Hey Jery, I see the pics you just posted, looks good. I know the UltraProp starts at 59", but I don't recall what diameter you plan on cutting it down to. How...
Mikey: The entire length is 31 inches from the front of the mounting rails to the forward face of the prop hub. The mounting rails will butt up against the...
Heya Jerry, I think I understand what/how you're doing it. Do you think you can build in provisions for thrust angle adjustment? Even with the model flying,...
Mikey: I have 17 and 3/8 in. or 442 mm. Remember that there is a 7 1/2 mm offset at the rear spar. The rear spar attach plate is only on one side but centers...
Pioneer aviation at its best!! Tony F. 1 of 1 File(s) Image removed by sender. <http://xa.yimg.com/kq/groups/76071/821523873/name/Flying%20Pingu1%2Ewmv> Flying...
Hi Tony and all, This message is coming from my wife's computer. Earlier I was checking in and watched the "Intrepid Aviator" Pepsi commercial video. My...
Hi Mikey B, I sent the Intrepid Aviator clip. Before I sent it I checked it for nasties and it came up clean. I've just had a look at my virus and malware ...
I ran into that a bunch of times at work and at home on the kids computer Mikey. It is a common rogue virus but from the description, this one sounds a bit...
Tony, I'll take your word that the video was clean. The virus probably came in some other way and just activated then. (BTW, the commercial was hilarious!) I'm...
Some time last year, I ran across this nasty little bugger, and it caused  me about a hundred hours of work to isolate, and capture the thing....it was on all...
I did run into one once not long ago that I had to google it on another computer, find out how to disable it, start in safe mode and rename the file then start...
I agree, Malwarebyte caught a sneaky trojan picked up a few weeks ago from viewing a Janowski website in Russia. This was a hardrive control virus that...
I may have been lucky, but so far this is the only issue I had with any viruses, the day after my protection expired... LOL Was using Trend Micro Titanium, and...
Hi Jerry, Shimming the forward or aft motor mounts is probably the easiest way to adjust the thrust angle. But if you did want to pivot the entire assembly, I...
David: I doubt if anyone really knows but I will hazard to guess. The J1 was designed to be used by glider students as a small low powered motor glider...
David, To the best of my knowledge, any explanation can only be conjecture as the designer seems to have no desire to support his older designs. Janowski was a...
Hi Jerry You have created a landing composite landing gear. What epoxy did you use and how many layers of cloth and what type of cloth? Regards Andre'...
Andre: Sorry that I haven't responded until now. I was on location with the Model T reality TV Show. Everthing went well with my Navigator and I winning the...
Altair: I have been working on the engine lately. A lot of travel has kept progress slow. After I run the engine on the stand for a while I will proceed to...
excellent job, Jerry.    if you can go posting pictures ....   what changes you made ​​in the project? I am very interested ineverything...
Altair: If you have followed the threads on the web site you will find the list of changes that I have made. I assume that you have already looked at the...
Hi all I'm the new kid on the block. Back when Alpha Aviation was selling J-1B plans I picked up a set... well life got in the way and they were lost. So I...
Femm: Let me be the first to welcome you to the site. We have several members that are making changes to the basic Janowski design. You should fit right in. I...
I know far to many people like that in my life. A number of my domestic partners were like that in the past. Well one of the first changes I would be...
Hi welcome to the group Kristine, Hey we are not the mad ones who thnk if i change this and if i do that, the spam can drivers are the mad ones. They dont know...
