So .. does any one on this work at the repair facility for LDG ?? _________________________________________________________________ Hotmail® goes with you. ...
Yeah, Mike, the owner of LDG checks in here regularly. Dan, W1CDT Somers, CT ... From: "MIKE DURKIN" <Patriot121@...> To: <ldg-auto-tuners@yahoogroups.com>...
Ok, i was wondering if they email you when they receive a tuner in for repair or after its done or what is their process? To: LDG-auto-tuners@yahoogroups.com ...
Hello all. I just bought a new AT-1000Pro and I'm having a problem. I have an ICOM 746Pro and my amp is an ALS-600. All connections and setup is according...
I had a similar problem with my Icom 756Pro and the AT-1000Pro. Amp is an Acom 1000. I am going to assume the obvious that the AT-1000Pro is after the amp...
Irwin, Your're correct, the tuner is last in the circuit connected directly to both antennas. I tried your suggestion but I still have the same problem. 200...
Figured it out. As it turned out, I had to use both little cables, connecting the db-9s together and connecting the other ends to the tuner and radio. This...
I have an AT100 Pro and just ordered the v1.4 firmware upgrade. But, I'm just wondering what this will do? All that I read is that it is new and improved -...
I put up a Force-12 vertical antenna and was amazed how well I could tune it with the AT100 Pro on 80-6. But, recently, I'm having trouble getting a match...
Dwayne, My two tuners work fine. This is a question about why my Z11 QRP tuner tunes the antenna to a lower SWR than the Z11 Pro. Rig: Electraft K2 at 10...
OK gang getting ready to mount my 857D and wondering what auto-tuner would be "best". Need one that will auto-tune as the interior of my vehicle, a Chevy HHR,...
Hello all, I am having a funky problem with my Z100 on a Diamond CP6 antenna. The antenna is very resonant on 6M however when the Tuner is in-line I cannot...
Hi Rick, The upgrades are improvements to the tuning algorithm. You may or may not see a difference depending on your antenna. The improvements generally find...
Rick, What is the SWR of the antenna in that range without the tuner in line? The tuning range of LDG tuners is limited (as compared to the HF range), so if...
Sarge, This is a difficult problem to solve and we're working on some solutions. LDG does not currently make a tuner where you can use the Tune button on the...
I have a at-200pc that I used with n4py software and ten tec gear. I no longer have that setup,but still have the tuner. AND no way to control it. Does anyone...
Does anyone have info on modifying the Z-100 to operate from an internal battery? Or the possibility of powering the Z-100 from the CAT interface? W4RT shows a...
Dwayne, I'm loooking at the Z-11 Pro. It to does the automatic mode and size wise I think would be a better fit in my VERY limited space. Opinions? Sarge...
Hi Bob, There's just enough room to fit two 9 volt batteries inside the Z-100. I used a tiny bit of hot melt glue to hold them in place. The tuner is...
Speaking of strange - it turned out to just be the length of coax that ran between the rig and the antenna switch. I changed it slightly and it's OK now. I'm...
I had built qrp autotuner from kit when LDG selled first and am using until now with pleasure. But my qrp autotuner has no latching relay, so when I turn off...
... I'm not Dwayne, but I am the other Sarge..;-) Here's my 857D with the Z-11 Pro. Works great on nearly every piece of metal I can throw at it. Craig 'Lumpy'...
Earlier I wrote: Here's my 857D with the Z-11 Pro. Works great on nearly every piece of metal I can throw at it. SORRY forgot the link. Here you go - ...
Dongil, The first LDG QRP Autotuner does not have latching relays, so it does not store the tuner settings when DC power is off. Also, it does not have...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
