I have the LP-100 connected to the HF output of my amplifier. I also have a second output from the amp for my 6 meter antenna. My 6 meter antenna is about 6...
No, you can't damage the LP-100 in this way. There is the same 34 dB coupling loss between the LOAD connector and BNC ports as there is between the XMTR...
Thanks, it is the same receiver so no problem there. It's just a dead end into an open relay in the amp. That is a good point, however, because I may get a...
Any switching should probably use some sort of interlock I suspect, maybe driven by the band selection in the rig. I would think about a couple SPDT coax...
I am a proud new owner of an LP-100. It was waiting for me when I arrived back from a business trip yesterday. I read the book, loaded the software and have...
... Is split turned off and VFO A set for transceive? Plot controls VFO A only. I use it a lot with my TS-480SAT with no problem. I'll see if I can duplicate...
... Is split turned off and VFO A set for transceive? Plot controls VFO A only. I use it a lot with my TS-480SAT with no problem. I'll see if I can duplicate...
OK Bill. I'll add that to the list. Did you download the Plot help file? It has some info on setup, but needs more. I have a release version (1.0.1) of Plot...
... file? ... these ... Response: I looked at it before, but when I went to the web page, I only saw the Introduction part, and missed the detail below it....
I could not find this in the book. I selected the VCP-100 Setup Style display, and expanded the box down to include all of the fields that including the text...
OK Bill. Anything you remember about your algorithm would be useful. Email me any info you come up with. 73, Larry N8LP ... [Non-text portions of this message...
Larry, I am MOST enjoying the LP-100 PLOT,,,, and one things came to mind... maybe someone else has mentioned it... IS there a way to add text on the plot......
Thanks Bill. I still have fun playing with it myself, including the transmission mode which I haven't released yet. I have been asked bu others for annotations...
I finally attached a serial cable to my unit and computer to view the Plot and VCP. They both work fine but, since my computer display is about 10 ft. from...
Larry, didn't you distribute a CD with MCLoader and VCP on it when you shipped the first run of kits? If so, I cannot locate the CD. At any rate I need a copy...
Oops... didn't notice you sent from the group. I'll send it to your private email. 73, Larry N8LP ... [Non-text portions of this message have been removed]...
Good deal. Thanks, Stan ... From: LP-100@yahoogroups.com [mailto:LP-100@yahoogroups.com] On Behalf Of Larry Phipps Sent: Monday, May 14, 2007 1:44 PM To:...
I should reiterate the process of getting MCLoader for list members. Because it is commercial software that I didn't write, I can only distribute it to...
I have been playing with the "compression" screen, and have uploaded a beta version on my website. In addition to the compression screen, this version adds the...
Hi Larry, Thank you for posting the beta version. I am finding the instrument to be very useful. The other day I used the direct input to test the -7dBm output...
Thanks Bob. Excellent feedback on both counts. The direct input was added in response to a suggestion by Lee, W9OY I believe, who tried his LP-100 as a field...
Hi all I did some testing with the new compression function today. Using my FT-2000 I did find some rather interesting findings. Switching on the processor...
Arghh. I give up the table formatting. But I forgot to mention that audio was fed directly through the patch input in the rear of tcvr. 73, LA6TPA Geir...
I've added a mode that allows measurement of peak-to-average power... the long awaited "compression" mode ;-) Look back about 3 posts on the Group for a full...
It looked OK to me, Geir. BTW, I should mention to the Group that the power readings in this mode will not match the true readings in other modes, because no...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
