I am thing about getting the 100Pro tuner. I have a windom dipole that the built in ATU will not tune for 160, 30 meters. The antenna is supposed to cover 160...
Scott, We're sorry that you had issues with your interface. However your statements are not entirely true. We discontinued the K-OTT because the newer Pro...
I had one of the AT-100Pro autotuners which worked fine. However, on a friend's advice upgraded to the AT-200Pro and found it to be far more capable. It tunes...
I have several rigs in the shack all of which are connected to an LDG AT100 pro tuning a 300' horizontal loop fed with 450 Ohm ladder line via a 4:1 balun. My...
I also have to agree with Scott. The K-OTT is nothing more than a glorified power cable when using the TS2K. Had I known that before I bought it I wouldn't...
Leonard and Scott, We've already covered that there was not enough information for us to say there was a problem with the interface. Not all TS-2000s have this...
I have a better idea. Why don't you send me full schematics for the interface so I can see if I can modify it to work correctly? My previous experiments with...
Leonard, That's a good idea. The problem area is in the software, so the schematics won't help you all that much and we don't send out our software source...
Ok. Guess that explains why it was discontinued rather than fixed. ... -- Leonard K. Pennock AD7AS Those who walk bravely through life, unafraid of loss or...
Dwayne, I have a Kenwood TS-480 HX. If I get the control cable, will this work properly with the AT-200Pro. Are their any know problems with these two pieces...
I use a 200pro with my 480HX with no control cables. I merely redefine the PF key to "TX TUNE" , place the 200PRO in auto mode and use the PF key for a tuner...
Den, I was afraid that this thread would go in this direction. Let me back up and give a little more general info and hope it does not cause more confusion. We...
Ben, Excellent solution! Dwayne Kincaid LDG ... redefine the ... key for a ... that ... the ... are bi- ... inputs ... had ... have ... it ... radio ... an ......
Instead of getting power from the battery with a fused line for AT-200Pro, would it be possible to get power from one of the connectors on the Kenwood...
Thanks guys about using the PF key. At home, I have the MFJ-993 that does it this way. Tuner is set up for auto tune, and works nicely. If I use AIRMAIL...
Den, You can get 12 volts at 1 amp from the tuner port (on the rear panel). But it sounds like you may already using that for the turbo tuner device. If it's...
Dwayne, Sounds like this may work. When I go into parking mode for the inverted-L antenna, plan on switching connectors on the radio rear antenna connector...
AT-1000 Pro Autotuner....New just got this weekend..not tuning 75 mtr band. I know I read the instructions a number of times to make sure I am not being...
Hi All, I'm enjoying the new tuner, but I'm a little miffed why they didn't make the antenna switch function work without having to turn on the tuner....
I think a call to LDG is in order. I have a feeling that there may be a problem with your new tuner. Have you tried tuning into a dummy load? My 1000PRO...
I have an 80m loop on Ant port 1 and my SteppIR on port 2. I switch the antenna to 2 (LED off) and then turn off the tuner. Port 2 is now in bypass mode. Dave...
... Would it be OK if the tuner section was bypassed but the tuner powered up? Just tapping the "Tune" button will toggle the AT-1000Pro in and out of bypass....
Yes, it is fine for one antenna.......however what if I would like to just have antenna 1 without the tuner in line? Seems like it would have been a better...
Hello Gary, I didn't even think of that - but that seems to be the only way to do it. I'll just have to live with the tuner being on for one of the antennas...
Hello, Just a follow up on this discussion on the antenna switch for the AT- 1000Pro. There is a lot of flexibility in the tuner, so I think it already does...
Hello Dwayne, Thanks for the response. When it is explained the way you have, it all starts to really make sense. I tried to simplify an issue that had more...
Been using this tuner very successfully with FT-857 and Y-ACC cord. How do I go about using it with the FT-450? Is there any way to automate tuning with the...
David, We do not have a control cable for the FT-450, so there are no control cable schematics. You would use the tuner by transmitting a carrier and pressing...
Not having access to an actual radio I can't verify this. Looking at the manual for the FT-450 on page 8 it appears that pin 10 of the liner jack could be used...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
