Don, Icom connector, starting from flat end: 1 GROUND, for power plug and stereo plug 2 +V (center of power plug) to tuner, 3 medium sleeve on stereo jack, 4...
Has anyone ever had their RS-232 connector on their RT-11 burn? My unit started acting flakely and would appear to tune but, after it stoped tuning, the...
Did you get this fixed yet? Mine is doing the SAME thing. The tune button on the radio or mic will not do anything. The inside button will do all it says it...
Dennis, Do you think you maybe got a close lightning strike? Clearly not a direct strike since the tuner was not totally smoked. Maybe a close strike started...
First of all, hello to all.... Second... as you can probably guess, my AT100Pro tuner started behaving strangely this evening. It has been working VERY well...
Hi Vern and Others... Sounds like the Eprom has dided or got corupted??? I would send it back for a look over; I have the LDG Z100, it also quit working on 20...
Hello all, Allow me to start by saying "I am new." I own a yaesu 857d and use it mobile. I would like to take it in the house and use it there as well. Except...
Hi Joe, First off, welcome to hobby. A Random Wire antenna is just that, Random in length, not cut to any specific length for any specific band. However, my...
I personally in my summery house to the sea located in Terracina (100 km south of Rome) use one a random antenna made in this way: a fishing rod in glass...
hello, Gianni Marconi i just wanted to let you know that 1/2 the pictures dont work on the web page dont know if you was aware of this or not but tnx for the...
On Tue, 2006-06-13 at 08:26 +0000, lillo_boy2003 wrote:
> I personally in my summery house to the sea located in Terracina (100
> km south of Rome) use one a...
Joe, A "random wire" at the end of some coax can cause problems, especially if there is no counterpoise or ground for it to work against. The losses in the...
Have had the AT-7000 for about 1 week now, and I have to say it is really a piece of work. Compared to the AH-4 (ICOM), it can't tune to save it life. I use...
Hi, My question is why do you need a tuner with a Hamstick? I am using Hamsticks with my Kenwood TS-480 and I turn off the internal tuner. You can adjust the...
Well, if you have an internal tuner, you may not need an AT-7000. Aside from the relatively inefficient use of single-band Hamsticks on multiple bands, you...
Hello K2WH, The AT-7000 is not the same type of tuner as the AH-4, so we would not expect it to perform anything like it (good or bad). If the tuner (this goes...
OK, I didn't realize that you were trying to tune them on a different band. That explains the high SWR. I use one per band with quick disconnects. The ...
hi.actually i am new in ham radio.just wnt to know all about radio equipment.nice to meet you.hopefully we can share it.from malaysia.73Craig Bradley...
... Hi Bill, I think you had just answered your own question. The AH4 tuner must be mounted near the base of the antenna due to its high voltage, single wire...
Craig, In my experience, with multiple mobiles, different mounts, I have never been able to get a good match on any Hamstick. You may be able to do this in a...
Ken, Thanks for your input on this problem. Yes, I agree, that the tuner should be placed close to the antenna. I placed the tuner at the rig (706mkiig)...
Bill, If you look at the printed catalog from the Lakeview Company, the manufacturer of the Hamstick antenna, you will see that they recommend an inductance...
I have had very good luck with Hamsticks on my mobile and I have SWRs better than 1.5:1 on all bands, most bands better than 1.2. Getting a good ground ...
HI ! I have purchased a new Z-11 Pro a couple of months ago from Hamstop on Ebay.The tuner does a fantastic job on HF but seems to have a problem on 6m.It is...
... ________________________________________________________________________ A 6 meter antenna is so short and simple , why not just use a resonant antenna. At...
... should ... supplied ... another ... you are, ... Hi Bill, I use a binding post to SO-239 adapter to allow the connection of a single wire to the center pin...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
