx is
> displayed just to the left of the report button. Then install the
> vista ocx
> and repeat, send the snapshot of the report and what version of the ocx is
> displayed.
>
> David Robbins K1TTT
> e-mail: mailto:k1ttt@... <mailto:k1ttt%40arrl.net>
> web: http://www.k1ttt.net <http://www.k1ttt.net>
> AR-Cluster node: 145.69MHz or telnet://dxc.k1ttt.net
> <telnet://dxc.k1ttt.net>
>
>
> -----Original Message-----
> From: K1TTT [mailto:K1TTT@... <mailto:K1TTT%40ARRL.NET>]
> Sent: Sunday, December 06, 2009 15:42
> To: N1MMLogger@yahoogroups.com <mailto:N1MMLogger%40yahoogroups.com>
> Subject: RE: RE: RE: [N1MM] Sounds
>
> Yes, has been working fine here on vista for quite a while. I haven't
> heard
> any complaints from other win-7 users yet, but maybe there aren't
> enough out
> there yet. I'm getting ready now to order up a couple brand new win7 boxes
> to replace some older machines here so I should be able to do my own
> testing
> shortly.
>
> David Robbins K1TTT
> e-mail: mailto:k1ttt@... <mailto:k1ttt%40arrl.net>
> web: http://www.k1ttt.net <http://www.k1ttt.net>
> AR-Cluster node: 145.69MHz or telnet://dxc.k1ttt.net
> <telnet://dxc.k1ttt.net>
>
>
> -----Original Message-----
> From: Gil rojomn Charter [mailto:rojomn@...
> <mailto:rojomn%40charter.net>]
> Sent: Sunday, December 06, 2009 13:55
> To: k1ttt@... <mailto:k1ttt%40arrl.net>; AA/N1MM
> Subject: FW: RE: RE: [N1MM] Sounds
>
> Has anything come of this? Have you found a way to send SSB messages
> (Recoding not needed) with anything other than the default card?
>
> Gil Rochester ,MN W0MN
>
> ICC and twitter WzeroMN
>
> 44.082036N 92.513219W 1050'
>
> From: Gil rojomn Charter [mailto:rojomn@...
> <mailto:rojomn%40charter.net>]
> Sent: Thursday, December 03, 2009 12:23 PM
> To: 'k1ttt@... <mailto:%27k1ttt%40arrl.net>'
> Subject: RE: RE: RE: [N1MM] Sounds
>
> Did you read these lines. I think they tell what you ask
>
> Old
>
> This is shot 003 and 008. When Microphone is selected then input shows
> microphone. Anything else it shows Blank.
>
> New
>
> This is shot 005 and 009. When Default is selected there is nothing. Any
> other selection for card gives microphone on input selection.
>
> Gil Rochester ,MN W0MN
>
> ICC and twitter WzeroMN
>
> 44.082036N 92.513219W 1050'
>
> From: David Robbins [mailto:k1ttt@...
> <mailto:k1ttt%40verizon.net>]
> Sent: Thursday, December 03, 2009 10:25 AM
> To: rojomn@... <mailto:rojomn%40charter.net>
> Subject: Re: RE: RE: [N1MM] Sounds
>
> ok, so which is which? and i want to see what is in the input port select
> list for each configuration, that is important to see if the ocx is
> working
> correctly.
>
> and what is that radio codec selection? what type of radio are you
> using or
> is that something from a microkeyer or some other interface?
>
> Dec 3, 2009 07:32:43 AM, rojomn@...
> <mailto:rojomn%40charter.net> wrote:
>
> Gil Rochester ,MN W0MN
>
> ICC and twitter WzeroMN
>
> 44.082036N 92.513219W 1050'
>
> From: David Robbins [mailto:k1ttt@...
> <mailto:k1ttt%40verizon.net>]
> Sent: Wednesday, December 02, 2009 11:33 AM
> To: rojomn@... <mailto:rojomn%40charter.net>
> Subject: Re: RE: [N1MM] Sounds
>
> ok, one of the screen shots is interesting. i don't care what mmvari
> shows,
> nor do i care what you select for the top box where the so2r options are.
> what i need to see are:
>
> with the old ocx:
>
> 1. the device select list box where it shows the cards
>
> 2. what shows up in the input list box when you select each of the
> cards in
> the device list
>
> This is shot 003 and 008. When Microphone is selected then input shows
> microphone. Anything else it shows Blank.
>
> with the new ocx:
>
> 1. the device select list box where it shows the cards
>
> 2. what shows up in the input list box when you select each of the
> cards in
> the device list
>
> This is shot 005 and 009. When Default is selected there is nothing. Any
> other selection for card gives microphone on input selection.
>
> Shot 007 shows that the offered directory when installing new ocx is
> wrong.
> This is after an uninstall of the old ocx which is required before it will
> actually install the new one. It will not overlay it but offers to repair
> it. Repair just leaves the old one.
>
> Dec 2, 2009 06:41:05 AM, rojomn@...
> <mailto:rojomn%40charter.net> wrote:
>
> SORRY, forgot the attachments so here is repeat with attachments.
>
> I did the checks and am sending attached screen shots. You will see that
> MMVARI works fine. It transmits the digital signal and that proves that he
> sound card works. I am trying to use the same card for SSB wav
> transmission.
> When I try to do it I get the radio keyed , no error reported, BUT, sound
> does not play.
>
> I don't know what else to do at this point. Your ocx is the one and only
> only that is installed. I did the search.
>
> MMVARI ocx works so it is possible.
>
> The sound cards on the machine are the one on the motherboard conexant
> and a
> USB card. The on board is the one I am trying to use and the USB is set as
> the windows default.
>
> Gil Rochester ,MN W0MN
> ICC and twitter WzeroMN
> 44.082036N 92.513219W 1050'
>
> SNIP SNIP getting too long.
>
> [Non-text portions of this message have been removed]
>
>

Scott, just click on File-Open log in data base and you get the form to change. 
In this case it will make no difference because the Cabrillo is the file that
the ARRL uses to determine your score and category.  But, for future reference,
sometimes it is important so it is a good practice to get it right.  In some
cases you may need to rescore current contest for the multipliers and score to
be correct.

  Willis 'Cookie' Cooke
K5EWJ




________________________________
From: Scott Ellington <sdelling@...>
To: N1MMLogger@yahoogroups.com
Sent: Mon, December 14, 2009 9:49:34 AM
Subject: [N1MM] Change Contest Mode?


After the end of the 10M contest, I discovered I had inadvertently set the mode
to "Mixed", rather than CW.  Is there any way to get back to the initial contest
setup window to change that?  (I did edit the Cabrillo log, with which the ARRL
seems happy.)  I have searched the manual and help files, without success.

Scott K9MA

Scott Ellington
Madison, Wisconsin
USA







[Non-text portions of this message have been removed]