I haven't seen that many attachments in our mailings. Our files and photo areas are still open, so there is an alternative to attachments. I know MLProjects...
True but that situation was considerable different. The group was receiving 10 to 15 virus attachments *every hour* from a hijacked ID and was being jammed up....
I purchased one of those conversion kits from 16 TPI to 20 TPI so the readings on my mill and lathe (an Atlas) would match. The dials are plenty accurate if...
John: I think you received a bad part. First, I am assuming that you are talking about the forward-aft motion when you say X-axis. That's the way it is labeled...
John: When I did the MM mod on my lathe, I had a little trouble with the springs (granted, they're wider than what's shown for the mill). I had to press the...
Probably a good idea. Thank you. Man I hate doing this. Barry Young ... __________________________________________________ Do You Yahoo!? Yahoo! Health - Feel...
Hi Dave: I did make it so that only members can post. I hope that will be enough. Barry Young ... __________________________________________________ Do You...
just wondering if anyone has any feedback on this one, really looking for more of a "second operation" type machine.... has no one picked one up, or seen one...
need the part # for the int. gear on the grizz mini... the gear that meshes with the motor gear.... the one that you see when you take off the motor, that is...
Check www.littlemachineshop.com . You can find the number by the description, and its replacement cost. Graciously, Jim Lakewood, CA All Hail Rube Goldberg!...
Will the mill and lathe replacement parts that LMS sells also fit the Homier 7x12 and mini-mill? Which are the correct parts (HF?)? Thanks, Brice Clisby...
As I understand, yes. And if there's a difference, it'll be noted. They have one of each at their business, IIRC. Graciously, Jim Lakewood, CA All Hail Rube...
Hi all. I've decided to take the plunge and add caliper-style DROs to my mini-mill and I've got a few questions for those that have done this. 1.) What sizes...
I have another DRO system, but mounting it was little problem. Mostly drilling and tapping attachment points to the fixed and moving parts. i used 2 1" pieces...
Some people have actually used digital calipers to set up a DRO system. I assume you are talking about the digital scales that are designed for this purpose....
thanks guys, spoke to Chris @ lms, ordered the gear, plus a complete set of replacement gears, and some other doo-dads.... he is very knowledgeable about the...
I saw a few folks talking about it being a pretty good unit so I purchased one a couple of months ago (same price). Much nicer than I expected! You should...
Hi everyone, Am a newbee...so please bear with me. Looking for advise. Recently obtained HF Minimill and Lathe as a gift (my wife, what a sweety!) and am...
Thanks Brian! Looking at several reamer sets. Also a drill set. HF has their 115 pc set (part # 1611) marked down from $59.95 to $39.95 right now. Going to...
... I ... helpful. ... Do you know the full HF catalog number to go with that price? Using 47052-0VGA brings up the regular $99.95 price. Thanks, Bob Wilson...
... Click on 'Order From Printed Catalog' on the left-edge of the Harbor Freight homepage. Enter the number above, click 'Add to Order', and it'll come back...
I'd add a couple of dial indicators, one with a simple magnetic base and one with a adjustable arm magnetic base. These will come in handy for tramming and...
Has anyone tried the belt-dirve mod that's in the current issue of Machinist Workshop? Is it different from the one that was posted on the mini-lathe site...
... All - I appologise for this post! I no sooner posted it than I did what I should have first and did a search! I guess we sometimes forget about that. Many...
