Greetings all, So far I have not hooked up my amp keying line through the LP-100 for SWR protection. I have simply depended on the audible alarm to alert me...
Jim, take a look at the SteppIR Tuning Relay page on my web site. It shows a method of protecting the amp without involving the relays. The basic idea is to...
I have been using firmware 1.1.49C for a few days now and I have noticed that when toggling between the W, w, and T modes, the button reacts very fast. In...
I'll take a look at it, Jim. Do you mean the reaction of the Alarm button when you push it, or the time it takes to step through the choices? The time between...
I was talking about the time to step through the various alarm threshold points like 105, 2.0, 2.5 and so on. I agree that those settings might be too slow...
I have posted version 1.1.50. It is basically 1.1.49c with a small bug fix and the Fast/Slow button slowed down a tad. 73, Larry N8LP ... [Non-text portions of...
Hey Larry I just flashed the LP-100 with the new firmware and the timings for the Fast/Slow button are much improved in my opinion. Thank you, 73, --Jim ...
Hey Larry, I guess you can't please everybody but I am with Jim on this one - the scroll time between the different SWR alarm set points as well as the scroll...
I was thinking that the power modes would be accessed with button presses, rather than button holds. The hold on the Alarm button is required because it has to...
Hey Larry, I am also changing the power modes by single click (no sense to scroll since they are only three. The thing is that sometimes when I press the...
Hi all, I guess this is latest firmware for the LP-100?? Is it Beta or Alpha?? What difference from v1149?? Thanks... 73's de Tony G8DQZ [Non-text portions of...
Hi Larry I am currently using version 1.1.50. I think there is some improvment over 1.49 but from time to time I still have to use extra click on the button to...
It's a release version. It cleans up a couple little bugs from 1.1.49c, otherwise it's the same. I guess I may be slowing down the response of the Fast/Slow...
I agree. Just make the fast/slow button so that each key press advanced to the next mode only, regardless of whether you tapped the button or held it down....
I second the motion! Mike WD4EFI _____ From: LP-100@yahoogroups.com [mailto:LP-100@yahoogroups.com] On Behalf Of Larry Phipps Sent: Thursday, April 12, 2007...
Dear Larry, I downloaded and installed V1150 last night and it all works fine, no problems at all. Ok I agree that the fast/slow buttons need only a light ...
Dear All, Not directly related but thought I would pick your collective brains?? In my set up I have physical connections as follows: Rig - Line isolator -...
Tony, what exactly are the line isolators? Are they current chokes or something? Do you have a model number or are they homebrew? Why do you have two? What was...
Dear Larry, These line isolators are manufactured by Radio Works in USA ( http://www.radioworks.com ). The one between the rig and amp is model T-4-500 and the...
OK, I'll take a look at them. It appears to be a ferrite current choke (coax wound over ferrite rod). I don't know why that would affect anything, but I'll...
How long is the G5RV? Jim K4JAF ... From: Tony Lord To: LP-100@yahoogroups.com Sent: Monday, April 16, 2007 9:28 AM Subject: [LP-100] Problems on 80m Dear...
Hi Jim, It's a full size G5RV, so 102 foot top section and 30 foot ladder. 73's de Tony G8DQZ ... From: LP-100@yahoogroups.com [mailto:LP-100@yahoogroups.com]...
Hi Tony Sounds like you have the same set as myself with the AH4 etc. I donot use any chokes, baluns or anything else and suffer no probs with RF. I run approx...
Thanks Trevor, That's exactly what I do and what has worked 110% well for past few years, so I was surprised that last night this happened, I am going to try...
I have just started construction and have noticed a minor issue. Parts List calls for R39 to be 120ohm. Diagram shows 91ohm. Also, supplied part (120ohm) is...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
