Hello Choose a building for the K-OTT cable around the Z-100 at Kenwood TS- 2000 to operate. Please e-mail with the instructions to me .... Thx Hallo Suche...
Yes I understand it has no auto tune with the TS-430S. I tried to key with low watts on AM while keyed and push the tune button, but it would not tune. I have...
Pete, The engineering answer is yes, it could be modified to allow higher power. The practical answer is no, it's waaayy more trouble to modify one than it...
Contemplating buying a IC-7000 while they still have the rebate on and wanted to find out what my tuner options are. I currently have a nearly mint AT-11MP...
Hmm, thats weird. Only things that I can think of are maybe 1) Is the tuner getting proper power?, and 2) Bad RF patch cable between the radio & tuner? or 3)...
Has anyone tried using the LDG AT897 tuner with their FT100D or FT857D? It looks like it should just plug into the CAT control pigtail and get power from that...
John, While you can get the DC power from any CAT port, the FT-100D does not have a comapible ACC port. The FT-857 does have a compatible ACC port, but no...
This isn't exactly about auto tuners, but I do own a Z-11Pro and an AT- 100Pro. I have been using A DTS-4 for some time to switch antennas and a dummy load....
Ralph I have used a long wire of about 50m of fine insulated wire on a kite with a Z100 and an IC706 without a balun and a few radials of 5m to 10m. This...
Why waste your money on other antenna analyzers that shows only measurements at a single frequency? Now view in real-time all parameters over any portion of...
AT-1000PRO Power rating HF (1.8 to 30 MHz): 1000 Watts Single Side Band 750 Watts CW 500 Watts Digital (RTTY, Packet, etc.) 6 meters: 250 Watts (any mode) 73...
Hi; Sorry if this is an old item, but I don't see it in a group search. I'm a newbie to the group. I've been using a wire antenna land mobile in Australia,...
Has anyone tried an AT-1000 Pro with a G5RV (full size - 102 ft.) on 30M? My G5RV has an SWR of around 8:1 and an impedance of about 450 ohms at 10 MHz. VP6DX...
Craig, My guess is that being at 8:1, it's real close to being out of the tuner's range and probably will not tune very well. Please let us know what you have...
I have been using the z-100 with the interface cable to my ic706mk2g with great success by pushing the tune button on the z-100. I like the interface cable...
Hi Dwayne, I thought that it might be close. I found that I could match it with my Kenwood TL-922 amp (reduced power) and made the contact. I also found that...
I am thing about getting the 100Pro tuner. I have a windom dipole that the built in ATU will not tune for 160, 30 meters. The antenna is supposed to cover 160...
Scott, We're sorry that you had issues with your interface. However your statements are not entirely true. We discontinued the K-OTT because the newer Pro...
I had one of the AT-100Pro autotuners which worked fine. However, on a friend's advice upgraded to the AT-200Pro and found it to be far more capable. It tunes...
I have several rigs in the shack all of which are connected to an LDG AT100 pro tuning a 300' horizontal loop fed with 450 Ohm ladder line via a 4:1 balun. My...
I also have to agree with Scott. The K-OTT is nothing more than a glorified power cable when using the TS2K. Had I known that before I bought it I wouldn't...
Leonard and Scott, We've already covered that there was not enough information for us to say there was a problem with the interface. Not all TS-2000s have this...
I have a better idea. Why don't you send me full schematics for the interface so I can see if I can modify it to work correctly? My previous experiments with...
Leonard, That's a good idea. The problem area is in the software, so the schematics won't help you all that much and we don't send out our software source...
Ok. Guess that explains why it was discontinued rather than fixed. ... -- Leonard K. Pennock AD7AS Those who walk bravely through life, unafraid of loss or...
Dwayne, I have a Kenwood TS-480 HX. If I get the control cable, will this work properly with the AT-200Pro. Are their any know problems with these two pieces...
I use a 200pro with my 480HX with no control cables. I merely redefine the PF key to "TX TUNE" , place the 200PRO in auto mode and use the PF key for a tuner...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
