I just bought a MT RTG FA and I want to install a switch to be able to select between the Primary and Secondary configurations. The manual I downloaded from...
The two connections closest to the front edge ( the 6 pin mini DIN input side) are both grounds. The outside edge, marked "SW" on the board is the external...
I just wanted to make a few suggestions to those who may have trouble programming their Micro-Trak's ( Or TinyTracks for that matter) If you are using a brand...
What are the correct configuration settings for voltage and temperature in Fahrenheit on the RTG? Both are being graphed on aprs.fi but I believe are incorrect...
I cant wait for this too! I was looking at the MT-TT4 and was pretty disappointed that it was discontinued. You know... If you bundled it with an appropriate...
Jeffrey, You would have thought so! ( thanks for reviving an old post too!) The two most unpopular products I have ever produced have been the MT-TT4 and the ...
Greetings The unit has finally clear customs and sitting in a Post Office in Vancouver Canada. I've downloaded the program and waiting to pick up a Female to...
Under the "Position" tab in TinyTrak 4 Alpha Config program, you would put a 'U' in the "Code" box (TSYMCODE) and a '/' in the "Table" box (TSYMTABLE) to get...
Thank You. That will be done as soon as the Package arrives.. 73 Don VA7DGP ... -- Don Poaps New Westminster, BC VA7DGP Satern Member Vector Member Metrotown...
Thank You Byron The Package Arrived. I'm now live as VA7DGP-14 in New Westminster, BC. Starting Tuesday. I'll be in Prince George, BC. This unit will be...
... I don't see TinyTRak 4 Alpha Config program. I did download Tiny Trak 3 Config program. Under the path. I see Symbol > Table / Would I delete > and add U....
http://wa8lmf.net/aprs/APRS_symbols.htm A symbol is actually two things, a table and a symbol within that table. / is the primary table and is sometimes...
Okay, I am jumping in late, but if you have a Micro-Trak of any kind (besides the now defunct MT-TT4) the TT4 Alpha Config is not the correct configuration...
Don, Take a look in the files and photo sections. I placed a .tt3 file that you can load directly using the FA config program, and a Screen shot under photos...
Looking on the web site. I really don't see something like a tour bus. The Yellow school bus will do. I understand the concept. I had BBS software years using...
It could be worse, the high altitude meteorological balloon guys I am sure don't really like to be see as a hot air balloon! Keep in mind, the symbol/table is...
... The problem is that on most systems using the standard symbol set, you don't get a vehicle icon at all -- just the letters "RV". Standard symbol set here: ...
But just to be clear, the RV symbol isn't a V symbol with an R overlay, it's /R or an R symbol in the primary table. It's just that the artist or programmer...
Oops, my bad. I thought you had purchased a TT4. Replace the '>' (symbol for car) with the 'U' (symbol for the bus). Google APRS symbol table and you will find...
Actually, given the absence of alternatives, we proudly fly our multicolored hot air balloon icons to the very edge of space :^)) Jim, N5IB LaACES student...
Thank you for your comments. I was able to change it to U. Its now a yellow school. It certainly will standout from the red cars I need to fine a null cable...
Just to ask but is there enough voltage to run the 8000FA if I want to use 2 18650 Li-Ion batteries to run it and what kind of output can I expect? I know I...
Someone will answer but I thought 7V was at the low range of operation. How about an 11.1V pack unless you are pressed for space? You could always turn the...
That's about right, at much below 7 Volts, the final amplifier starts to be a dummy load! Allen VHS Someone will answer but I thought 7V was at the low range...
