Hi Not much happening on the forum Been buisy machining cylinders for my v twin lots ,of metal to remove i will post some pictures later Regards John...
OK, that certainly takes care of the first two questions. That leaves "What do you want to do with the engine, which you've already answered. I' sure that...
Telly Its usually best to preface your request for opinions by first telling your own capabilities.Simply saying upfront that youre a machinist with fully...
though I may not know much about steam engines, I am a Journeyman machinist with a full working machine shop at my disposal, just a taste of what we got. *...
... IMHO, it depends on your experience in machine work, the tools you have available, and what you want to do with the engine. And if you're at all lacking...
... It's <http://hasbrouck.8m.com/>, and if you click on the first link in the footer (see below) that will take you to the group home page. Click on "LINKS"...
i am also building a #10,which is intended for compressed air . I have used bearing for the mains and the big end .Have used bronze bushes for most of the...
I have a question for any of you folks who have built or are in the process of constructing Mr. Hasbroucks #10 engine or #5 for that matter. I have taken a...
Just out of idle curiosity, for now, is the #8 2 cylinder V an oscillating engine, or are the cylinders mounted solid with cross heads and conventional valve...
... hi Bob, We appear to be in a minority LOL.I have completed my bottom end and the ecentric' all good i am pleased to say ,big old crank it is !! Thanks for...
Will I am also building engine # 10. I also looked at these 45 degree holes for a long time before I determined that they are slotted out to .625. Looking at...
hi , I am well on with the production of an engine #10. i do have a question ,the steam passage from the valve chest through to the cylinder bore at an angle...
Doug, welcome to the hobby. There is a possibility you might not find anyone willing to be a tutor. However, you can get a good foundation in the hobby by...
Hi I am rather new to the metal working hobby and was wondering if any body might be in the Boise Idaho area. I live between Nampa and Caldwell. I am...
Today kicks off a new group that some of you may be interested in joining. It is for Rockwell, Rockwell/Delta, and Delta branded drill presses, although...
I grabbed the Mac version of eDrawingsViewer and found that it could not open some DFX files I grabbed off of the net. As it turns out I have two versions of...
... DXF is SUPPOSED to be a "universal" format but obviously is not every time. The files were translated into DXF using MasterCam X which is the latest...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
