Thanks for the comments, Sam. It's good to know I am not the only one with the bouncing gauges. I went out and tested the system again today, and turned the...
... You will need a full-blown APRS application such as UIview or APRSpoint --AND-- a mapping program such as Precision Mapping (for UIview) or Microsoft...
I take it ferrite at "radio" end of the power cord didn't do anything for you? Perhaps using the regulator to charge a set of batteries is the way to go -- if...
It appears that the spam gods at Yahoo are punishing me for my hubris. I am sorry that postings are being held for so long before coming out on the group. ...
... There's a Yahoo Groups' setting buried under Management --> Group Settings --> Messages --> Posting and Archives (Edit) --> Moderation --> New members ...
I chose the option that I think allows that. New members have to be approved, but everyone else can still post. I hope its working. I have approved one new...
Scott and anyone else interested... It appear that Wayne VA7SWR solved his "wandering" problem. When a fixed beacon rate is used, the GPS receiver is turned...
I said... ... It was suggested to me that if it had "a threshold for HDOP values, and not just transmit the first fix is received from the GPS engine" it would...
Keith, Byon and I are discussing this right now. Allen VHS In a message dated 03/04/09 20:29:33 Pacific Standard Time, ve7gdh@... writes: I said... ... ...
Allen AF60F wrote... ... That's terrific! That would be the best of both worlds if it can be done. I realize the GPS was being turned off to conserve the...
Keith, Believe it or not I don't have a single MT-AIO where I am now. We theorize that setting the power enable for a longer time period may help the wobble,...
Allen AF60F wrote... ... Better than not having enough storage space for them on the shelf! ... I'll ask Wayne to give it a try. How many seconds would you...
Keith, We thought we would start with 10 Seconds and see if it got a better fix, and back down from there for power savings. The resistive array designed to...
Allen AF60F wrote... ... Unfortunately, Wayne wasn't able to try 10 seconds for power switch time. Perhaps this weekend. ... That's too bad. I wonder if a PC...
Keith, The GPS stays on during scheduled transmission periods, but the resistive array overwhelms the lower power GPS serial with its higher level RS-232...
Allen AF60F wrote.. ... According to the drawing in the manual, both are 10K resistors. However, I see on the pictorial of the circuit board and in the JPG you...
In a message dated 03/05/09 17:29:29 Pacific Standard Time, ve7gdh@... writes: Allen AF60F wrote.. ... According to the drawing in the manual, both are...
www.botskool.com active discussions on robotics free tutorials great learning medium ask your question on robots, embedded system, programming, micro ...
I am trying to gauge how much interest there would be for a Micro-Trak AIO (using an external handheld GPS, so I guess I would have to call it the AAIO-Almost...
... That would be a dream, I find the external GPS units now almost the same price as a external antenna, and more convenient. 10 watts is a very good power...
Garry, I know there are lots of people using APRS for a poor man's LOJACK system. The idea for a handheld is for a man portable (SAR) unit. The MT-TT4 with...
Allen, I'm in for at least one unit! Thanks, Hugh Smith From: MicroTrak@yahoogroups.com [mailto:MicroTrak@yahoogroups.com] On Behalf Of VHSProducts Sent:...
this is what I am looking for... I have an old commercial GPS mounted in the car and would like to have something small to fit in the case I already have......
