The current issue of "The ARRL Contest Update Newsletter" has an article and link to a description of the antenna system used at Mellish Reef. The URL is...
I have a LDG AT-100Pro for my Yaesu FT-857D. I have the cable connected from the Accessory connector to the LDG. Are any special settings require in the...
The reason I ask is because when I plug my AT-100Pro into the Accessories jack of the FT-857D it does not respond but when I unplug it the tuner functions...
Doc, Check the cables again to see if they are plugged into the correct jack. Yeasu made some radios with a Red jack for the Key and some people plug the Red...
I was very careful about that - because my rig is mounted in an top-opening aluminum case I even used a dentists mirror and flashlight to be certain I was...
Doc, What do you mean by "used another cable"? If it's not wired like a Y-ACC cable, then it will not work. The cable keys the radio when the tuner is tuning....
It's not a standard male stereo to male stereo 1/8 jumper? I guess I can find a right-angle stereo adapter but a cable with a right angle connector hard-wired...
From the manual: Using LDG's DTS-4 Intelligent Desktop Antenna Switch, you can instantly connect up to four separate antennas with the press of a button. Your...
Doc, Ok, that is the problem. It is not a standard 1/8" jumper. It would be best if you go to our web site and read up on the Y-ACC cable. Here is the link to...
Easy way to think about it. Z11Pro saves up to 4 settings for each memorized frequency. When you transmit it tries each of the 4 setting to see if one of...
hi all i have a ldg z11 pro tuner on a 80meter doublet fed with 450 ohmm ladder line i have added a ldg 4.1 balun to ladder line will now tune on 80 mtrs,but i...
Don't know if you got an answer but I have same problem with my PROII and then sometimes it won't even transmit. I finally gave up and uplugged the data...
Folks, We are heading to Dayton and will be in Booths 114-115. Drop by and see the latest LDG products. In addition to our W4RT Electronics products, including...
... Hi Derek - What's the length of ladder to balun and then the length of coax from balun to radio? What mode (SSB, CW etc) are you in when you're reading the...
Hi Barry- You wrote: "We will offer the miniVNA at the Dayton Hamvention at a VERY special price!" Any options for those of us who cannot make it to Dayton...
It is going to be the same deal for the ones not going to Dayton? I am interested in one. JT Folks, We are heading to Dayton and will be in Booths 114-115....
Hi Briggs and Juan, What I am doing is making a list of those wanting the miniVNA at the Dayton price. Since I am getting a special deal, I can only sell stock...
Questions, please? 1. Since the posted price at http://w4rt.com is $398. 99 what is the Dayton "special price", please? 2. I own a MFJ-269 which also covers...
... using 37ft of ladder line and 35ft of coax, mode ssb radio only showing 20 watts out on ssb , also use a kenwood ts 570 with this antenna using the radios...
There is one comparison (dated 2006) of antenna analysis devices here: http://www.arraysolutions.com/Products/aim_comparisons.htm#top%20of%20page It does not...
We've not seen any issues with the 746 and 756s keying on power up, but the radio does send a reset command to tuner when it powers up. Maybe the tuner is...
... Assuming you're using the internal meter on your radio and I don't know what kind of meter it has - 20w showing on the meter on SSB may be quite normal. ...
Hi Doc, I have used both and strongly recommend the AIM4170 over the mini-VNA. The AIM has a true phase detector (the mini does a math estimation which gets...
Hi Doc, I too was debating the difference between the mini VNA and the AIM 1470C. I really like the information available on the AIM unit but I wanted ...
That is a good point (portability as Charley mentioned) that I failed to note in the mini-VNA's benefit in my previous reply. The mini-VNA is powered from the...
The AIM4170C can be battery powered. The Quick Start document has the following to say about this: Quote The AIM4l70 can be operated on battery power for...
Hi Dwayne, Are there any plans to develop a AT200Pro control cable for the Yaesu FT-950 (or FT450 or FT2000). I saw a product by BetterRF company which can be...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
