Hi Made a start on the base & back plate i had some nice 10 mill plate so i am using this. I have put some pictures in the photo section (MT NO 8) Regards John...
I just completed Rays' Mill Engine #3, but in a vertical configuration. It has a 1.25" bore and was scaled directly from the plans for the #3. I've built the...
dear Friends, It is years ago that I asked whether there is anybody willing or interested in building a larger version of the #8 engine. Some engineer warned...
Eckart, Where are you located? Upon rereading this message, it seems more than disjointed..... Chalk it up to "free thinking" Couple things to remember, A....
I have uploaded photos of my #8 engine. Progress is slow but the end is in sight. The crank turns over smoothly by hand and the connecting rods go up and down...
... Nice work, thanks for sharing. I always enjoy seeing what others are doing, that I might get to someday. Just too darn much fun to have and not enough...
I built mine about two years ago, double size. It is very powerful, and will run so slow you won't believe. Fun to watch, too. Greg ... [Non-text portions of...
Those were probably from me and are in the CAD drawings #8 engine folder. I have been posting DXF files for a fellow in Germany who is new to the group and is...
I have added the rest of the files I have for the #8 engine. If you are going to use any of these files for CNC machining be aware that they worked for me but...
I tried opening some of the dxf files into Autocad version 14 and most didnt open for me.. I wish I understood more about the softwares and compatability... I...
Wow, that does work real well thankyou very much...!! Steven ... From: dwmgmt To: HasBrouckEngines@yahoogroups.com Sent: Saturday, September 26, 2009 3:39 PM ...
... DXF is SUPPOSED to be a "universal" format but obviously is not every time. The files were translated into DXF using MasterCam X which is the latest...
I grabbed the Mac version of eDrawingsViewer and found that it could not open some DFX files I grabbed off of the net. As it turns out I have two versions of...
Today kicks off a new group that some of you may be interested in joining. It is for Rockwell, Rockwell/Delta, and Delta branded drill presses, although...
Hi I am rather new to the metal working hobby and was wondering if any body might be in the Boise Idaho area. I live between Nampa and Caldwell. I am...
Doug, welcome to the hobby. There is a possibility you might not find anyone willing to be a tutor. However, you can get a good foundation in the hobby by...
hi , I am well on with the production of an engine #10. i do have a question ,the steam passage from the valve chest through to the cylinder bore at an angle...
Will I am also building engine # 10. I also looked at these 45 degree holes for a long time before I determined that they are slotted out to .625. Looking at...
... hi Bob, We appear to be in a minority LOL.I have completed my bottom end and the ecentric' all good i am pleased to say ,big old crank it is !! Thanks for...
Just out of idle curiosity, for now, is the #8 2 cylinder V an oscillating engine, or are the cylinders mounted solid with cross heads and conventional valve...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
